Search results

It's been a little challenging these days to get any support from the SCT pro racer forums. I was hoping to reach out to the SVT community and see if anyone with the SCT Pro Racer Package can give me some advice. Short story on the car: 2003 Cobra AMZ2 processor, 10.5:1 Teksid engine, Bullet...

Brand NEW Ford 3V oil pump with Boundary Billet oil pump gears. Never used, only opened for the pictures. The 3V pump flows more than the 2V and 4V pump and will bolt right up with no modification. $275

It’s been a long time coming but the car is finally done. Rather than flood this thread with info, I think most of you guys know where to find my build thread on ModFords. For those of you that don’t know, I built this car myself and do all of my own tuning. The hard work and long nights have...

Used this on my last build and it worked out great. No longer needed with my new set-up... No need to cut into your upper radiator hose to "T" in a cooling mod. This will accept a 5/8 heater hose and keeps things clean under the hood. I'm also including the stainless steel plug that replaces the...

Complete set of oem 96-98 cobra cams (intake and exhaust). I used these in my 03 cobra and as most of you know, the intake cams are worth a nice boost in HP across the board. The stock 03 cobra intake cams have a 184* duration while the 96-98 cobra cams have a 204* duration. These cams also...

Bought these wheels brand new from Weld. Selling only the fronts which are 17x4.5 with 1.7''BS and clear the 03-04 cobra brakes with no problems. No need for any spacers! Looking for $1250 plus shipping for the wheels, tires and center caps. Wheels are in excellent condition! Front...

I have a Lentec Strip Terminator AODE/4R70W forsale. This transmission has served me well and if it don't sell, i'll just end up keeping it. It comes with a 9.5" non lock-up Lentec converter that was gone through at FTI. It flashes to 5200 RPM in my car and works flawlessly on track (Trans-brake...

A LOT of companies make billet oil pump gears and they've become pretty expensive. I think there a MUST HAVE especially if your rebuilding an engine or have the front timing cover off... I'm currently building my own Teksid block with a custom set of billet pistons so I wanted to also replace...

Set of 8 Manley H beam rods out of my engine. Rods are in perfect condition and no issues at all. 7 of the rods are the oem rods from my original engine. I had to order and replace one rod during my last engine build because a bolt was stuck in the main cap. The replacement rod came directly...

Manley Platinum series pistons for a .020 over bore (3.572), -6.5cc dish. The PN in 594320C-8 and they can be used in a 2V, 3V or 4V. I used these in my 03 Cobra with stock rods, stock crank and stock heads and my compression ratio was right at 9.8:1. I went 9.29 in the 1/4 mile with these...

Brand new, in the box! Only opened to take these pictures. Manley H beams with ARP 2000 rod bolts. Comes with the original build specs and weight of each rod. Direct replacement for the 03-04 Cobra or perfect for a new motor build. I planned on using them but there no longer needed. Purchased...

I know a lot of us Cobra guys have done this in the past for various reasons. Most of us "racers" do it to shave weight since the ABS pump is quite heavy. There's a few ways to accomplish this to end up with the same results and a few companies machine some really nice pieces for a "plug-n-play"...

The stock pulley tensioner on the 03-04 Cobra has been known to flex under extreme loads which can lead to belt slippage. The more power/boost you make, the more the tensioner will flex towards the front of the car. The guys at Metco Motorsports have this really nice CNC machined brace that...

A pulley swap on our 03-04 Cobra is pretty straight forward. There’s a lot of options when it comes to auxiliary idlers and pulley bridge idlers and any replacement over the stockers is a step in the right direction. The guys at METCO Motorsports make some really high end stuff. I wanted to...

Recently, I parted ways with my GEN 1 TVS with an Accufab TB and elbow and my JLT “high boost” intake. It proved to be a great blower and my best pass with it was a 9.29 letting out shortly after the 1/8 mile. I had plans to completely change the set-up in the car but I ended up going with a GEN...

79-04 Viking rear coilovers for SRA Only. Brand new, in the box. Double adjustable Viking shocks have 19 positions of compression and 19 positions of rebound adjustment for 361 different valving combinations. These bolt directly in the stock location. No cutting, welding or modifying. $580...

Post them up. Heres a few shots of my car. Thanks to all of my friends who helped out over the weekend and thanks to SVTP for taking some good pics!!!!

I'm in the process of changing my IC tank/set-up and I have a like new Meziere intercooler pump. It's only 3 months old , looks brand new and works like new. The pump cost $230 from Lethal and then the 3/4'' o-ring barb fittings were another $30. I also have the mounting hardware and wire...

I have an LFP Dual Pass Heat Exchanger out of my 2003 Cobra. Works great and looks great. Selling with or without the brackets but I will NOT sell the brackets separate. Just the HE new cost $299 Asking $200 for just the heat exchanger or $275 with the brackets.

OEM Intercooler pump out of my 03 Cobra. $85 shipped.

I have 2 Walbro 465 fuel pumps forsale. Both pumps were purchased new from Lethal and used on my E85 Cobra with the older style DX fuel hat. I had to modify the pump fitting for it to work with the older style fuel hat (see picture). I've recently installed a newer hat with pumps so I don't need...

Looking to buy a Boost a Pump. Let me know what you have. I don't necessarily need the 40amp BAP. I really just need a 20 amp BAP to drive my IC Pump

I have a BARELY used, complete UPR coilover set-up off my SRA 03 Cobra. The shocks and coilovers are less than 6 months old and have upgraded polyurethane bushings in the lower shocks. The shocks are Strange 10 way adjustables and I wont split the set up . I pulled consistent 1.3x 60 foot times...

LFP Dual Pass heat exchanger off my 03 Cobra in great shape. I will sell the whole set-up as seen in the pictures with the original mounting brackets, or, I will sell JUST the heat exchanger by itself. Asking $300 with brackets, $250 without brackets (Heat Exchanger only). 44

I'm switching to a Meziere set-up so I have 2 03-04 Cobra intercooler pumps forsale. one is a stock OEM pump and the other is a BOSH OE replacement. Both work perfect and have no issues what so ever. Asking $100 shipped for each.