Search results

  1. 2001asp

    2004 Terminator FOR SALE

    SOLD I have my Screaming Yellow Terminator up for sale. I live in Pensacola, Florida and this Cobra is listed on Craigslist. Mod-list below. Please use thread to navigate to Craigslist. PLEASE, NO LOWBALLERS. Car is priced to sell fast. 7 Pictures viewing. TITLE IN HAND FOR 30 DAYS...
  2. 2001asp

    ProMotion 650 Clutch and Input shaft Installed

    Just finished installing my 1st clutch in my Cobra. I went with Promotion as they offered SOLID CUSTOMER SUPPORT; Which I knew I was going to need. I worked with Wolly and he put together a package deal as I was buying a bunch of parts all at once. I purchased the following: 26 spline 650...
  3. 2001asp

    Battery or alternator ???????

    Hey guys, I was driving down the road and my cobra would not go onto boost. If I tried to push the throttle from any gear it would just want to stall. So I pulled over, kept the car running, and look under the hood thinking I may have l may have killed a belt. Belt was fine, so then I turned...
  4. 2001asp

    Just had my car dyno'ed bolt-on+2.76.

    Car made 479.6RWHP on a Dyno Dynamic's Dyno. Torque looks to be a little over 480-485RWTQ. Mods are JLTrai, Pypes catted X with Metalic 300 cell cats, Borla Stinger, 170 T-stat, 2.76 Billetflow pulley and Idlers, new fluids and plugs one heat range cooler and gapped down to .32. I'm pretty...
  5. 2001asp

    About to pull the trigger. A little help....

    I have read so much about both of these pulleys. Billetflow 2.76 pulley w/ billetflow idlers, or Metco 2.90 pulley with billetflow idlers. I have read and watched so many videos. I want to get a final consensus on this one. My car is a street car, won't see any track duty, just busting...
  6. 2001asp

    F/S NIB 2.90 METCO Pulley/hub and 100mm idler

    I have an uninstalled New In the Box Metco 2.90 Pulley and a 100mm idler pulley for sale. I was going to go this route, but I will be going with a different setup. PAYPAL works for me. Both of these are still in there boxes and the idler is still in its new plastic bag. When I say new I mean...
  7. 2001asp

    Considering a lower ONLY Pulley set-up

    So when you weigh the cost of adding all the idlers and an upper pulley it seems like it would cost more, the same or close to just getting a lower. So my question is simple. How big should I go to match what a 2.80 or 2.76 pulley would produce? I understand I would need an alt pulley. So...
  8. 2001asp

    Do I been an AUX idler for a 2.90 metco?

    Hey guys I have a 2.90 Metco pulley nib. I plan on installing this very soon. Will I need an AUX Idler, or will I be ok without it? I also have a 100mm idler pulley that I can install. So do I need a new belt? Or will the stocker be ok? Car has jlt ria, pypes x-pipe w/ metallic cats, Borla...
  9. 2001asp

    VIBRATING/SHAKING above 100MPH

    Hey guys, I am new to the Terminator model. Had an 01Cobra for some time. Is it normal for the car to shake/vibrate at above 100MPH. I had the car up to 145MPH last week and it was shaking during deceleration. Was not sure if it was driveline or tire out of balance. Chime in if you can...
  10. 2001asp

    If you did it all over again,,,WHAT MOD WOULD YOU HAVE SKIPPED???

    As the title says. I just purchased a 2004 Screaming Yellow Cobra recently with intake exhaust and tune 421HP. Could you tell me about your worst mod experience and what you would skip the next time. Past car was a 2001 Cobra and I would have skipped the stiff coil-overs for the street and...
  11. 2001asp

    For sale: 2001 mustang cobra $11,500 silver 78k

    SOLD!!!!!!!!!!!!!!!$11,500 SOLD!!!!!!!!!!!!!!!$11,500 SOLD!!!!!!!!!!!!!!!$11,500 Thankyou Matt As it says, I am selling my 2001 Mustang Cobra. It currently has 78K miles. All mods are included of course. I am a responsible 34 year old and a mechanic to boot. All maintenance was meticulously...
  12. 2001asp

    Well guys It looks like a JEEP SRT8 is in my future....

