Search results

I was wondering if anyone knew or had the schematics that show where the entirety of the Mach 460 system in SN95 cars is grounded. The well-known schematics have two grounds that come off the radio and CD player HU's at splice's S208 and S209 with wire colors Black and Black/Lgt Green...

Has anyone had this issue with the trim ring around the ignition cylinder on their car? I have been living in an extremely hot environment for the past two years here in California and it seems the ring has dry rotted and eventually just chipped away. Does anyone know what to do about this...

I posted this earlier in the 96-98 forum, but and I figured maybe some of you guys know. I've been researching this for a coupe of days now without a clear answer. I was wanting to go with a set of Brembo quad pistons such as the one's from the discontinued M2300-X the Focus SVT kit. As I...

I've been researching this for a coupe of day now without a clear answer. I was wanting to go with a set of Brembo quad pistons such as the one's from the discontinued M2300-X the Focus SVT kit. As I understand it, the Brembo Gran Turismo kits are supposedly the same, but I was wanting to be...

Hey guys, I was wondering if there's anyone out there that has a Cobra upper intake they're wanting to rid themselves of. I've got the lower, and was wondering what just the upper would run. I don't want an Explorer intake, but would be also interested in the FRPP GT40 intake upper as well...

I would like a pair of Terminator struts. I would prefer vert struts, but coupe is just fine too. I would prefer to buy a set that doesn't have more than 30-35k miles as well, but that is also negotiable. Thanks!:rockon:

I've searched around the forum and haven't quite found a suitable answer to this. My '11 has developed this idle issue recently around a month ago. It will dip to around 450-500rpm and almost stall at a complete stop and the computer will compensate and kick the idle back up to where it...

I don't have a Terminator, but I plan on installing the '03-04 Cobra front LCAs on my '86GT during my 5-lug conversion. I need to know what is considered a 'quality' urethane bushing. Perhaps Energy Suspension? I also need to know where to get the attaching hardware since the original...

Hey all. I was wondering if fellow CS owners have what I see as a premature wear issue of the GT/CS logo on the seat backs. My seats have 17k miles on it and I do take care of the leather, going so far as to put a cover over the seats when I saw the wear begin around 11k miles. My car is...

This install is 90% done. I tapped off the rear speaker positive and negatives with my friend and he helped me with the measurements, drilling, cutting as well as overall design of the amp/cap/xover rack. The LOC mount was somewhat of a last minute addition, but we found a place for it and it...

Let me begin by saying that I have the speaker wiring diagrams for the Shaker and I'm an electrician by trade, but this HU has got me stumped. I've been trying to get the Shelby Kicker speakers/8's in, run new wires to the back and use a ZXSUM8 line out converter/summer, along with a ZX350...

To start off, I've got Shaker 500 with the NAV package on my 2011. I'm trying to wire up a Kicker 4-channel. My problem is finding a pre-amp full range signal.:rolling: I've been studying the 2011 Mustang online manual that's out there and I've ran into a snag as to where to tap the RCA's...

Anyone live in the Hampton Roads area who know a reputable auto body shop around? Some jackhole decided to not use his mirrors/rear glass/common sense and just backed out of a space in a parking lot right into my rear quarter with an old pos Silverado while I was at a complete stop behind...

I've been searching for a GT500 mudflap install how to and haven't turned up anything. Does such a how-to exist? Or does anyone here want to chime in and post how to? Thanks! :D

Recently I purchased two pairs of the Shelby/Kicker 6x8's and the pair of 8'' subs for the doors. I did the swap in two phases, the first was last weekend and the second today. I did the doors last weekend and the rears today. The doors, especially the 8's sounded really good with thump...

I've been trying to search to find a how-to on this subject. The closest thing I've seen is on mustangforums.com with an '07 GT. I've a pair of the Shelby/Kicker speakers to put in and they didn't provide me with any instructions. I guess it was asking too much of Ford to have changed the...

Anyone know where I can get the authentic color, or something close to it anyway, of the charcoal gray carpet found in the '11-12 Mustangs? I was just wanting to buy a roll of it if possible. Can anyone chime in on this one? I was needing some for a project.

As the title says, does anyone have the part number for the GT500's pedal assembly? I can't find it anywhere.:shrug:

My mods are listed in my signature. I was wondering what I can do with my current setup to help it absorb more road inconsistencies such as pot holes and speed bumps that shouldn't be in places such as... oh... I don't know; like a major highway such as I-64 in Hampton Roads. Needless to say...

As the title says, I'm looking for a pair of 03-04 Cobra/Mach 1 lower control arms in good shape. I would prefer them minus balljoints and LCA bushings, but if they are there thats okay too. All reasonable offers considered and shipping would be to 23503. Thanks!

Over the last three months it's been necessary for me to get an alignment due to whats been a reoccurring issue with my car wanting to pull to the left while driving. After looking at the last three alignments I've had one thing stands out and that's the Total Toe In. The last time I took the...

Since I've had to the Hampton area in VA I've noticed a huge difference in how my car rides since I've done the suspension mods in my signature below. My issue is the fact that I bottom out on these roads at even low speeds and the overall quality oft he roads around here are complete garbage...

I can't seem to find it in search, but can one use a 99-01 coolant crossover tube on a 96-98 cobra engine? I know the 99+ has the sensor on it, but as long as it's present, but not doing anything except sitting there, can the 99+ tube be used? Thanks

Ok 1st Question: Where's a reliable place in the Hampton Roads VA area to get the '03 lower steering shaft put in and get an alignment? I don't want to take my 96 to just anybody around here. A lot of people are out to screw us military guys. And 2nd Question: What kind of primer...

Does any of you know if the Mach MP3 HU has an internal amp forthe front channel like the 6CD Mach HU? Thanks