idle

  1. Bandit5.4

    Vacuum leak symptoms and cruise control engagement

    If i had a vacuum leak, would not the boost gauge read 0 in. Hg at idle? It reads 20 in. Hg now, but Idle seems rough and I'm trying to rule out vac leaks or IAC, which i have not tested yet. Also, the cruise control seems to be delayed in engaging, like it takes 2-3 full seconds or more before...
  2. R

    Randomly running rich

    So i have a 99 cobra (terminator engine) built with diamond pistons, slightly higher compression. I recently started having an issue where it will be full rich 10.0 on the wideband. Cruise around and itll go back to 14.2-14.5 while cruising around, then ill apply a little throttle to get over a...
  3. M

    Please help!

    04 Cobra 2.76 Eaton 340lph pumps pulse width modulated Bolt ons 60 lb. Injectors The car was tuned remotely and runs strong under wot. Tuned to lambda of 0.78 at wot and did all part throttle stuff. Week later I noticed an idle puls . It happens if I clutch in and go into neutral at any kind...
  4. sjscott

    Throttle hang... position sensor data logging makes no sense

    Ok, kind of long description but trying to be as throught as I can. My recently acquired 98 Contour SVT has a bad problem with throttle hang. It's throwing a check engine light for code p1120 (tps, ratch too low) and when first starting it up it runs ok but seems as it warms up it gets...
  5. CaliGT500524

    Coil on Plug Opinions

    Hi all, I am looking for you opinions on aftermarket Coil on Plugs. From what I have read, everyone seems to split on the aftermarket vs. factory COPs in this particular case. I understand that the stock COPs can support 800+ horsepower, and that they'll do it just fine, but does that...
  6. Oki96Cobra

    Rough Idle through WOT with heat light

    Hi from Okinawa! Well I am probably the only 1996 Cobra on this Island and I am looking for a little help from you guys back home. I picked up this car with 57,000 miles and have done the simple tune-up items such as plugs (AL 764) Oil/PCV/Idler/Tensioner/MSD Coil packs/K&N Filter/fuel...
  7. F

    '00 GT Automatic Dies, Comp Cams need help.

    Hi everyone, new to the forums. I own a '00 GT automatic and here's some background into the situation. Started a year ago, my brother in law rebuilt the motor and in the process of doing so, had installed Comp Cams 262AH stage 1's. A year later after the rest of the work I have the car back...
  8. S

    Need help!!!

    PLEASE HELP! Hey guys it has been a while and just got my second L it is a 99 red with a PRO-M CAI system and MAF everything else is stock from what I can tell, the L has just over 26k miles but has been sitting for very long time dont know how long, got it from a dealer here in Honolulu and it...
  9. engine281

    Does anyone know how to test a MAF?

    Does anyone know how to test a MAF sensor? I have a stock MAF sensor that I believe is going bad, or it may even have already gone bad. I would like to test t prior to purchasing a new one. I have a 2011 GT500 that was running for months at an AFR of 11.8 at WOT and the AFR of 14.6 idle...
  10. M

    low rough idle AND hanging RPMs

    I feel as if I’m dealing with 3 issues here; possibly related, but I am running out of signs to use for trouble-shooting. The first problem is a low, rough idle that sounds as if my ’04 cobra has a pushrod motor with a loping cam. The second problem, while I originally thought was independent...
  11. AMChrisRose

    Ghost Cam Idle Tune - 2011 Mustang GT 5.0L 4V - Bama Custom Tuning Preview

    YouTube - Ghost Cam Idle Tune - 2011 Mustang GT 5.0L 4V - Bama Custom Tuning Preview Check out this preview of the new "Ghost Cams" custom tune from Bama Custom Tuning at AmericanMuscle.com. Want your 2011 Mustang GT to sound like it's got aftermarket cams? Simply give the Bama team a...

Top