Since we only get summer blend around here for only a couple months I wanted to make sure I had enough fuel to last me the early spring until the good stuff comes back. I filled my plastic 55 gallon drums to the brim and the caps are tightly sealed.
I'm wondering if I should put any additive...
Finally got the new blower and 8 rib kit done and on, just gotta mount the new intercooler and do the fuel system and she's ready for the dyno. Here's a quick video of the first start up
http://www.hollowpointracing.net/showpost.php?p=51650&postcount=33
Technically not a terminator lol, but we took my buddy's single turbo 01 cobra to get tuned the other day, it put down 773rwhp / 636rwtq at 23 psi, on pump gas 93 octane, through an auto, on a Mustang Dyno
Here's a link to the vids and dyno sheet: Turbo cobra on the dyno - Hollow Point Racing
We took my buddy's single turbo 01 cobra to get tuned the other day, it put down 773rwhp / 636rwtq at 23 psi, on pump gas 93 octane, through an auto, on a Mustang Dyno
Here's a link to the vids and dyno sheet: Turbo cobra on the dyno - Hollow Point Racing
I've got a set of Moser 31 Spline axles, maybe 1000 miles on them. I'm swapping to the shorter early sn95 housing and won't be able to use them. Come with studs and ABS rings. $200.00
Like the title says i've got an 03 cobra fuel tank, hat, and pumps for sale. PPRV delete already done to it, but it does need a new level sending unit. Going return style so I won't need this stuff.
Came out of a low mileage wrecked cobra that got parted out.
I paid $450 for the setup, put...
Like the title says i've got an 03 cobra fuel tank, hat, and pumps for sale. PPRV delete already done to it, but it does need a new level sending unit. Going return style so I won't need this stuff.
Came out of a low mileage wrecked cobra that got parted out.
I paid $450 for the setup, put...
I have for sale a set of (8) RC Engineering 42lbs injectors. These go for around 90 bucks each, or around $700 a set new.
I also have a PMAS 3" Pro Tube blow-thru MAF calibrated for the 42's. Purchased from JD's performance for $270 new.
I'd like to get $550 shipped for the injectors and...
I have for sale a set of (8) RC Engineering 42lbs injectors. These go for around 90 bucks each, or around $700 a set new.
I also have a PMAS 3" Pro Tube blow-thru MAF calibrated for the 42's. Purchased from JD's performance for $270 new.
I'd like to get $500 shipped for the injectors and...
I have a very complete 2V PI swap for sale,
heads and intake are off an 02 GT with right
around 50K miles, everything is in great
shape. Includes PI intake, throttle body/
plenum, stock heads and cams, GT passenger
side oil fill valve covers. Also have a bunch of
other random misc parts I...
I've got a set of Jegs 1" slip on billet wheel
spacers that fit 5 lug 4.25, 4.5, and 4.75 bolt
patterns. These are required to run most 3.5"
skinnies up front with cobra brakes.
At the time I bought them they were $100 +
shipping, they are brand new and have only
been used to test fit a...
I've got a set of Jegs 1" slip on billet wheel
spacers that fit 5 lug 4.25, 4.5, and 4.75 bolt
patterns. These are required to run most 3.5"
skinnies up front with cobra brakes.
At the time I bought them they were $100 +
shipping, they are brand new and have only
been used to test fit a...
As the title states in looking for a shortblock from an 03/04 cobra. Willing to pick up if within reasonable distance, which would be preferred to save on shipping, but I'm pretty much open to whatever.
Let me know what you've got, thanks!
Did the PPRV delete today, before dropping everything back into the tank I noticed the "big" electron board I believe its called, just kinda floating around inside the plastic housing. The "small" one on the end of the yellow wire is still intact and looks like its in the right spot.
So...
Having another weekly meet tonight, Wendy's on Rte. 20 in Marlboro, just minutes off 495, for around 7pm.
Two weeks ago we had probably 15 cars and last week probably 20....all are welcome, hope to see some more people there tonight.