Up for sale is an Eagle Forged 4340 3.750" Stroker Crankshaft. This crankshaft will make 302 cubic inches with a standard bore, or 323 cubic inches with a 3.700" Big Bore. Crankshaft was balanced, but never use. Still in the box.
$800.00 shipped
Parting out a customers car that was in a wreck. 113,000 Miles. Engine is in excellent shape and ran strong. Engine is for sale complete from Throttle Body to Oil Pan. Includes stock fuel rails with 42lb Injectors.
Asking $3500.00 complete Or Best Offer.
Engine is at our shop in Winter...
Selling the Transmission and Converter that I was planning on using on my personal race car. Plans have changed in the past few months and we are going Big Block with a different style trans setup. The TH400 is good for 2000+ HP and has a Billet Input Shaft, Billet Intermediate Shaft and Custom...
Selling a Fully Built Teksid Shortblock. The Block was torque playe honed to 3.572" (.020") over. Pistons are -.012 in the hole.
Forged Cobra Crank that has been micro-polished
-9cc Dish Pistons with Tool Steel Pins, double Spiro Locks
Manley H-Beam Rods with the ARP 2000 Rod Bolt Upgrade...
Up for sale is the Ported Short Runner Intake Setup I was going to use on my 96 Cobra. Ended up deciding to build a big block, so all the modular stuff is going up for sale. This intake has never been ran since modification. Upper intake bridge has been cut out and smoothed for Accufab Race Oval...
Selling my backup set of Race Ported Navigator Heads. I have decided to go another direction on my drag radial car and no longer need these. They have never been ran. They are Race Ported with custom Custom Made Bronze Valve Guides for the Navi Ports, New Viton Valve Seals, Stainless Valves, and...
Up for sale is my Hp Performance Stage 3 2V Twin Turbo Kit. The kit includes the 2V headers, mid pipes with TIAL 38mm wastegates, all V- band clamps and silicone hoses with t-bolt clamps. The turbos are brand new Garrett Units. They are 67mm with .70 A/R compressor housings and .63A/R turbine...
Parting Out a 2001 Navigator Motor....
Have a pair of Black Navigator Valve Covers with Coil Covers. They will also come with 5 of the spark plug hole gaskets.
$120 OBO
Navigator Oil Pump with 15/16 pickup. Pretty sure its the same as the 4V 4.6, a Great upgrade from a smaller 2V oil...
Got a pair of 03/04 Cobra side mirrors for sale. They are in decent condition but do have a few light scratches/scuff on the painted part. They are painted black but will need to be paint matched anyways. Beside the scuff they are in great condition will all the electronics present.
Asking $120...
Bought for a customer's car and then they backed out. Includes McLeod 26 Spline Twin Disk Clutch, 8 Bolt Aluminum Flywheel, New Throwout bearing, a clutch alignment tool, and a new clutch fork mounting rod/ball. This kit retails for 1200+shipping. Asking $1050 Shipped.
Pics Below
I have a great pair of Aluminum IMRC Delete Plates for sale. They are extremely clean and every hole has been filled (not just the outside ones). All ports have been smoothed out and the factory casting flaws on the round ports have been blended down. Here are a couple pictures. Asking $140...
I have a pair of Composite IMRC plates that have been made into deletes. All rods and butterflies have been removed and all holes filled (not just the ones on the end). Also the ports have been cleaned up.
$110 Shipped
IMRC Controller with Cables -$30 shipped
Upgrading to something different. These came off an HP Performance Stage III Kit. Here are the specs.
T3/T4 configuration.
.70 A/R Compressor housing
66.7mm wheel
.48 A/R Ceramic Coated Turbine Housings
Car they originally came off went Mid 9's at 14X.
$1250 shipped for the set. $1200...
Selling because I just had a Turbo 400 Built for the car. This trans never gave me and problems, handles 540whp for quite sometime. Come with Pro 5.0 shifter, bellhousing for 4.6, and crossmember mount, and driveshaft spacer. I will also throw in an 11 inch clutch setup for it too. This will...
I know this is not the classifieds but I have 2 Turbos for sale that someone may want for a twin turbo build or just to upgrade. These are off a Hp Performance Stage 3/4 Twin Kit for a 96-04 Cobra.
Garrett 67mm Turbos. .70 A/R compressor and .48 A/R Turbine. T3/T4
Turbine Housings are Ceramic...
Going Auto. Had this trans in for about 7K miles. It worked flawlessly and never gave me any problems. Fluid was changed at about 4k and I just pulled it last week and it looked good as new. Setup includes Trans, Bellhousing for 4.6, Crossmember, Clutch cable with firewall adjuster, Pro 5.0...
Brand new in the box. Decided to go another route. They come with a flow chart from being matched. Paid $923 from Jegs. http://www.jegs.com/i/MSD/121/20158/10002/-1
$600 shipped obo
I have an Hp TT kit installed on my 96 but it isnt totally done yet. I bought the kit without exhaust. I am getting ready to install .82 A/R turbine housings and build my own downpipes. Do yall think 3" is good or should I step up to 3.5" downpipes?
Going turbo so the Vortech Setup is for sale. Everything is in great condition.
This is the complete bolt on system and includes everything you need besides injectors. The Headunit is a V1 S-trim with about 7K miles on it. No shaft play or any problems like that. The discharge piping is brand...