Changing suspension plans and just going to some H&R springs. I Bought this kit, never installed it, just moved it from the original box to my "parts to install" box.
This is the kit I have: Mustang Coil-Over Kit, Front, Bilstein and MM Struts [MMCO-1] : Maximum Motorsports, the Latemodel...
I'm going a different direction with the car and am throwing my lower pulley kit on the market.
Update:
2# lower is sold.
Full kit still available with 4# lower ring only. $250 shipped to the lower 48. I will ship elsewhere if you pay the difference in shipping.
A friend of mine is looking to get a ported blower for his 04 cobra. Does anyone one have one for sale at the moment? He's ready to buy now, cash in hand. If we can't find anything, he'll just send his off for porting...so post up what you may have.
Will take a stage 3, 4, or 5 steig or a...
I tried searching and just am not finding what I would like to find out.
I am getting a PSR k-member in the next month or so and need to find out what length spring is the best to use for this setup? I talked with Maximum Motorsports on the spring rates, and they said they would recommend...
I bought this kit last year with plans to install but have never gotten around to it. Going with the fore triple hate setup so I no longer need this kit. It's brand new still in the original zip lock bag it was shipped in.
Looking for $45 shipped to the lower 48. I can have pics upon...
Ok, I am looking at tweaking my setup just a little bit to replace the clear upper pulley with a redfire or black one from billetflow to better flow with my under hood theme. I'd rather go to the 3.1 upper than the 3.4 upper...but actual boost numbers may dictate I go 3.4.
Currently I have a...
I did a search and found that a majority are just saying they are getting the tires with a few guys actually saying they have ordered a set or just had a set mounted. Not much in the way of actual reviews except a couple bolt on GT guys saying they hook.
I'm going to be ordering tires in a...
Ok, it appears I may have hurt something in the motor leaving a get together this past weekend. I left in my normal way, only this time the tires let go a little quicker than I expected and I did hit the rev limiter for a second or 2 in 3rd gear as the tires went up in smoke.
I'm at work so...
Ok, I have installed the billetflow throttle body on the 2.2 kb I just installed. I was fine with the idea of my idle hanging around 1000 when driving. However, here is what I am experiencing.
When driving around, the car will randomly pick an rpm to hang at. This seems to be dependent on how...
I need to find a stock PCV fitting. This is the fitting that connects the valve cover and the PCV hose. I had the JLT's and have gone back to the stock setup but can't seem to find my old stock fitting.
Price: $250 obo. We can discuss delivery/meetup half way kind of stuff if you are interested.
I'm tossing around the idea of selling off my 81 project and picking up a 68 fastback project or a 40's/50's F100 truck project. The title is clean and in hand so it can be made into a street car...
I am taking my JLT Pre-Filters off my car and pursuing another route since my valve covers are off. So, here are my 2 pre-filters up for sale.
$35 each or $55 for both...shipped.
I'm looking to pick up a black Billetflow or LFP single blade throttle body for an 03/04 cobra. It needs to be black to flow with my underhood theme.
Let me know what you have. Cash in hand ready to paypal.
I currently have a 6# lower ring on my car and that is not going to play nice with the stock 3" upper on the 2.2 KB. So, I'm looking to trade for or buy your 2#, possibly 4# metco lower ring. I'm willing to make a trade my 6 for your 2/4 as well.
Or....
I need to get a minimum 3.25" KB...
Ok, I want to get this out now for anyone that might be thinking about it. I've talked to one person on here so far that "may" be thinking of upgrading, so I thought I would get some of the rest of you thinking about it too.
I've decided that I'm not going to settle for a 2.4 and a 2.8H...
I have been looking to get a 2.2L KB for about 2 years now. I finally managed to get to the point to get one. However, just as they go up for sale, they seem to sell immediately now that I have the dough.
As such, I have the line on a 2.4L KB relatively local to me for $2k.
What I am...
My eaton is coming off the car tomorrow and the buyer didn't want the rings. So, now I'm selling the rings.
One is a 3.1 that I ran with my 6# lower since my swap. The other is a 2.93 I just bought about a month ago used. It has a couple flaws in it you will see when I get pics after...
Ok, I am putting the eaton up for sale. It is still on the car and it is still being driven periodically when I don't take the beater. If it sells, I will take it off the car and ship it out ASAP (no later than the weekend after I receive payment). It is in perfect working order.
Details...
Baton Rouge Christmas for the Kids Toy Delivery 12/20 @ 10:30 pm
Here is the original thread, but I wanted to start a new one with baton rouge in the title to get y'alls attention.
http://www.svtperformance.com/forums/south-160/544308-christmas-kids.html
We are meeting up at 10:30 at bass...
Well, first they go after Kocky, now it appears ford is after the ranger station...they want the domain AND $5000.
TRS is being attacked by Ford Motor Company! - The Ranger Station Forums
I have a feeling a lot more of these stories are going to start popping up.
I am going to take the K-member off my car to put the stocker back on so it is going up for sale.
It has been on the car about 5k miles now...I will know the condition and can get pics once I get it off.
It is coming off because with a vert, the front end just is not solid enough...and...
I have a 3.1 upper right now and am looking to pick up a 2.93. Is anyone out there looking for a 3.1" upper? Mine is redfire, in great shape, can get pics at request.
I'm looking to get the 2.93 as there is a whipple coupe in town talking shit and the 2.93 will put me at the same torque as...
For sale is my accufab plenum painted BBQ Flat black. This was stripped down to bare aluminum before painting black and give 3 coats of BBQ Black. It can easily be stripped back down for polishing if you so desire. It has 0 miles on it as it has been waiting for the BF TB to be released...
After waiting all this time to get this TB, unfortunately I have to sell it without even putting it on the car.
This has never been on the car. It has been out of the packaging to oooooh and ahhhh at...and can't be shipped out ASAP.
Unfortunately, my hard times are your gains. I will...