If anyone is interested, I'm selling my 03 Cobra. Check the Market for details
http://www.svtperformance.com/forums/terminators-buy-sell-254/970086-fs-2003-redfire-vert.html
Located in Las Vegas, Nevada
$18,000 O.B.O
70000 miles
Never pullied
Magnaflow cat back
MGW shifter
K&N FIPK
Brembo slotted/drilled rotors
Factory chrome wheels
CDC light bar
Stainless steel bumper inserts
Clifford alarm with proximity and paging
Passenger Head replaced in Nov 2011...
My TOB exploded. The car is at the dealer and apparently you cannot get the bearing retainer sleeve without buying the piece of cast that goes between the bell housing and the trans.
Can anyone tell me if the LP sleeve is all that I need to get back on the road? Clutch, flywheel are being...
Can anyone pull up Ford service records? I had work done on my car for the "tick" and they replaced my passenger side head. I want to know what part number the replacement head was. I know the part number should be 2C5Z-6049-BAB/CAB. Reason being, I had plug number 7 back out of the head but...
I was getting on the freeway and all of a sudden the car falls on it's face and starts sputtering and won't do anything but idle. I pulled over on the on ramp and opened the hood and the motor is displaying symptoms of a misfire. I backed it up the on ramp and babied it home. I check the FRPS...
I just came across the muffler section of a Stinger cat bat. I currently have the Magnaflow cat back on the car.
Will the Stinger portion mount up to the Magnaflow or will I need to do some fabrication?
Has anyone else done this?
Can anyone tell me what these parts are?
FMC 3L5Z 3A697 AA Reservoir Asy
SPO F85Z 6570 BA Indicator Asy - Oil
N620482 S2
W703972 S900
These are listed on the repair paperwork for the head replacments on my wifes car and they don't sound like normal parts needed for the job that was...
...at the dealer. They are replacing both heads on the wifes stock 03 vert.
How long should it take and what kind of mess will I be looking at when they get the car back together? I'm guessing broken wire connectors and vacuum lines connected wrong. I did take numerous photos before I...
Anyone have one fail? I have a strange noise when the car is cold that sounds like a belt slipping or a frozen pulley. When the car is up to operating temp, it's quiet as can be. Tonight I replaced my belt with a new gatorback in hopes that it was a glazed belt but when I spun the tensioner...
Lately it's been down in the mid 30's here at night and in the morning when I start up my car, it sounds like the motor is going to take off like a jet. RPM's are normal, no piston slap, just a real hard noise to describe. I don't think it's the blower, pulley bearings or belts. Does anyone...
I have what sounds like a rattle but I only hear it when going 60-80mph depending on the wind direction and speed. If I slow down, it goes away if I speed up, it's get louder. I think it has to be related to the wind coming across the windshield but I've yet to find the cause. Has anyone else...
Well, 22600 miles on the car and the TOB is chirping again. Anyone know how I can get it to fail sooner rather than later? I had a new one put in at 8000 and again at 16000 miles but they just keep failing. I figure if I can grind this one up, I can get a new tranny or at the least a new...
How long should it take for the above average do-it-your selfer to istall one? Mine is on the big brown truck heading to it's new home and I'd like to install it before I head out cruising tonight.
Anyone added one yet? I'm going to dyno on the 15th and I want it checked but they don't have the tail-pipe sniffer. How much should I spend and is it worth it?
Lately I've been hearing a click from the left front end of the car when I pull into a parking spot and stop with the wheels turned a bit. Has anyone else had this and found the source. So far I have not been able to isolate it.
Thanks
Okay, here goes...
I have 2 03 Cobras and I'm a little concerned. My coupe has just over 18k on it and I've had 2 T/O bearings replaced each at about 8K. My cluth pedel seems to travel about 12 inches (full) and the cluth grabs around 3/4 of the way to/from the floor. My vert, less than...
Well, we did it...
Bought the last 03 at our local dealer last night. It's a RedFire vert with parchment top and seats. Pictures to come. It was dark when we finally got home last night. Maggies should be here early next week. Now I don't have to pray the wife leaves mine home everyday...
Anyone out there still waiting on theirs? I bought the car new in 11 of 2002 and still have not got the certificate. I got all the other stuff like the Ford Racing package and the book.