Search results

SOLD!!!I have decided to go auto so it's time to sell the XL….I spent $3500.00 and had it completely rebuilt and face plated this year by Liberty Gears in Mi….they warned me that I would be pushing the envelope at 1200+ but I went ahead and had them do the work anyway. Long story short is the...

The weakest link in the Magnum XL upgrade kit is the transmission mount, it's a made in China piece designed for a V-6 Ford Explorer that retails for about $10.00. I discovered mine was cracked during a pre race inspection and was able to find a nice replacement made by Energy Suspension…..part...

Selling the Manley H-Beam rods and Mahle pistons out of a Ford Racing 5.4 shortblock. The pistons have not been used and come with rings, pins, and retainers. These are the newer CJ pistons that give a final compression ratio on stock heads of 8.5.......the rods have 700 miles and about 30...

SOLD!!!!…….This is a nice upgrade for anybody running a '07-'12 inter cooler regardless of which blower you have. It's in excellent condition......The cooler has about 800 miles and 25 passes on it....my car is mainly a track car and has a PVC delete set up on it so NO oil has ever been...

We hit the dyno yesterday at PSI in Hillsboro……big thanks to Van, Jon Lund, Max at Aldridge Motorsports and Jason at PSI. The car ended up putting down 1139 RWHP and 972 RWTQ…….we stopped the pulls at 6500 with the HP still climbing. We made these numbers on $4.00 a gallon pump E-85!!! It is...

Most of you know I discovered a cracked lower pulley and damaged crank after completing my winter upgrades to E-85 and 3.4 Whipple. I was at a crossroads and not sure which way I wanted to go with the motor. One phone call from Van changed everything and made my decision very easy……he came up...

I ended up ordering L&M 9.5 to 1 pistons and boring the FRPP block .020 over after discovering some windows in the cylinder walls with the torque plates bolted down. The pistons are brand new and come with wrist pins, rings, and retainers. These are the newer CJ pistons that JDM helped...

High Capacity oil pan will fit '07-'14 GT 500's new in box.......$200.00 shipped.SOLD!!!!!! KB 1/2" Engine Lowering Mounts (came with my 4.2 kit) $100.00 shipped.SOLD!!!! Both are in perfect condition and original packaging.

Found out the hard way this should be part of our yearly maintenance if you are running high boost levels and aftermarket lowers. This is not a negative thread against ATI.....they make excellent race proven lowers and I have already ordered another 10% lower for my new motor build along with an...

Moving up to a 4.2 Kenne Bell and built motor thanks to Van at Revan Racing and Jim Bell. My car is now officially sponsored so the Whipple has gotta go. I purchased this low miles clean blower from a forum member about 3 months ago. The CAI is brand new from JDM and in excellent condition. I'm...

Converted to E-85 so time to sell my AIS kit. This set up has worked perfect for 5 years and has their upgraded 200psi pump I purchased last year. Install is super easy and I can help the buyer with any questions. Price is SOLD!! including shipping and paypal fees. SOLD!!!! Kit includes: 1.5...

My '13 TVS is back up for sale. I sold it to forum member who pmed me after receiving it and said it was leaking oil from the nose. I figured the box was on its side during shipping as I had not had any problems with oil leaking. To be safe I refunded the money and had the blower shipped to Bob...

2000 miles on this JLT Super Big Air CAI finished in black snake skin hydro dip. This is a later version with the built in screen in the filter. There are some scratches in the lower corner of the shroud that rests against the engine bay. They are not visible once the shroud is installed. The...

2000 miles on these like new, plug and play 72lb. injectors.....they are a direct replacement with no adapters needed.....these are $649 new....selling for $275 shipped...great option for recent TVS upgrade. The injector on the lower right is stock.SOLD!!!! Uploaded with ImageShack.us

8000 miles on this 17 volt Street version BAP.....no controller I just soldered the ends together....super easy install, remove the plastic trunk panel, open up the wiring harness on the lower left side of the trunk.....red wire in the harness to red on the BAP in and out.....white wire in the...

'13 TVS painted black, 5.8 removed, 2.4 BPS pulley, stage 6 Steigiemeier port, high flow welded and D port matched '07 elbow, Division X fuel rail kit,72lb. injectors and JLT Super Big Air intake hydro dipped in black snakeskin. Intake has a blem in the snakeskin on the under side that does not...

I have a new set (4) of Ford GT cams $500.00 shipped.

I have replaced my 6060 with a T56 Magnum XL. The Tremec 6060 will need to be rebuilt.....nothing major but I was having trouble power shifting when I replaced it. The street manners where perfect. This would be an excellent combo to send to D&D, Liberty, etc. etc. for a rebuild. The price...

I have replaced my 6060 with a T56 Magnum XL. The Tremec 6060 will need to be rebuilt.....nothing major but I was having trouble power shifting when I replaced it. The street manners where perfect. This would be an excellent combo to send to D&D, Liberty, etc. etc. for a rebuild. The price...

I was having issues with my TR6060 not wanting to shift into third cleanly and feeling "crunchy" in all gears while speed shifting. I have not experienced the 1-2 grind or lockout others have complained about while speed shifting......this was simply an excellent tranny giving in to seven years...

Just wanted to give props to Van for taking my call on a weekend (2 weeks ago) and taking the time to talk some sense into me instead of just taking my money. I had been having some issues with belt slip and my methanol set up and was ready to start over and spend a bunch of money on some new...

Finally sorted out my belt slip and methanol issues. Car laid down 709RWHP and 739RWTQ on 92 octane. I am running a Billet Pro Shops 2.39 upper and 15% lower making 19.4psi. Everything looked good......A/F in the 11.0 range, duty cycles at 40% and timing in at 23 degrees. This should be enough...

Just finished up the Winter projects in time for our first Super Shifter race on Sunday. Full cage turned out killer, we ran it thru the dash and super tight to the headliner and windshield. I had all of the carbon fiber peices changed to snake skin to match the cage. Speed of Sound designed a...

I have switched to a 15% lower. The pulley cleaned up nice but in the spirit of full disclosure it does have a small nick in one of the ribs....didn't know it was there until I was cleaning it up. The price reflects the nick....it shows up clearly in the photo. Price is $350.00 shipped...

BIG surprise today when I pulled the '13 TVS. I have had belt slip issues with the new 2.4 pulley I installed at the end of last season. Granted I drive my car harder and more often than most with all the drag racing I do but I was shocked at how black the IC was. This is the 6th time I have had...