Year: 1984
Make: Toyota
Model: Supra
Price: $1500
Mileage: 140000
Private or Dealer Listing: Private Listing
Location (State): IA
Color: Blue
Transmission: Manual
Drivetrain: Rear Wheel Drive
engine: 2.8 I6 5mge
For sale is a 1984 celiac supra that is ready to be swapped. The car is currently...
I built a sand rail last year with a 600cc r6 engine and built a chain drive rear end with a 1" double keyled 4140 chromoly shaft. I noticed the shaft is starting to twist and am now wishing I would have gone with a larger diameter shaft. Rather than re-machining hubs and starting from scratch I...
For sale is a used spec 2+ clutch disc and pressure plate. They have about 8-10k miles and are in great shape. No heat checking at all on the pressure plate. Only selling because I'm moving to a 26 spline setup.
(11" disc for tr-3650 / t56)
250$ shipped
I killed ny tr-3650 last weekend and need a good core to rebuild
Pm me if you have a 3650 or t-56 with bad synchros
(I'm currently located in cedar rapids iowa and will travel a couple hundred miles with cash if the price is right
Well I bought my 02 gt back in 2005 when it was bone stock. She first saw a 125 shot for a few years then 10 psi of boost through an 0n3performance turbo kit. Last weekend was the first nice day here in Iowa and got to go for a drive with some brand new bfg drag radials (295/35/18) and needless...
For sale is a pair of goodyear eagle f1 supercar tires . They are 285/40/18 and are mounted on a 18x10 wheel as seen in the picture. The only reason I'm selling es because I'm switching to a hoosier dr this spring. The first $300 takes them. Local pickup only and they are currently located in...
I'm posting this stuff for a friend who has decided to go a different route with his 68 coupe. Everything is new but may show a few scratches and bumps from being installed/unistalled during mock up.
MM3 front struts, hypercoil 475 spring coilover set, and new lower ford strut bolts $600...
New wheels and tires, never been driven on, just bolted to project car for mock up purposes. The wheels are black with a polished lip. (sorry about the dust)
2=18x9, w/ 275/35/18 nitto nt555 tires(new)
2=18x10, x/ 305/35/18 nitto nt555rII tires (new)
I will state again everything is new...
I getting desperate here trying to time my buddies truck. We pulled the distributor to replace a bad pickup coil but my dumb ass forgot to mark the rotor orientation before doing so. I figured I'd just have to find tdc and match up cyl #1 on the cap with the rotor. Apparently this is not so with...
So I just put some 285/40/18s on my rear 18x10s and they make the fronts look tiny in comparison. The fronts currently have a 255/35/18 and they are almost 2" shorter than my rears.
What sizes can I put in the front to make them match closer.
I was thinking 265/40/18, 275/35/18, 255/40/18...
I aquired a 2003 yamaha R6 motor and want to put it in my old dunebuggy.
I tried searching to see if I can run the serial number but have gotten mixed answers.
Is the motor traceable and is there a way to find history? Like a carfax website?
I'm tired of sweating my nuts off in rush hour traffic each day so I need to fix my a/c due to me burning a hole through the discharge line.
Please PM me with a price shipped (48310) if you have this laying around collecting dust
I have a 2002 gt with an on3performance turbo kit. The radiator fan stays on all of the time once the engine is up to temp. I was wondering if I have a problem or if my tuner did this to try to keep temps down with the turbo?
I do have a coolant reservoir delete made by mmr. Could this be the...
For sale is a used (10k miles) qa1 k member that works with any 96-04 mustang GT or Cobra. It comes with removeable spring perches if you want to run stock front suspension.
It does show wear from install/uninstall (minor chipping of paint) but is not damaged in any other way.
225.00...
stock 2v with on3 forward facing turbo kit at 9-9.5 psi.
10 degrees of timing at 11.2 a/f at 6k rpm.
My car is street tuned so I have no idea how close to edge of the stock bottom end I am.
catback is magnaflow flow through
My guess is 425 rwhp and somewhere around 475-500 tq
Got my car finally tuned with the new on3performance forward facing kit.
ground clearance is same as stock no joke.
Currently tuned with 10* of timing at 9-9.5psi and was blowing off 305/35/18 nt555r dr's in 3rd. (cold outside)
The car is stock accept for a flowmaster catback(flow through)
How...
I need some tires for my new 18x10's and want to see if anyone has got some laying around before I cough up 500 bucks for new ones.
295/35/18 or 315/30/18 preferably with at least 50% tread.
For sale is a 90mm maf plus the factory housing that I no longer need. I'm unsure of the mileage but I just took it out of my car today so it is 100% functional.
part # 1l3f-12b579-ab
afh90-02
4a20
60.00 shipped is all I'm asking
I'm taking a writing assessment for school and am not 100% sure what the first three steps are in the diagnostic procedure.
1.) Communicate with customer and verify concern with vehicle
2.) Test vehicle and verify that there is a malfunction or problem
3.) Identify the possible systems that...
For sale is the complete on3performance hot side turbo kit for a 99-04 gt.
Included:
38mm waste gate+gaskets and hardware (on3performance)
piping for exhaust manifolds to turbo
All v-band clamps
All piping from turbo to catback exhaust
The turbo is not included. Everything has been used...