Price is $290 shipped anywhere in continental U.S. Or $240 picked up in Ventura, CA. If shipping exceeds $50, I'll eat the extra cost but if it is less than $50, I'll refund the difference to the buyer.
Part number FHP2096MU. Bought this for my 96 Cobra and then found out it wouldn't work...
As the title says, I'm looking for the Mach 460 panel with the speaker grills, preferably from a 94-98 Mustang. Hopefully someone local to SoCal has one so that we don't have to deal with shipping but send me a PM anyway with what you've got and a picture or two. The temporary panel I had in my...
I updated the stereo system in my 1996 Cobra so I have several items available:
Rear deck complete with two speakers, two tweeters and two amps, everything works as it should; $100 plus shipping and paypal fees.
Rear deck complete as above but one amp is bad; $75.
Pair of Front...
My concerns about the piston side loading caused by using the custom pistons and required shorter 5.85" connecting rod needed for the 3.8" Kellogg crankshaft have not been alleviated. In fact, I'm about 99% convinced that I should just stick with a stock stroke 4.6L build.
Does anyone out...
My concerns about the piston side loading caused by using the custom pistons and required shorter 5.85" connecting rod needed for the 3.8" Kellogg crankshaft have not been alleviated. In fact, I'm about 99% convinced that I should just stick with a stock stroke 4.6L build.
Does anyone out...
My concerns about the piston side loading caused by using the custom pistons and required shorter 5.85" connecting rod needed for the 3.8" Kellogg crankshaft have not been alleviated. In fact, I'm about 99% convinced that I should just stick with a stock stroke 4.6L build.
Does anyone out...
Stage 2 ported B heads with Comp Beehive springs, Comp steel retainers, stock valves, stock valve guides. Mileage is unknown, no flow numbers. Rockers and lash adjusters are NOT included. Cams are NOT included.
I bought these heads from user "91SVTCoupe" on here back in March. Here is the for...
hey guys.......Recently I won an engine from this ebay auction:
Fully Built Teksid 4V Modular Motor Cobra | eBay
Because the guy had zero feedback, I called the phone number in the auction description and talked to him extensively about the engine. What he had to say sounded good but I...
hey guys.......Recently I won an engine from this ebay auction:
Fully Built Teksid 4V Modular Motor Cobra | eBay
Because the guy had zero feedback, I called the phone number in the auction description and talked to him extensively about the engine. What he had to say sounded good but I...
Basically back on February 6th a buddy of mine was a friend of Prestige Mustang on Facebook and shared with me a post that Prestige was parting out a low mileage 1996 Mystic Cobra. I called Prestige Mustang right away because these parts don't last long. After spending half an hour on the phone...
This came installed on a T45 trans from a 97 Cobra that I bought used. The trans only had 20k miles on it, so this probably has a lot less than that. Check out the pics, it looks nearly perfect except for the slight gouge near one of the mounting holes.
Does not come with the original bolts or...
This squeak and ticking happens when the car is accelerating from a dead stop and rpm increases from 500-1300rpm and then the noise just stops.
The clutch is all the way out and it's basically accelerating from idle.
No noises at idle. It only occurs when the car is on the ground moving forward...
I got my '96 Mystic Cobra tuned a few weeks back after installing a bunch of stuff. Stock longblock with 183,000 miles on it with the following mods;
American Racing Headers 1 5/8" longtubes, o/r x-pipe, Magnaflow catback
JLT fenderwell intake with LMAF, stock untouched 96-98 Cobra intake...
Sending me a PM is the best way to get the quickest response!
Tokico Blue front struts, 94-04 years but can be used on a Fox with v8 spindles, good used condition, just cosmetic blemishes, 50k+ miles on them still and still work great. $125 shipped for the pair. I have two pairs of these...
Removed from my 1996 Cobra so that I could install an MGW shifter. Nothing wrong mechanically, just some cosmetic scrapes. $100 shipped. PM me for quickest response!
***PM me with an email address for pictures!***
Just as the title says, pipe is used for 40k+ miles but in good shape. The included oxygen sensors are the upstream sensors because I couldn't remove them. Selling because I installed American Racing longtubes and x-pipe on my 96 Cobra.
$125 plus...
Just as the title says, I'm looking for a pair of black door panels in excellent to mint condition for my power window '93 Mustang hatchback. The armrests and speaker covers must be included. No tears in the material, no breaks in the rubber dew wipe at the upper edge that contacts the window...
My condolences to the family of the two victims who passed as a result of this car accident.
I saw this news story on WGN (no idea why I'm getting chicago news in Florida) and just happened to notice one of the cars involved in the deadly crash was a '97 Pacific Green Cobra.
2 killed in...
I have a pair of excellent condition used Goodyear Eagle F1 GSD3 tires. The size is 275/40ZR-18. These are the tires that I bought from username CSD on here and now they are available again. They have about 5000 miles on them, plenty of treadlife left above the wear bars. They were used as front...
This is the bracket you want for the drivers side if you've completed the COP ignition conversion on your 96-98 Cobra because it is much more "low profile" than the factory aluminum bracket which is large and bulky because a coil pack has to mount to it.
I've got two of these brackets for sale...
I don't know why I waited until now to ask, maybe because I no longer have the contact info for LDC? Anyway, about the adjustment on this thing......How do you know when it is adjusted properly? I have a squeak or chirp everytime I push in the clutch pedal and I traced it to the spring from the...
Does anyone have the 15x8 size of these rims on the rear of their 94+ Cobra
WITH the Cobra rear brakes? I'd like to pick up a pair of these because of their claim of "no grinding of the caliper" for installation but haven't been able to verify that this is true for the 94+ Cobra rear brakes...