Search results

Pics added

It posted without them and will not let me edit or delete it. There is another ad with pics

Here is my Beautiful JWC PERFORMANCE BILLET UPPER which retails for 2395.00. To have the lower modified is 300.00 through JWC as well to have the intercooler modified for larger AN fitting plus kit retails for over 200.00. All work was completed by JWC and ready to bolt on with no lead time to...

2000 Cobra R heads Brand New. I have over 3,700.00 into the heads, just in parts and labor. Not including the actual cost of the head. Also will come with all of the lash adj and all. Which are also new. All of the hard and expensive work has been completed to them. You will not find a better...

Pm sent

2011 Coyote Short Block for sale. I have had it for a while and never did anything with it. Actually purchased it from another member on here. Looking for local pickup. Located in Hagerstown MD. 1100.00 OBO takes it.

Used bosch 105lb injectors. Used for 2 seasons with minimum miles and mostly track use. Asking 500.00 obo shipped. Fore rails black in color. Some scratches from where the braided lines rubbed under the whipple. Asking 200.00 obo shipped. Pics upon request.

I have a set of brand new 16 intake and 16 exhaust valve springs for sale. Also will come with new retainers and keepers. They are the gt500 set from ford racing. I will let them go for 175.00 shipped. Pics upon request.

MMR sheet metal intake for 5.4 with gt, cobra r, and gt500 heads. It has the dual injector option with the rails to match. This is a very nice piece for the money and cannot touch it for this price new. I changed my build plans so it needs to go. 1700.00 with the 105mm accufab throttle body or...

3.4 whipple with crusher inlet for sale. Case and rotors were replaced and upgraded feb of 2014 due to rotor pin failure. So it has been upgraded to the latest generation. I did notice some marks on the rotors when i romoved it yesterday but never had any issues and would see 25lbs on 3.5"...

Been searching for info without any luck. Anyone know about how much lift/duration you can run with flat tops (no valve reliefs)? Looking at getting custom grinds since i will be converting to a single turbo, want to get as much as possible out of it. The bottom end is out, so if need to have...

I have a set of 00' cobra r heads that are new... was wondering if anyone knows what valve seats are installed from Ford? Are they powdered metal or some sort of hardened type? Looks like the intakes and the exhaust are different material. Any help would be great. Thanks in advance.

Vid of my 03 cobra swap pass @ MIR hangin the wheels New vid of my car at MIR the other day. Stock 03 cobra motor with 3.4 whipple crusher on E85. <iframe width="420" height="315" src="//www.youtube.com/embed/gkKlXumPLIU" frameborder="0" allowfullscreen></iframe>...

Well I made it to the track this past Saturday and got my new personal best. It went a 9.59@142, and I was surprised with the 1.32 60' foot braking the car. But long story short, showed up at the track and my transbrake would not work... Just my luck lol. But I am overall happy with the car and...

2003 Complete 4.6 2v engine for sale Stock Comes with everything from throttle body to oil pan. 750 obo takes it. Located in Hagerstown Md, i will not ship it.

26,xxx mile deep violet GT roller for sale Mods: QA1 tubular K-Member Lakewood 90/10 struts UPR 150lb coil overs Caster/Camber plates Team Z uppers Team Z lowers Team Z anti roll bar Team Z solid Bushings Stock GT springs Sub Frame connectors Driveshaft Loop 6pt chromoly roll...

2011 Coyote block for sale. Taken out of a wrecked 2011 GT with aprox 28,xxx miles on it. I was going to use it for a build but going a different route now. There is still cross hatching in all of the cylinders. A few have some wear marks on them but you cannot feel them and can be honed out...

My first full pass in the car. It was running 6.19 1/8mile most of the day with 1.38 60ft. So of course when it pulled the 1.36 60ft I got excited and shifted from 1st to 3rd lol. So the car has a little bit left in it and im happy with my results. Stock 03 cobra motor 3.4 whipple crusher...

I did a search but could not find anything on my issue. Ok, at high RPMs my tach drops to 0 and my Odometer goes to all dashes (no Numbers). It has thrown a code for what i think is Crankshaft Position Sensor no signal but I forgot what the code is, so i will have to post it later today when...

As the title states 03 cobra part out. The car has around 42,xxx miles. After market parts might have 3000 miles at the most. I am getting out of racing so everything is going. I will post pics and update as this goes along. What I have listed is whats up for sale now. NO TRADES...

Dyno pull and some playing around. 72obuJjIaW8 Oi96ITl77LM

97 DEEP VIOLET GT 27,000 ORIGINAL MILES 03 COBRA SWAP 40,000 MILES MOD LIST: 3.4 WHIPPLE CRUSHER KIT 105LB BOSCH INJECTORS FORE FUEL RAILS DUAL BOSCH PUMPS ALL 10AN FEED 6AN RETURN AEROMOTIVE FPR GLENNS SLEEPER TANK SCT X3 HAND HELD MAC LONGTUBES BASSANI X PIPE BASSANI...

BILLET FLOW upper hub and 2.93 ring never used. It is black in color. 135.00 shipped I will post pics later tonight after 9.

I have a Metco lower ring for sale. It is a 6.55" underdrive for lowering your boost. Most cases you will use this when you need to drop your boost because you are running a large KB or whipple. This will fit only the Metco lower hub assembly. 75.00 shipped I will post the pics later...

I have a metco interchangeable lower and idler relocation setup that comes with everything just like it does from Metco. It has a 6# ring that is included. Part#ICPCOBRA1 350.00 Shipped I will post the pics later tonight after 9.