Search results

  1. Venom351R

    Is my boost bypass valve set up correctly?

    I drove the car for the first time up here since getting in in January. I noticed that the factory boost gauge is not reading anything and the blower does not have any whine to it. It has a lower crank pulley and upper pulley and I've been told its been ported. It should scream, but its silent...
  2. Venom351R

    Don't ever sell your Terminator..... you will just buy another one

    Before I had my first one I was one of these people who said I'd never sell mine after I get one. Well I finally got one and 3 years later I sold it. That as this past March and fast forward to now and after getting a GT350 and getting a Foxbody for a bigger type of project I just was not really...
  3. Venom351R

    My 1993 Foxbody Build.

    I picked up this 1993 Fox a few months ago with the plans of doing a full build on it .The car was originally sold in Alabama and then went to FL and I bought it from someone in CT who had it a short while. My main goal was to get a rust free fox and the overall rust condition of this car was...
  4. Venom351R

    Are the BMR K Members fixed?

    I searched through multiple pages and could not find the original thread and the search was of no help at all. I know awhile ago there were some issues with the BMR K members and fitment problems. Have those issues been resolved to anyone's knowledge?
  5. Venom351R

    My 2022 Bronco Build.

    It all happened pretty fast but I decided I wanted to get into a 2022 Bronco. From what I had seen the people who have them like them a lot. After going to my current dealer and seeing that they charged $5,000 over MSRP I did some shopping around and found another local dealer who sells them at...
  6. Venom351R

    Interior squeeks and rattles.

    To make it clear I'm not complaining I've had four 1994-2004 Mustangs all with this same interior. On my 04 Cobra it definitely has some squeaks and rattles I'd like to address or find the cause of. I'm only bringing this up because I drove an 04 Cobra yesterday that someone bought locally who...
  7. Venom351R

    Upgrading my clutch, am I missing anything?

    I've surpassed the limits of my stock clutch so in the off season that is being upgraded and I want to replace many of the other components that go with it. Just want to know if there is anything else I should get or if I am missing anything? McLeod RXT Clutch ( With Flywheel ) Ford Throw Out...
  8. Venom351R

    VMP Gen3R Dyno Results

    Long process this summer but after a very long time I finally got the Cobra back yesterday. The dyno was done on labor day. Mod list is Borla stingers, Bassani Catted X pipe, Fore return system, 80# injectors, VMP Gen3R with the VMP 5" intake and single blade throttle body. 3.3 upper, stock...
  9. Venom351R

    2000 R on BAT 886 Miles. First one to break $100K??

    Considering one sold on BAT earlier this year with 2,500 miles for $98K I can see this one busting through the $100K barrier for the 2000 R 886-Mile 2000 Ford Mustang SVT Cobra R
  10. Venom351R

    So glad I bought my 04 Cobra when I did

    I started to really want to get an 03/04 Cobra back in 2018 as far as making preparations to make it happen. The plan was to buy one in the spring time ( April - May ) of 2021 once my truck was fully paid off. Had one of those epiphany moments last summer with an 04 that I knew was for sale but...
  11. Venom351R

    Sign the RPM Act Here

    We can all agree that we do not want to see the limitation or ban on being able to modify our cars ( No matter the make model year). One way to show support for the RPM Act is to contact local representatives. Only have to add your name / address and there is already a pre typed email that can...
  12. Venom351R

    Belt Length Question For This Setup

    Currently I run a 75" gates green belt with my 2.76 upper, stock lower and billetflow 4 piece idler set. I recently bought a KMJ Titan alternator and to keep it in the happy range I'm going to have to go up to a 3.2" alternator pulley. Will going from the stock pulley size with my current set up...
  13. Venom351R

    2000 Cobra R Brembo questions.

    I have the brembo 00R upgrade kit on my 04 Cobra. I'm in the process of tearing them down to do a rebuild kit and to get them powder coated. I'm replacing some of the pistons due to maring on them from trying to get them out ( was not able to use the air compressor method at the time ) The...
  14. Venom351R

    Blistein HD Dampers Package ( Maxium Motorports )

    I'm looking to change up my suspension for 2021. I'm building my Cobra as a street car so I want something that handles and drives well on the street. It currently has the Maximum Motorsport Race 3 coil over set up and rides like trash on the street. I plan on running the Blistein HD dampers...
  15. Venom351R

    K&N Series 57 FIPK Cold Air Intake

    Has been clean and re oiled. Had to use blue oi I did not have any red available. I also have the flange bolts that bolt it to the MAF housing if you need them ( am missing 1 though ) $140 shipped to anywhere in the US.
  16. Venom351R

    NADA / Edmunds VS KBB Value Differences?

    Just wanted to know if any of you had any insight on why there is such a discrepancy between NADA, Edmunds and KBB as far as 03/04 Cobra values? I took the value of an 03 with 40,000 miles and excellent condition and NADA valued it at $14,600 and using the same mileage and condition on KBB it...
  17. Venom351R

    FOR SALE: Dynomax Side Exhaust.

    Comes with the Super Turbo Mufflers. One side is painted in High Temp paint, I did not get a chance to get to the other side. Had them installed for a few months they sounded great but decided to go with a different exhaust set up. This will fit any 94-98 they are 2.5". Also have a pair of SVO...
  18. Venom351R

    94-98 SVO Side Skirts

    Svo side skirts are being sold
  19. Venom351R

    Need a quick answer to a 95 r specific part

    I need the correct part number for the 95 rear main seal. The shop that is fixing the car and the ford dealership is having a hard time finding it.
  20. Venom351R

    RIP Steve Anderson 1941-2010

    I was unaware of Steve's passing until I read the recent issue of MM&FF. I searched online but could not find anything on it so I just snapped a few pics from the mag for those of who who may not have known. Thank you Steve for all you did for your part in making the Cobra R Mustangs some of the...
  21. Venom351R

    Anyone Have Any Stock Dyno #'s On The 95R

    Just wondering what the 95R put down stock so I can compare how much I have gained on mine w/ its current mods. Here is my most recent Dyno sheet with a re tune done on monday. No correction either.
  22. Venom351R

    New Track Times Today

    Today I was finally able to go to the track today w/ the Cobra running 100%. I have made some previous trips but was chasing issues all summer long but today made up for all of it as I got a new best 1/4 time and 60' time I wanted to do more runs ( I had 3 good ones) but the engine...
  23. Venom351R

    New Dyno Numbers.

    My 97MM DXB meter died on me back in may. I recently got the Cobra re tuned w/ the PMAS 95MM Velocity Meter. I picked up a few more HP at the top end but what really changed is how much more power it pulled through the whole RPM range. It was tuned this time w/ a base timing of 12* compared to...
  24. Venom351R

    Problem Solved, The Cobra Runs!!!!

    I had been chasing a problem w/ the Cobra since mid May. It would break up at 4,000 RPM's and the problem progressed from that to the car starting up and stalling out a few seconds later. These are all either parts I replaced or borrowed from someone else to see if mine was good, Coil, wires...
  25. Venom351R

    1995 R pistons?

    What type of Pistons came in the 95 R, how boost friendly are they? Anyone know the boost/power level of the stock internals and block? Thanks!

Top