Search results

  1. carrew

    Full Tilt Boogie Control arms Upper/lower built $700 never used

    I have them on ebay as well with some other Terminator suspension parts Shipping FYI lowers are 25lb each and uppers are 12 lbs so about 75 lbs total. plus oversize box. I built to use these on a Fox project, but didnt get complete (321829194909) (321829195826)
  2. carrew

    18" BBS RK's with BFG KDW2's Pefect fit for a 5 lug fox $1,400.00

    Picture link added in post below 4 BBS RK's original Silver finish 18 x 8.5 with BBS carbon fiber center caps and Air fill caps Front - 245 / 40 /18 BF Goodrich KDW2 with 3/4 tread and only 3K miles Rear - 275 / 35 /18 BF Goodrich KDW2 with 3/4 tread and only 3K miles and no burn outs Will...
  3. carrew

    18" BBS RK's Silver with BFG KDW2's $1,400

    Picture Link added Today, See link in post below but they are the same ones in my signature 4 BBS RK's original Silver finish 18 x 8.5 with BBS carbon fiber center caps and Air fill caps Front - 245 / 40 /18 BF Goodrich KDW2 with 3/4 tread and only 3K miles Rear - 275 / 35 /18 BF Goodrich...
  4. carrew

    F/S: $800 IRS upper/lower arms w/ full tilt boogie installed plus free bushing kit

    Contact PM or Email cc027999-1911cg at yahoo dot com Plus I will throw in a new set of Full Tilt Boogie Subframe Bushing kit ($120) for Free http://i1266.photobucket.com/albums/jj534/chris_carrew/ftbrsubframe2_zps6dc63588.jpg 03/04 Cobra IRS upper Control arms with Full Tilt Boogie...
  5. carrew

    For Sale: $800 IRS upper/Lower arms w/ Full tilt bushings installed plus free kit

    Contact PM or Email cc027999-1911cg at yahoo dot com Plus I will throw in a new set of Full Tilt Boogie Subframe Bushing kit ($120) for Free http://i1266.photobucket.com/albums/jj534/chris_carrew/ftbrsubframe2_zps6dc63588.jpg 03/04 Cobra IRS upper Control arms with Full Tilt Boogie...
  6. carrew

    Vortech Power Cooler kit $500 (intercooler)

    sold
  7. carrew

    MM torque arm, HD LCA's, 5 lug spindles, adj rear swaybar

    Name: Chris Contact: PM here Location: Indianapolis Prices do not include shipping and handling fees 79-98 Mustang / Cobra Maximum Motorsports Torque Arm used have new install kit $350 (New $499) http://i1266.photobucket.com/albums/jj534/chris_carrew/taagain_zpsc565734a.jpg 79-98...
  8. carrew

    Cobra parts- MM, FTBR, H&R, Bilstien, Kenny Brow

    Name: Chris Location: Indianapolis Contact: via pm Prices do not include shipping and handeling Erased sold items 03/04 Cobra IRS rear swaybar with eurathane bushings $75 http://i1266.photobucket.com/albums/jj534/chris_carrew/bushedsway1_zpsf377839b.jpg 03/04 Cobra IRS Maximum Motorsport...
  9. carrew

    90mm Maf, oil adapter, eaton spacer, GT500 IC

    Name: Chris Contact: via pm location: indianapolis Prices do not include shipping and handeling 03/04 Cobra Intercooler upgrade or eaton swap "GT500 with brackets", been pressure checked and cleaned by radiator shop $150...
  10. carrew

    Cobra IRS parts: MM, FTBR, Bilstien, H&R

    Contact me via PM Location: Indianapolis Prices do not include shipping and handeling fees Large items might require pick up or Freight Shipping on a skid Price see near each item 03/04 Cobra IRS rear swaybar with eurathane bushings $75...
  11. carrew

    1989 Mustang GT 74K miles, BBS RK’s, Vortech $11,500

    I am pulling it off the market, I found a few things when I was out cleaning it this week that I want to fix first before selling.
  12. carrew

