Search results

  1. T

    Steeda Tri-Ax shifter for T56, $100

    I'll split the shipping with you, so it'll be $108 to 62966.
  2. T

    Steeda Tri-Ax shifter for T56, $100

    Barely used, because I switched to a MGW right after I bought the Tri-ax Now I have a T56 magnum, which uses a different shifter
  3. T

    MGW shifter for T56

    Larry, the shifter is still available. I sent you an email
  4. T

    MGW shifter for T56

    New, it came with only one (orange) handle . The handle rotates around the shaft, and can be set in any positions. This is what makes the MGW unique from other shifters.
  5. T

    T45 input shaft, 10 spline, $65

    Leftover from my T45 rebuild 10 years ago, had 35k miles. $50 if local sale (Leonardtown MD)
  6. T

    Driveshaft Shop 03-04 3.5" Dampened Aluminum Driveshaft New in Box, and 1350 yoke

    SOLD This 3.5" Dampened DSS Aluminum driveshaft is too long for my application 99 GT + T56 Magnum, and was never installed. The 1350 pinion yoke (required for that driveshaft) was installed and then removed when we found out the shaft was too long, so it was never used. I bought them from the...
  7. T

    MGW shifter for T56

    I switched to a T56 Magnum, and this shifter doesn't fit that tranny, $125
  8. T

    Quicktime Bellhousing for T56 RM-8080 New in box

    QuickTime Part number RM-8080 I bought this for my T56, only to find out that it wouldn't fit between my BBK longtubes. So it was never installed. Comes with everything: spacer plate, hardware, instructions, stickers, etc, just as shown in photo. These are $700 new, $460 shipped, $400 if...
  9. T

    Driveshaft?

    I have a new-in-box dampened Al driveshaft for an 03-04 Cobra for sale, if you're interested. It was 2" too long for my 99 GT + T56 Magnum https://www.svtperformance.com/threads/driveshaft-shop-03-04-3-5-dampened-aluminum-driveshaft-new-in-box-and-1350-yoke.1170539/
  10. T

    What is the purpose of this? (big opening on T56 Magnum)

    Tranny already has a clutch fork/cable installed, must be for inspection, like 98 SVT said. Thanks
  11. T

    What is the purpose of this? (big opening on T56 Magnum)

    See photo (up is up down is down) It is on the upper part of the tranny, but I still worry about water, dirt, etc, getting in there. Anyone know why it's there, and if there's any problems closing it up? (I was just going to use a metal plate and rtv) The red thing you see inside is my clutch...
  12. T

    First visit to the strip with the truetrac

    Got a new best 1/8 MPH, although my 1/4 ET/MPH didn't quite beat my prev best. I couldn't believe it when I saw a 1/8 MPH of 107.76 mph on the slip (usually run 101-103). My only explanation is the truetrac differential I just put in. The car felt different right off the launch, I didn't have...
  13. T

    Detroit Truetrac durability on dragstrip with slicks, clutch dumps, etc

    I know that a Detroit Locker or a spool would be better, but I would like to be able to turn occasionally. I've read a ton of mixed opinions about the truetrac. It's actually kind of odd: some people beat the hell out of them on the dragstrip with 600rwhp, slicks, clutch dumps, etc, and say...
  14. T

    faceplated T56 is finally shifting correctly

    I've been fighting some issues with my faceplated T56 (actually, just 3rd and 4th are faceplated), and it seems that they are finally resolved. Here is an in-car video of my first pass at Cecil yesterday. Notice how clunky the 1/2 (synchroed) shift was, compared to 2/3 and 3/4 (faceplated)...
  15. T

    clutch air gap for faceplated tranny

    I just tried out my newly rebuilt T56 (with 3/4 faceplated) on the dragstrip. The 2/3 powershift was perfect and amazing while 3/4 grinded badly every time. I am trying to figure out if there's something wrong with the tranny or if its something else. Some people are telling me I need more...
  16. T

    Faceplated T56, high RPM grinding/lockout wtf?

    A couple weeks ago, I got my T56 rebuilt, with 3rd and 4th faceplated. Today was the first time on the dragstrip. In all 4 of my passes, the 2-3 WOT powershift was amazing: fast and effortless, I still can't believe it. But my 3/4 powershift resulted in a horrible grind in all 4 passes. I...
  17. T

    Can a built, synchroed T56 handle repeated 7k shifts on the drastrip?

    Trying to decide whether to faceplate my T56 or rebuild it with synchros. I'm running mid-10's at 134-136. I have a "high RPM" set-up (centri blower, short runner intake). I have to keep the revs high and not let them drop much between shifts to get my best times. There is a huge advantage to...
  18. T

    03 Cobra Shortblock in a blown 99GT

    I'm considering getting an 04 Cobra shortblock for future use. Keeping it 2v, and with an S-Trim blower, what other modifications would be necessary? I've read a lot of posts and I'm getting a lot of different information. Here's some of the stuff/concerns I heard: (1) Need new...
  19. T

    ATF coming out of shifter at high rpms

    I got pulled over a few times at the dragstrip b/c my car was smoking. It was an ATF leak from the shifter area, that was dripping down on my exhaust. The tranny (T45) wasn't overfilled -the fluid level was just beneath the fill hole. It wasn't coming out of the vent pipe either. I took the...

Top