Search results

Gents, I am selling a lower intake manifold that has been worked over by the one and only nasvt. The intake has been powder coated wrinkle black as well. This is NOT a short runner intake manifold. This is an awesome intake mani for any boosted street car because it truly helps uncork the...

Selling a Mach 1 throttle body that I bought new about a year and half ago after my BBK TB started getting crappy on me. The TB has around 2,000 miles on it and is in great condition. $45 shipped

Selling a WOT box that I bought back in July. I partially wired it into my car and then made the decision to part my car out. With that being said some of the wires have been lengthened, but otherwise this thing is brand new. $100 shipped

ID1000 injectors. Sent them into Injector Dynamics to have them cleaned and flow tested for the next owner. Ready to make some power: $650 shipped

I have had the part-out thread going on for a few weeks now in the parts section of the Market. Well, I finally had some time and a few helping hands to roll the car out for pictures. For those of you who would like to see the part out thread or simply would like to see the kind of parts...

I absolutely never thought this day would come and it breaks my heart to see it happen, but I am parting out my 1997 turbo cobra. Due to some unforeseen drastic life changes I have been left with no choice but to get rid of the car. I have been working on this thing for about 6 years and this...

Hello, Selling a used balanced rotating assembly that is coming out of .20 over Teksid aluminum 4.6L cobra block. Here are the specs on the assembly: -8 bolt forged cobra crank (I'm not sure on the exact mileage) -Eagle Forged H-beam rods -Ross Forged pistons The setup has about...

Hey guys Im looking for a 96-04 stock forged 8-bolt cobra crank. I'd rather pick one up locally versus having somebody ship that huge hunk of steel. Trying to pick one up this week and drop it off at the machine shop before I head out of town next month for 5 weeks. Many thanks...

Looking for a forged 8-bolt crankshaft that came out of the 96-04 cobras or the manual trans mach 1s. Let me know what you have! Thank you, Garrett

Selling my Livernois drop-in valve springs. These were in my cobra for about 20,000 miles. I removed them because the heads were removed and rebuilt. Due to the fact it is a moderately boosted turbo car we went with a new set. Would make a great set of springs for a NA build. $110...

I am in the process of pulling the engine out of the cobra. I have been using the vacuum line coming off of this purge flow sensor for my boost gauge for years and honestly forgot about it. From what I understand the sensor is for the evap system for emissions purposes. I have deleted...

Recently I re-did my cooling system. I did the MMR coolant crossover delete and am currently running the thermostat in the upper hose . Now with the MMR coolant crossover delete and especially the on3 performance delete with thermostat in the upper hose I feel like there are more coolant...

So yesterday I burped and bled my coolant system after doing some work on the car. Everything turned out great and I drove the car later that night to a town about an hour away. Car ran great, however on my way back I started to notice a sound. Eventually I couldn't help but pay attention to...

So I am in the process of making an oil cooler kit for my car and want to finish off the upper half of the coolant system by doing all AN parts up top. Simultaneously while doing this I figured it is a great time to replace the stock expansion tank with a smaller aluminum expansion tank to give...

Yesterday I had a conversation with a good friend of mine who recently had his motor built (forged internals, etc..) and he informed me that the builder advised him to now run 15W-50 oil. Now this is not the first time I have heard this. In fact it seems quite frequent that a lot of turbo...

Does anybody know what NPT size the coolant temp sensors are for our cars in the coolant crossover? I looks like 1/2" NPT but I just want to be sure before I order a bung.

So a while back in this end of the forum I made a request for a recommended exhaust/fabrication shop to do some work to my car. There weren't any recommendations so I did some searching. After perusing the net I found a place up in Birmingham, AL that seemed to fit the bill, Morgan Performance...

Previously I built my fuel system using all Earl's hose with Fragola series 8000 push fittings. I never had any leaks and everything performed well. In light of me wanting side exhaust I decided to move my return line from my driver side over to my passenger side this past weekend just as a...

Hey guys I'm in the process of re-doing my exhaust and throwing around a variety of ideas. My 97 is turbo'd and right now I just have a 4" DP into a muffler that is dumped before the rear axle, it is driving me crazy (how loud it is at all times) and have thrown around the idea of side exhaust...

A few months ago I moved from Maryland to Alabama and don't know the area or the surrounding shops very well. I am having a difficult time finding an exhaust shop that is willing to do an exhaust setup that will go over my MM 3-link suspension. Enterprise, AL is just about as far from...

A few months ago I moved from Maryland to Alabama and don't know the area or the surrounding shops very well. I am having a difficult time finding an exhaust shop that is willing to do an exhaust setup that will go over my MM 3-link suspension. If anybody knows of an exhaust shop that...

I have a MM oil filter relocation kit on my car and have always used the recommended Motorcraft FL1-HP filter with it. MM seems to swear by it. With that being said I am curious to know if anybody else has had success with other high performance oil filters that can be bought at the local...

Hey fellas, I just bought a "brand new" Mach 1 throttle body off of a reputable vendor on eBay. Everything looks great except for the back of the throttle blades. The blades have a black coating which looks to me like carbon buildup. I contacted the seller and he claims that the black stuff...

I am selling a brand new set of custom adapters that I ordered for my mustang but never wound up using. The adapters took a while to be made and I needed them by a certain date so I bought another set from American Muscle that work fine on my car. Now I have two sets of adapters and I rather...

Selling my FRPP Y2K cobra R wheels 18x9.5. This is for the wheels only, no tires included. They are a great set of wheels with lots of life left however they did come off of a daily driver so they are not perfect and I think the price reflects that and is fair. The good: -the chrome on...