canton oil pan for sale 13-780 has -10 turbo oil drain welded in. no dents was used for dyno time and about 300 street miles before removing.
asking $135 + shipping obo.
https://www.cantonracingproducts.com/product/13-780/13-780---FORD-46-STOCK-ELIMINATOR-REAR-SUMP-PAN/
im looking for a decent tire but not to expensive. i usually run michelin pilot sport a/s plus tires but they are like $225-250 per tire my cost! ive ran them for years but im really looking to spend less.
i was thinking about the sumitomo hrt z2 or the bf goodrich super sports.
what are...
I'm not the seller but damn if these are not like a diamond in the rough.
http://www.ebay.com/itm/Ford-Mustang-Cobra-1999-2004-OEM-Ford-Accessories-Front-End-Cover-Bra-/281805410236?hash=item419ce94fbc&vxp=mtr#viTabs_0
just wondering how many guys got a steal on a new/used terminator. I know I stole mine.
I was digging through some old papers in my garage and ran across my bill of sale for my 03 cobra.
it was 11-23-2009 I paid $16,404 + tax with 20,474 miles on my car.
today the car has 32,579 miles.
I...
so I like the look of the newer mustangs and I saw a while back that American muscle was offering the led newer style tail lamps for 99-04 mustangs.
just wanted your guys opinions on the look...
http://www.americanmuscle.com/raxiom-icon-led-taillights.html
so im just wondering how many of you guys are running a quick time scatter shield. ive given up on mine and put the stock bell housing back on mine.
it was a tight fit with the turbo stuff (but it fit). but the biggest problem I had was starter not aligning up properly. I was told you have...
so Ive never seen this topic before but im sure its been thought about many times. why in the world has no one made an aftermarket FRPS!
between all the big names, someone SHOULD have made one by now.... but has not. there has to be a reason.
anyone got that answer?
arp say 70lbs torque and also use blue Loctite and their fastener lube.
I do not have their fastener lube. can I substitute it?
http://arpinstructions.com/instructions/254-2901.pdf
ive been in deep hiding so to say. after several misbuilt motors and such took a toll on my mentally and financially also I had not been in the mood to even talk about my car much. but after a nice long vacation in myrtle beach and hearing all those mustangs kinda lit a small fire under my ass...
I just paid for my condo for all week long like usual. staying Monday-sunday.
I hope to have my cobra ready this year.....
now I have to buy another trailer to haul it.
who's going this year?
so ive searched google, svtp, mod fords, ect....
i can not find really any good references on how to install custom cams in a 4.6l 4v. i am aware of the special tools needed, its the how-to part that im not finding any luck with.
id love to see detailed pictures and a great write up on...
I already have this kit and im rebuilding my motor. but I read somewhere that the hex a just has an issue and have broken apart....?
fact/fiction?
just need some good advise because everything is apart currently.
I also have the tfs lower timing gear.
car is 283ci motor with 76mm...
ive got a set of stock 03 cobra cams and gears along with the timing chains and tensioners. they came out of a motor I had with 48k miles on it.
what do you think they are worth?
I thought about selling them because I don't need them just have no idea what to ask for this components.
im going back to a mechanical pump i believe. i have a meizer but ive had a few people tell me to get a mechanical one.
what pump are you guys running and why?
thanks
car is a single 76mm turbo with a built motor.
for sale:
meizer electric water pump $325 shipped. has 15 dyno passes and about 250 street miles. (comes with all wiring and instructions)
new these are $420
msd 2-step launch control p/n 8734 $165 shipped. has 15 dyno passes and 250 street miles. (comes with all wiring and instructions)...
I got my custom pistons from diamond. But this has to be a typo...
.0065 wall clearance???
my last set of diamond pistons were .0035
my cp's were .0045
they do have the double diamond coating if that makes a difference. but ive been told thats only like .002 difference.
so our oil coolers have been discontinued. my motor had a bottom end failure. there was trash in my oil from the bottom end failure. it damaged my pump and also damaged my turbo bearings.
so my question is should i take apart the oil cooler and clean it an reseal it or say fuk it and trash...
im selling these springs and retainers because I needed more seat pressure for very high boost.
they have 100 miles on them and are in like new condition.
new they sell this crower kit 87410 for $752
the retainers are part# 87026T
the springs are part#68194-32
these springs do not...
so I called comp because I felt I had some valve train issues.
long story short I believe I had some valve control issues. I have ferrea competition plus intake and exhaust valves f1450p & f1451p. the springs were only about 80 on the seat and 225 open @ 1.430 install height. the springs...
I have a set of stock manley h-beam rods have 52k on them. also have a brand new set of arp2000 rod bolts.
asking $575 shipped with pay pal fee's.
selling because im building a motor with billet rods.
looking at getting a set of 4340 billet rods from them.... opinions?
http://www.ebay.com/itm/K1-RODS-BILLET-H-BEAM-FORD-4-6L-5-933-FH5933AMGB8-/290543798755?pt=Race_Car_Parts&vxp=mtr&hash=item43a5c289e3
http://www.summitracing.com/ga/parts/kot-011an17593/overview/...
so after several failures do you poor builder choice and other factors that were outside of my control...... ive finally decided to build another motor and should be done soon. ill have to get pictures when I get the parts but yea im excited.
so this new build consist of:
97 cobra teksid...
im trying to keep this last build budget minded.
I have a set of stock manley h beam rods with new arp 2000 hardware.
will they hold safely 800-1000 rwhp.
I ask because this is what the motor made before on the street/race tune.
I really do not want to buy billet rods unless I...
I pulled my rods out and plan to install arp 2000 bolts and new bearings. question is I forgot to mark the caps from which way they came off. did I just do a major no no or what?
I still have to get the block machined and all. just need some advise
thanks
I forgot to mark prior to...