Anyone know if the 99-04 GT with 17" startfish wheels use shorter lug nuts? The McGard nuts I use on my BBS wheels won't fit under the center caps of the OEM 17" starfish wheels.
These are the starfish wheels:
I currently have a pair of used UMI Performance Rear Lower Control arms (adjustable length) that I haven't gotten around to install.
1999 - 2004 Ford Mustang Single Adjustable Lower Control Arms [1014] - $189.99 : UMI Performance, Inc.
A local deal has come up on Maximum Motorsports...
Looking at buying a set of 03-04 Cobra seats in apparently great condition for $700 (front and rear) - but what I really want is good lateral support which my stock 2000 GT seats completely lack.
Will these be a worthwhile upgrade for good support, or am I better off buying some quality Corbeaus?
If you are selling a set of BBS RK wheels or just the rears please let me know. Looking to buy - contact me via PM or e-mail me at [email protected]
Thanks,
Phil
I currently have an aftermarket head unit in my 2000 GT that uses the Metra #70-5510 harness which integrates the Mach460 sound system.
I would like to remove the Mach460 amps and speakers, and run a 2-channel amp to a pair of components 6.5" speakers in the front doors.
Will I need to...
I am debating whether or not to get a pair of OEM Leather Recaro's (used from a '13 GT) or a pair of suede black Corbeau LG1 seats for my 2000 GT.
The Recaros will require modification to the seat rails to get them to work on my car, where as the LG1's come with the correct seat rails to bolt...
Has anyone here managed to fit 2013 Mustang Recaro seats to a new-edge 99-04 Mustang? What was the process like? Is it the same as trying to fit regular S197 seats to the 99-04? Do the seat rails need to be removed and the 99-04 ones welded in?
I have a 2000 GT that is in great condition with the usual bolt-ons (shorty headers, full exhaust, 3.73 gears, struts/springs, intake plenum, throttle body, SFCs, canned tune), but the car feels sluggish around town, isn't good on gas, is very rough over uneven pavement, and just overall I am...
I would love a set of these wheels for my car, however I believe the offset isn't suitable for the SN95.
Has anyone run a set of these on an SN95? Any clearance issues? Pictures? What is the offset? It is listed as 7.2" backspacing (what is that in terms of the usual mm offset?)...
I was told my T-45 transmission has a very slight bend on the input shaft, however after testing a spare clutch disc on the input shaft, I fail to see how there is a bend. I was able to slide the clutch disc onto the input shaft, however it didn't quite make contact with the throwout bearing...
I purchased a King Cobra "economy" clutch kit from UPR about 2 summers ago and I am finally getting around to installing.
UPR said the throwout bearing included in the kit is supposed to be part # D9ZZ-7548-A however there is no Ford logo etched into it or any part number. I am worried that...
Can anyone tell me if the 03-04 Cobra flywheel is aluminum or steel? If aluminum, can it be resurfaced (i.e. does it have a removable friction plate)?
I am trying to see if I can get a used one locally to resurface and put into my 2000 GT (anyone know if this will fit, my '2000 GT uses an 8...
My clutch died this past weekend at the track, and my mechanic thinks I may have burnt the flywheel to the point it needs to be replaced.
Question is, can I use the 11" 8-bolt aluminum flywheel from the 03-04 cobra on my 2000 GT with the 8 bolt crank and 10.5" clutch?
-'04 oxford white hardtop cobra
-132k miles
-was hit in the front but repaired "(owner says it wasn't a serious hit), clean title
-stock except for intake plenum/throttle body
$14000 firm is what the seller says, and that doesn't include the wheels
2004 Cobra SVT Hardtop Oxford White...
I have been pondering the thought for a while now of selling my 2000 GT for either an 11+ 5.0 GT or 06+ C6 Corvette. I have never driven the new 5.0 nor a C6, but I have a feeling when I go for test drives this spring, that the decision will be made right there.
I like my GT, it is extremely...
Anyone know how difficult it is to remove seat rails from 99-04 mustang for use on aftermarket seats? Is any cutting or anything else required? Or do they simply bolt off?
Thanks
A local guy has a pair of Ractive Racing seats for sale. Anyone know how good these things are?
Also they are from a foxbody - will they bolt directly to my 2000 without any issues?
Anyone here using the aftermarket fiberglass 03-04 cobra hood on their 99-04 mustang? Any fitment issues or any other issues in general? I am thinking of throwing one on my car before I get other parts painted and any input would be great.
Any issues of warping under sunlight, pinholes...
Anyone here running a super yelllow 3000k HID kit in their 03/04 cobra bumper fogs? What about any color HID kit in the 03/04 combra fogs? Any comments or pictures? Is it easy to wire an H10 kit to the fogs? Any space restrictions?
Thanks
I am looking at changing the cluster on my car and need to disable PATS to do so. Does anyone know if there is a module that I plug in, or something else I can do to easily disable PATS?
I do not want to pay a tuner $500 to tune the car + $300 for the hand held unit just to disable it. I am...
I installed Tokico Illumina shocks on the rear of my 2000 GT, and the washers that came with are too wide and do not fit ontop of the shock towers in the trunk.
I would normally just replace it with a smaller washer, however these are special angled washers that are more of a hat-shape...
I recently purchased a Maximum Motorsports Panhard Bar kit for my 2000 GT. I haven't had a chance to install yet, but have read that it may not clear my Bassani catback. I have an opportunity to buy a local Griggs Racing panhard bar.
Would anyone use one instead of the other? Is any really...