Search results

SOLD SOLD SOLD

1997 Mustang Cobra #1617 VIN: 1FALP47V0VF120330 Title: Clear no liens Accident history: None I am selling because i want an s550 5.0. I have owned this car since September of 2006, and it has been garaged since that time. I daily drove it for several years before retiring it to a nice day only...

After getting everything up to date, and replacing a leaky pinion seal a new gremlin has appeared. So far this issue has only happened twice, and both times it only lasted about 1-2 minutes then the truck was running as smooth as could be. The first instance was after i filled up and started it...

2001 Lightning New Owner Questions - Updated with DTC questions! I just purchased a '01 L with 79k miles, and a few mods: 4# Lower pulley (MotoBlue brand) Is Motoblue any good or should i swap it out? Longtubes (unknown mfg), Bassani cat-back Cal-Tracs Air-raid cai w/k&n Due to the truck...

Well due to an unfortunate run in with some large debris in the roadway that was kicked into my Cobra's path i am in need of a new Transmission Crossmember, Exhaust, and also K member brace. Does anyone know where i can get one? I have searched online but turned up very little. Also it...

:lol: YouTube- Galactic Empire State of Mind Embedding is disabled for this video...

Monday i tried to start my car and it turned over like normal and acted like it was gonna start, but as soon as i let go of the key it just stopped. It hadn't quite got started so it didn't "die", and now it will not start. I have checked all fuses under the hood and inside the car and they...

I need new bolts for the rear LCAs. Where can i get these bolts they are obviously very heavy duty since they hold the LCAs to the chassis and axle. Do i need to get them from ford or can i find bolts of sufficient strength at a place like Ace Hardware? Also for those that have MM Adj LCAs...

83-04 Black Urethane Mustang Upper Strut Mount Bushing Kit at LRS - Same Day Shipping! Are these worth the money? Or are the factory ones good? I am looking to replace my crappy KYB struts with some Bilsteins and was curious if these would provide any benefit over the stock rubber ones...

I have a set of aluminum IMRC deletes i bought off here earlier this year. They have been sitting in my closet in the box they were shipped to me in for 6 months. There is nothing wrong with them, and they are in great shape. I have decided i would rather use composite deletes. $95 OBO +...

I have a set of Steeda Aluminum LCAs off of my 97 Cobra. They are in good condition except for one of the sway bar mounts has one of the mounting holes broken off(Shown clearly in pictures). These would work good if you weren't planning on running a stock swaybar or you weren't going to use...

I have my rear seats, insulation, and trunk lining stripped out for installation of a shock tower brace. On my drive to work this morning i noticed a loud rotational noise coming from the rear of the car that i have never heard before. It gets louder the faster i go, and if i put the windows...

I got MM subs this week, and a local guy said he can install them for me but he wants to jack my car up and do it on the ground. I was under the impression that you MUST install subs with the car on a muffler shop style lift so the weight is on the wheels. Is this correct? It doesn't make...

So i installed MM adjustable lower control arms to replace the aluminum steeda ones where the sway bar mount on the driver's side had broken. All went well until i had to remove the steeda uppers because they weren't allowing me to move the axle enough forward to get the axle bolt in on the MM...

So i have two friends that work for a daycare. The huge one's grandfather built a chain of them here and he runs this particular location. The kids were in on it and were used to distract my friend Josh the one that gets annihilated. They went to a moonbounce place for the kids to play around...

I have new in box, only opened to look at them, poly front spring isolators. I bought these to go on when i added the 03 front arms, already had them in :loser: $35 obo

Every once in a while when i start my car for the first time in the morning it will run really really rough and chug along for a couple minutes while i let it warm up. It will clear up after a couple minutes idling or if i start down the road it clears up even quicker. Plugs are less than 6...

I just bought these 2 weeks ago from a member on here Boostin'Mystic without even thinking that i have a reman motor in my car not the original 97 motor, and sure enough i have plastic/composite imrcs so im going to be using those to make deletes instead. I just opened the box to look at them...

awww damnit! rick rolled!

I am wanting to get an xcal but i dunno which i should get, and where i should get one from. I would like to get a custom tune loaded from wherever i buy it, so that i can have the rear o2's turned off and have a decent tune for the mods i have. Where do you guys recommend that i get one...

When an xcal 2 is unlocked what does it say when plugged into vehicle? Read Strategy SELECT to read Program Vehicle^ SEL to Begin Either of these, im trying to purchase one and i wanted to make certain it was unlocked but ive never used one before so i have no way to know. Thanks

Ok so there is a local kid claiming that his 4th gen prelude with a H22 pulls modded 05+ GT's no problem with these mods: greddy long tube headers. lsd transmission, full 3 inch exaust, different gear ratio. no power steering, cold air intake, pullies, gutted my car out. only thing in is...

Ok so after my fuel economy for the past couple months took a dump went from ~24 to 17 i decided to drive up to oreilly's and have my codes pulled. I had three codes P0420, P0430, and P1443. The first two didn't bother me since i just romped it the day before and i have an offroad pipe with...

My cobra is lowered about 1.25 - 1.50 in the front with the Eibach pro-kit springs. I am wanting to get some urethane endlinks, but im not sure which kit to get. There is one for mustangs that are lowered more than 1.75" inches in the front...

Ok so im piecing together my new Flywheel/clutch setup, and im wanting anyones opinions on the RPS clutches with the segmented design. Supposedly you can replace the segments if needed to down the line without having to get an entirely new flywheel. I was only able to find good things about...