Search results

  1. 99lightning_svt

    For those with a stripped fuel hat bolt. What is the best fix?

    Okay guys apparently the shop and put my car back together stripped one of the bolts on my fuel hat. I didn't find this out until I filled the tank last night. I dropped the tank and found it’s leaking around the hat. Grabbed the 1/4 ratchet and low and behold one is 100% stripped. So what’s...
  2. 99lightning_svt

    Battery rolled over in trunk. Shorted out. New battery. No power. Where to start?

    The battery rolled over in the trunk. Long story short I had a trunk full of battery acid and the battery was completely shorted out/dead. I replaced it with a Optima 78 series with the vent ports. The issue I’m having is I have no power inside the car although with the key In the ignition I...
  3. 99lightning_svt

    Trunk lid won't stay closed please help ‍♂️

    Heh guys as stated my trunk won't stay closed after getting it back from the shop. I can take a screwdriver and try to lock it closed but it releases. It's like the latch is not locking. Anyone have any idea how these lock up? I'm sure it's something simple. I'd rather not replace the whole...
  4. 99lightning_svt

    FOR SALE: Boost a pump, stage 3 spec clutch disk 10 spline, t-56 input shims, clutch quadrant adjuster

    Cleaning out the closet Boost a pump $150 Spec stage 3 clutch 10 spline less than 1000 miles $150 T-56 input spline shims. Best offer Clutch quadrant adjuster. Best offer You can reach me at [email protected] for faster service. Thanks guys
  5. 99lightning_svt

    Short pull last night then no power to the wheels… no pop no crack nothing. Where do I start?

    I did a quick pull last night when I hit third and it redlined, put in forth and still no forward movement. I’m not getting any power to the rear wheels. I would Imagine if something in the rear it trans broke I would hear something. I’m thinking I may have blown the input shaft to the...
  6. 99lightning_svt

    Oil cooler Plug size needed

    Hey, guys got my car back from the shop today and by the time I got home, it was leaking oil. It looks to be coming from an old sensor in the bottom of the oil cooler. Does anyone know what size thread this hole is? I know how rare these oil coolers are and dont want to crack it or bugger the...
  7. 99lightning_svt

    Paint shop in dfw

    Looking for a decent painter in DFW anyone have any leads?
  8. 99lightning_svt

    Dual FPDMs / Pre BAP / AEM 320 Pumps / Blowing 30A fuses like crazy HELP

    This car has been sitting for years now trying to get these fuel issues sorted.... Please help me! I Installed dual FPDMs, installed new power wires so each pump has a a dedicated set of lines to its individual FPDM. I have a fused 8G wire to the BAP relay, with a 40A relay. Im blowing the...
  9. 99lightning_svt

    04Sleeper advice needed

    Kevin, I wanted to pick your brain about E85 in DFW, i posted in the Distillery to keep the information searchable. I'm currently running a built motor stroked to 5.0 with stage 3 blower cams, topped with a Snakebite blower. I have two E85 AEM 320s in a stock hat with 60lb injectors and a...
  10. 99lightning_svt

    DTC P1237 & P0453 Blown in tank fuel line.

    I need a bit of help guys. I've been having issues with the car pulled those two codes. Dropped the tank, found the fuel line from the pumps to the hat had blown. The power wires were also a bit burnt... (Stock Cobra hat with two AEM 50-1200 320 LPH) Here are my questions for the guys in the...
  11. 99lightning_svt

    67 RS / SS Camaro

    67 RS / SS Camaro with 3 speed automatic transmission, 383 Stroker, and clear title. It has Nitto NT555 tires, American Racing wheels, Hooker Headers, Holly Carb, Edelbrock Intake. The motor is a 383 stroker but I do not know what parts were used, with as much money was spent on this car and as...
  12. 99lightning_svt

    Boost A Pump fried wiring and melted fuse. I need help...