    Yes my car is going up for sale, but so is my wifes. She just came into a little money has had the itch to upgrade her ride..She is currently driving a an 06 Pacifica. We like the car but she wants a sporty car. We will be swapping type cars.:shrug: She is gonna get a slightly used 911...
  13. 2001asp

    Which Brand o2 sensors?

    My o2 Sensors are trashed after 70,000 miles. I was told by my tuner to purchase only the ford o2 sensors. Well I went to Ford and there price was $94 per side. Thats alot of greenbacks. I went to Advanced auto and the Bosch cost $43 per side, and the Denso's cost $53 per side. Will the...
  14. 2001asp

    New Dyno Numbers....L/T Headers FTW!!!!!!!!!

    Here you go. My car is tuned again. The new and old dyno graph on top of each other 4 U 2 C. I made a bunch down low and up top. Last dyno session I had the stock gear, this has the 4.10. I had the tune done with the knock sensor kept on. The outside air temp was in the low 30s. The tuner...
  15. 2001asp

    Camaro SS goes down to a full 2001 Bolt-on Cobra...

    I met a 2010 SS on the highway today. He came up on my rear pretty quick. He had a passenger with him. He started to change lanes to pass me. I was cruising at 70-75MPH. I dropped a gear to 4th and when he got next to me I blipped it and then he dropped a gear and I let him get the punch, I...
  16. 2001asp

    WTS/WTT Stock Kmember, A-arms, Front Springs

    I have for trade/or sell a set of front 2001 Cobra Springs, A-Arms, and K-member. Make me a reasonable offer. I live in Chesapeake VA. 23320.
  17. 2001asp

    Pistol Grip shifter?????

    Do any of you use the pistol grip, B&M T-handle, style shifter Knobs. The Reaper shifter from UPR looks pretty nice in black or polished. I have a nice Tremec polished ball style shifter knob, but it is not the easiest to shift. Any of you have experience with these?
  18. 2001asp

    Dynotune+l/t headers=?????

    What kind of numbers do you think this combo will net for my car and mods? BTW, I had the Metallic cats welded on and it is just as loud with them installed as it was without them. The Exhaust is really raspy even with them installed with the 3 inch JBA I have. I would post a vid of it, but...
  19. 2001asp

    --==fs---magnaflow tru-catted x pipe==--

    I have for sale my Magnaflow Tru catted X pipe. I used it on my 2001 Cobra for about 2 years but it should fit all 1996-2004 GT/Cobra/Mach1's. It is stainless and in good shape. I can put up some pics tomorrow morning. I will let this go for $300 + shipping. Paypal is a must.... PIC Below....
  20. 2001asp

    Today is the day...K-member/header install

    I have given my self a 3 day buffer for removing and installing: Kooks headers, K-member, new koni shocks, front coilovers, new rear springs, front and rear bump steer, front cc plates.....wish me luckkkk:thumbsup:
  21. 2001asp

    2002 35th Ann. SS Camaro LOW MILES 441 HP

    Helping a friend out. If you like it,Chevrolet : Camaro:eBay Motors (item 290371480266 end time Nov-24-09 17:05:51 PST) BID on it....He is in the Navy and Transfering to the West coast and has to leave his SS behind. This Car was taken care of.
  22. 2001asp

    Which nitrous Kit and how much with stock internals for street?

    I was looking at all the nitrous kits out for sale and they all seem very vague. Is there a kit for a our cars that is better then the rest? Is there any add ons that I should consider/mandatory? How much should I use for a stock piston/rod Cobra? Thanx......:read:
  23. 2001asp

    got caught for speeding in VA Beach. 52/30 mph

    It will cost $176 if I just pay the fine and I was offered to just pay it vice showing up in front of the judge. I was very respectful to the officer. I do have a consealed permit to carry a firearm. When I pulled over, I shut the motor off and rested both hands on my window sill as the...
  24. 2001asp

    Kooks headers arrived...PICS

    Kooks stainless 1 5/8 collectors and 2.5" primaries headers and offroad x pipe. Cats will be welded in later. ImageShack -
  25. 2001asp

    who would win...Me or 2004 stock STI?????

    A guy I work with came up to me today and wants to run me in my 01 Cobra. He say's he is stock but seems very confident and cocky. My mods are in the sig....

Top