    Well picked up the next piece of the puzzle for the fox (IRS)

    I drove to Pittsburg and brought home a 04 Cobra IRS complete. Since I am selling my 01 cobra and it has the full tilt boogie parts complete bushing kit. I am going to take the 04 Diff/pumpkin, 04 axles, my FTB control arms, subframe, swaybar and links, and tierods for the fox. Put all the...
  13. carrew

    Complete eaton swap with goursh brackets

    Complete eaton swap with goursh brackets PICS SOLD I have been putting together an eaton swap for about 2 years and I acquired every part needed to swap an eaton onto a N/A mod motor. I have even already machined the lower intake for the lightning IAC sensor and have the sensor and recently...
  14. carrew

    Photo gallery goes to a white page and in quick links it says no access

    So is the photo albums under repair or what?
  15. carrew

    SVT owners worst nightmare might be true

    God loves LS1's A tornado destroyed the whole garage and a LS1 trans am on a two post lift survives how is this possible.
  16. carrew

    03/04 Cobra Hood $550 OBO

    SOLD Thanks Brandon
  17. carrew

    I was on ebay and saw heck of a deal on a PMS

    I have custom tune, but these are normally about a grand. to see it for this cheap is a wow factor. Not my ad nor do I know this person. I just figured someone here could use it. eBay - New & used electronics, cars, apparel, collectibles, sporting goods & more at low prices
  18. carrew

    MM IRS Diff mount, Cobra R Springs, Termy Springs, H&R

    I have the poly MM diff mount with the bushing already installed in the factory rear diff mount. Plus the MM front diff bushings. MM sells the bushing kit for $60. I will sell it for $80 shipped. Saves you the time to remove and install the bushing. Rear Cobra R springs - $110 shipped...
  19. carrew

    WTB: H&R Rear Springs only (IRS)

    Anybody go SRA and looking to sell their IRS H&R Race. I have the fronts already, just looking for the rears.
  20. carrew

    Eaton Swap Peeps what is your boost and what pulley sizes

    Been reading that it seems since our heads are more restrictive people are seeing 2lbs more then a termy with the same pulley sizes. I was going to run a stock upper and a metco +2 lower, but I am afraid it will equal 12lbs and that is way more then I wanted. Just wanted to see what people...
  21. carrew

    Post your SVT number with year, make, etc (Sticky would be cool)

    2001 SVT Cobra #992 of 3867 Build Date: 05/16/2001 Color: White Interior: black dash and brown parchment seats Wheels: Silver Painted 17x8 Current mods: Wheels: FRPP Silver 10th Anniversarys 275/40/17 and 315/35/17 Engine: Doing a Eaton Swap Trans: TR3650 with a Centerforce Dual Force...
  22. carrew

    KenneBell BAP $150 shipped, used in terminator

    Bought this used and was going to use it in my Eaton swap with a SVT focus pump. I went with a different pump and since my boost level is low it is not needed. It is the one that is triggered by boost, not with dial. Comes with instructions how to hook up also. Will post pics later, but it...
  23. carrew

    2001 Intake forsale $250

    I have a 01 cobra and I am doing a eaton swap and I have my intake for sale. I will take $250 Located in indianapolis I will post a picture tomorrow
  24. carrew

    FRPP Cobra R Brembo Brake front $1000 obo

    For Sale: FRPP Brembo Calipers, Rotors, and brake lines $1000 obo 79-04 (79-93 with a SN95 swap) I picked this up last spring and it has been sitting on the shelf, I was going to use them on the fox, but I like my wheel combo on it too much. I am probably going to kick myself for selling them...
  25. carrew

    Reichard Racing Eaton M112 Spacer $150

    I have Reichard Racing Eaton M112 Spacer with the intercooler adapters for $150 Shipped. I don't have the fasteners, but you can purchase the bolts at a hardware store they are just longer then factory. It is good condition, it was used for about 20k miles.

Top