    Hello, Today i decided to pull the car out and do some cleaning and maintenance. I happen to come across this, a melted fuse and burnt wires. I'm really not sure when this happened since i rarely drive the car. I'm going to guess it was rewired when i had cams put in a couple years back. I...
  13. 99lightning_svt

    F/S Mishimoto Radiator

    Was on my car less than 1000 miles asking $150 Contact me at 8178076848 [email protected]
  14. 99lightning_svt

    2011 Black Manual with 34k Miles for $26K

    Here is a Black 2011 Corvette 2 door coupe with only 34k miles! This car is beautiful with the ZR1 Style Front Lip. Power Everything, No Damage Runs and drives perfect the Manual Transmission shifts like butter! The vehicle listed is located in Fort Worth please feel free to call me with any...
  15. 99lightning_svt

    Corvette 2011 Black $28k

    Here is a Black 2011 Corvette 2 door coupe with only 35k miles! This car is beautiful with the ZR1 Style Front Lip and also has brand new RunFlat tires. Power Everything, No Damage Runs and drives perfect the Manual Transmission shifts like butter! The vehicle listed is located in Fort Worth TX...
  16. 99lightning_svt

    Comp Cams Supercharged/Nitrous Stage III Camshafts 96-04 Cobra

    Comp Cams Supercharged/Nitrous Stage III Camshafts 96-04 Cobra, Mach 1 $1050 shipped available for local pickup in Fort Worth Texas 817-313-5684
  17. 99lightning_svt

    Comp cams stage 3 Brand new in the box

    Comp cams stage 3 Brand new in the box $1050 Shipped 817-313-5684
  18. 99lightning_svt

    Stage 3 comp cams New in the box

    Comp Cams Supercharged/Nitrous Stage III Camshafts 96-04 Cobra, Mach 1 $1050 shipped available for local pickup in Fort Worth Texas 817-313-5684
  19. 99lightning_svt

    Centerline Forged - Split Spoke Drag Set Up

    WTB Driver a Pillar, Wiper Cowl, Stock Blower, ALL PRICES ARE OBO OR TRADE A pillar gauge pod Auto Meter sold 4.10 Gears 2k on them $110 shipped 2 Oil Coolers 1X01 cobra and 1X03-04 cobra 03-04 complete Oil Cooler $150 01 oil cooler by it self $120 Last but not least an oil cooler...
  20. 99lightning_svt

    4.10 Gears, Oil Coolers, Gauges, A pillar Pod, Drag Wheels,

    4.10 Gears 2k on them $110 shipped 2 Oil Coolers 1X01 cobra and 1X03-04 cobra 03-04 complete Oil Cooler $200 01 oil cooler by it self $140 Last but not least an oil cooler adapter with a crack in one of the two sensor ports. This would be used for a turbo kit or possibly just weld the hair...
  21. 99lightning_svt

    AutoMeter A Pillar Pod, Poor Man Gauges Etc...

    WTB Driver a Pillar, Wiper Cowl, Stock Blower, ALL PRICES ARE OBO OR TRADE A pillar gauge pod Auto Meter $50 shipped 3 Gauges Boost, A/F rattles needs tlc, and Temp, $50 shipped 4.10 Gears 2k on them $110 shipped 2 Oil Coolers 1X01 cobra and 1X03-04 cobra 03-04 complete...
  22. 99lightning_svt

    Oil Coolers, 4.10 Gears, Etc...

    WTB Driver a Pillar, Wiper Cowl, Stock Blower, ALL PRICES ARE OBO OR TRADE 4.10 Gears 2k on them $110 shipped 2 Oil Coolers 1X01 cobra and 1X03-04 cobra 03-04 complete Oil Cooler $200 01 oil cooler by it self $140 Last but not least an oil cooler adapter with a crack in one of the two...
  23. 99lightning_svt

    05 GMC 2500 + Everest 5th Wheel Package Price or Separate

    This truck and trailer combo is for sale by my Grandfather, he ordered the truck specifically to pull this trailer. This is not your everyday RV sale because of finances or lack of use, he is selling due health reasons. The truck and trailer have been well maintained by a very experienced...
  24. 99lightning_svt

    Oil Coolers And Adapters

    Up for sale 2 Oil Coolers The first a complete oil cooler kit with Gasket, Oil Cooler, and Oil Cooler Adapter $200 The second an oil cooler by it self $140 Last but not least an oil cooler adapter with a crack in one of the two sensor ports. This would be used for a turbo kit or possibly...
  25. 99lightning_svt

    Oil Coolers And Adapters

    Up for sale 2 Oil Coolers The first a complete oil cooler kit with Gasket, Oil Cooler, and Oil Cooler Adapter $200 The second an oil cooler by it self $140 Last but not least an oil cooler adapter with a crack in one of the two sensor ports. This would be used for a turbo kit or possibly...

Top