This engine was in a vehicle that rolled over. I purchased the whole car after my buddy wrecked it last year. The spark plugs were removed, and the top of the pistons were checked for oil.
It was bumped over and cycled before new plugs were installed and the engine fired up. The engine runs...
Just looking for something to put this 5.4 engine/trans in, or I'm gonna start the hunt for all the conversion parts.
Let me know what you have, also any wrecked trucks
I'm in knoxville TN.
Dustin
I have a 96 cobra convertible.
63k org. miles
maroon, black top, black leather interior from 99 GT.
this car had a tan interior from the factory I changed it over to black (looks much better)
4.6 DOHC 5 speed 3.55 gears
Lowered 2 inches with H/R Lowering springs (fresh alignment)...
Ok,
I just got an 03 mach 1 with a KB kit already installed. I have already managed to blow the belt and have no idea of the belt lenght. I've emailed KB, and a couple other online places but have not getten an answer.
Does anyone know what size belt it supposed to be on this kit. I have...
I'm in the market for a supercharger. Looking for either the Older KB 1.7 kit or a non intercooled procharger or paxton kit. really looking for something that does not require tapping the oil pan.
Let me know what you've got.
Email me pics or offers to [email protected]
Dustin
Its the one that holds the switches. There are two tabs I guess I'm real lucky both the tabs on mine are broke. It appears I'm not the only guy with a vert that has this problem.
Looking for price shipped to 37716. Must have both tabs in good condition.
Thanks
Dustin
Hey guys looking at buying a lightning. I totaled my truck today on the way to church so I'm in the market for a lightning.
I have no idea of the market on the trucks right now, so any help would be great.
I'm looking for stock to mild. It can be hurt (needing engine/trans work) or have a...
I know I need pics to get this thing sold, but I'm gonna use this as a starter thread.
It is a 96 Cobra Convertible
Maroon
It has a tan top and had black and tan interior (all black now).
I have changed the entire interior out to black (leather) out of an 01 GT. The top is brand new but...
So i finally rounded up all the parts for the KB setup and I've decided to go turbo.
Here is what I have for sale:
2.1 KB kit for a Mach 1
Single belt setup
I have UPGRADED THIS KIT AS I PURCHASED
The kit from KB retials for 6799.00 (new)
It included the following:
2.1 KB...
I am listing all the cobra body parts left over from my last build. These parts are all ford parts no aftemarket here. Pics will be available if interested. I would like to either sale all the parts as a whole or get people interested in them before I let them go.
I have the following parts...
I have a t56 six speed from an 04 cobra it had 22k on it when i bought it for my car, and I may have put another 1k miles on the trans.
It comes with:
McCloud twin disc clutch
Alm. Flywheel
Short throw shifter
alm drive shaft
You will need a cross member and mount as this was in my...
Hey guys thanks for reading.
Here is what I have:
4.6 Alm block, 03 Ported Heads, GT40 cams, all forged stroker (5.0) Kit. This is all going in a 97 cobra. I have a complete stock 03 Eaton setup here at the house that is already paid for. I can get a ported Eaton for a decent price run...
Hey Guys,
Just as the title says I need a 96 cluster. It has to be a 96 the other years wont work from what I can tell. All the gauges except the coolant gauge work.
I tried to put a good 97 cluster in and the coolant gauge pegs all the way over on Hot. I tried chaning between the three...
I have a 97 Mustang GT with just under 72K miles I bought this car not running with plans of making it my Daily Driver. I have a 97 Cobra with an 03 swap and Kenne Bell.
So this car did not have an engine or wirning harness when I purchased it. I have ran out of money to finish MY cobra...
Just like the thread says guys, UPS and their wonderful shipping has runined my bypass valve from the Kenne Bell I just bought. I need one so I can run my car any help on finding one at a good price would be awesome.
Just shoot me an email if you have a source or have one for sale...
I have a used vortech S Trim SQ (the quiet one) From MY 97 Cobra, but I have the bracket for the 96 to 99 GT
It comes with the following:
S Trim
Bracket for 96 to 98 cobra
Bracket for 96 to 99 sohc GT
Anderson Power Pipe
83mm Mass Air (calibrated for 24lb injectors)
Paxton alm...
I have a used vortech S Trim SQ (the quiet one) it comes with the following:
S Trim
Bracket for 96 to 98 cobra
Bracket for 96 to 99 sohc GT
Anderson Power Pipe
83mm Mass Air (calibrated for 24lb injectors)
Paxton alm discharge tube with welded in BOV Flange
RFL BOV
Vortech discharge...
Just like the title says:
I need a couple 5.4 blocks and 8 bolt forged cranks.
Let me know what you have and a shipping cost to Macon GA 31210
Pics to [email protected]
Dustin
Hey guys just bought a lightning setup for the wife's expedition and dont need the drive shaft. I'm looking for 250.00 shipped anywhere in the cont. USA.
can have pics email request to:
[email protected]
Dustin
I have the complete intake from my 97 cobra. Car had 85k engine had about 10k.
complete from the TB to the Imrc plates. will include 24 lb fuel injectors and the mass air with fuel rails. Dont have an air intake it was supercharged.
looking for 600.00 shipped anywhere in the cont. US...
Ok here is what im looking for:
This is going in a 97 cobra
TKO 600
4.6 bell housing
Clutch (one that can be rebuilt is fine)
I also need to know:
What drive shaft do I use? Length?
What cross member do I need?
Are there any other Items needed for the swap?
I have a t56 with...
97 Cobra convertible (Laser Red)
86,000 Miles (org engine and trans)
Black and Tan Leather Interior
18" polished cobra R (knock offs)
New Tires
No wrecks will give vin for car fax if requested.
Paint and Interior I would rate at a high 7 out of 10 (car is 11 years old)
I will have...