Hey guys..
I've got a kit available for the 11-13 GT. It has dyno time, and about 10 track passes at 12psi. We used this back early last year when we were doing fitment on the 2015 GT with Kenne Bell. The parts are in like-new condition, with almost zero signs of usage. Here's what you...
I have a fresh '89 Notch roller that I've been hanging on to for a while.. It was never finished, and sits in my garage.
1989 Notch, never wrecked, straight body/panels, and no rust
Here's what's been done:
- Brand new flat black paint job (performed by DIB Customs in Houma, LA)...
I've got a brand new 4.2LC partial (tuner) kit for an 11-13 GT. You get the following:
- 4.2L liquid cooled/polished supercharger
- Mammoth inlet manifold (polished)
- Lower intake manifold/intercooler
- Polished 168mm billet oval throttle body
- 4.5" Black cold air inlet and filter
-...
Hey guys.. I've got a demo kit used for an article (dyno time and track time only) available that has about 100 miles of use total (dyno, street, and track testing). Some parts will come brand new (as indicated). It will fit any 11-13 GT, and comes with the following:
2.8L KB head unit...
Hey guys.. More 2015 GT parts. This one is a 130 mile 2015 that's getting a TH400. Trans is perfect, and 120 of those miles are from a dealer transfer. The other 10 are from me driving it to the shop. ;)
2015 MT-82 Trans (130 miles) with updated shifter bracket/linkages and shifter...
Hey guys.. I've got a new take-out powertrain setup from a 2015 Mustang GT. Car is brand new, and has exactly 472 miles. The entire powertrain is being pulled to install a sleeved/built long block and Magnum XL for a high HP project.
Here's what's included:
- 2015 435hp...
I've got a brand new/un-used Big Stuff 3 setup, with harness, intake manifold, EFI Spyder elbow, and accufab TB for a SBF.. I recently bought a project car and this came with it. It was never run or installed.
Comes with:
BS3 EFI unit
Complete (labeled) engine harness (plugs into any...
I've got a brand new TR6060 trans out of a 2012. It was never driven on. The car was transported to the shop via trailer from the dealer, and put on a rack for a full auto swap.
I also have the stock brand new clutch and flywheel that came out of the car. It, too is in new condition...
Hey guys.. I've got a complete supercharger/intercooler/lower setup from a 2002 truck. Parts have 72K miles on them, and the supercharger was ported/rebuilt 10k miles ago. The TB was hand ported as well.
I also have the bridge, a brand new Moto Blue idler with bracket, the factory balancer...
South of the border, doing some suspension tweaking.. :coolman:
https://www.youtube.com/watch?v=0E8FqD2bV5A
Car hazes drag radials at 80+mph..
E85, 20psi, Built 6 liter (big bore/stroker), 4.2LC Kenne Bell.
Having run low 10's in our full weight street car, we've decided to see what we can do in full out race trim.
We've got a JW built TH400, and 4000rpm stall, ready to go in. We'll get it in next week and measure for the driveshaft.
From there we'll be yanking the engine to get it ready...
We'll be heading to the drag strip on Friday with our supercharged 2015 GT. We're aiming for high 9's on a 28x10" slick @ 650whp.
Whoever can guess the quickest E.T. without breaking out will win a Boost Works short sleeve T-shirt, plus medium logo decal. :)
- Posts can be made up...
We'll be heading to the drag strip with our supercharged 2015 GT on Friday. Frank over at DSS was kind enough to send us a set of their 800whp axles to try out. We'll have them in on Thursday, and we'll let you know how they work out.
I know that American Muscle is running the same set in...
I know a lot of people tend to skip over the front page.. Steve put together a really nice article on the build-up of our 2015. Check it out if you haven't already!
http://www.svtperformance.com/?p=8644
Good stuff! Thanks for everything you do, Steve.
Supercharged 2015 Mustang Launch Testing: http://youtu.be/mY_D59sEWjE
No hop whatsoever.. This is with our prototype delrin bushings in the rear subframe, on nitto 555r's. Can't wait to get it out on the drag strip!
After 3 grueling weeks, the team at Boost Works is proud to announce that we have the world's first tuned, twin screw powered 2015 Mustang GT!
https://www.youtube.com/watch?v=kHu_U-lpipU&feature=youtu.be
The car laid down a very healthy 653whp/533wtq at 12.5psi, at 17 degrees and .80...
After 3 grueling weeks, the team at Boost Works is proud to announce that we have the world's first tuned, twin screw powered 2015 Mustang GT!
https://www.youtube.com/watch?v=kHu_U-lpipU&feature=youtu.be
The car laid down a very healthy 653whp/533wtq at 12.5psi, at 17 degrees and .80 Lambda...
We're grinding it out down here in Texas.. 2am, and still going strong! We're hoping to be on the dyno tomorrow. Just working out drive-ability and getting this massive throttle body dialed in (168mm big oval). So far, so good.
Our tuner nailed the tune on our big power GT500 last...
Worked with Race Star Industries to get the first set of S550 specific drag wheels. Mounted a set of 28x10 Hoosiers out back, and 26x6 MT Sportsmans up front. Love the look..
We have these in stock, and ready to go. Give us a call at 281-398-1850.
Ordered a spare set of axles for our Performance Package GT. We'll have these on hand just in case we break the original ones at the drag strip.
They are actually pretty damn beefy.
The spline count is 35 on the diff side, and 32 on the hub side. The joints look beefy, and there...
Took the car down to Beeville this past weekend. We had severe traction issues, but still managed multiple 165 to 170mph half mile passes. Unfortunately, we were out of gear and tire at about the 3/4 mile mark. (27" tire and 3.55 gear with a 7400rpm limiter). Right at 200mph, and coasted...
Just a quick video of a dyno hit at 20psi (low boost), on E85, 16 degrees, and .76 Lambda.
http://youtu.be/Yrx2k8ZLGbI
We're keeping it very conservative, as we're preparing to run the Texas Mile this weekend. It's got a lot left in it at 20psi. We'll switch to C16 next week and pulley...
Just a quick video.. Still have a few loose ends to tidy up, but we fired the car up for the first time. Waiting on 8 rib parts to show up, so please excuse the 6 rib belt on the 8 rib blower pulley. lol
https://www.youtube.com/watch?v=I01YeF4gIXU&feature=youtu.be
As soon as HP Tuners is...