Search results

Looking for a 2014 GT500. Must have SVT, track and electronic package. Must have Recaro seats. Does not have to have glass top. Mods are ok, mileage does not matter. I don’t need a 2 k mile car. Color preference is red w/black strip Would consider other color but would like to stay away from...

Ok, I have an 03 cobra with a 2.3 Whipple, Running stock fuel lines and 60lbs injectors. I have some gauges that are not showing the correct information. I did not install the gauges and I don’t know how old the gauges are but what I have is a standalone Speedhut digital fuel pressure gauge...

I have a New McLeod 26 spline extreme clutch kit for sale. Sold shipped to the lower 48. Used McLeod flywheel ARP bolts. $165.00 New Ford pilot bearing. Sold New Ford throw out bearing. Sold New shim kit, SOLD Paypal fees not included, they will need to be added to all sales. Thanks All...

Looking for a descent stock heat exchange bracket. Mine has been bent all up. let me know what you have, does not have to be in perfect shaft paint and rust wise, would just like to have it straight. You can text me at 828-817-4769. Thanks

Looking for a McLeod RXT clutch for my 03 cobra, Let me know what you have. you can text me @ 828-817-4769 Thanks

Hello and first off thanks for your help! I have a garden tub that I have removed and started to build a walk-in shower. I have the walls down to studs, I have 1/2" water lines running to the original bath hot/cold, and the previous owner ran a rain shower, with 3/4" water lines. What I...

I am going to be spending a long weekend in the Dallas Arlington area picking up a truck Aug 11-14. What would you recommend to a NC person to do? I see Six Flags, Cowboys stadium close by and if the Rangers are playing I may take in a game. I don't have a place to stay yet, so any...

I have a set of stock cams and springs for sale, They have 48,000 miles on them. There is nothing wrong with the cams or the springs. I went with head studs and replaced the cams and springs. Asking $200.00 for all 4 cams and all springs, I will work with you on shipping if needed. Paypal...

I have decided to sell my cobra, I an listing this at work so I will have to give the mileage and photos later this afternoon. I do know the mileage is below 50,000 but more than 40,000. The car is black with black int. Mods include: 2.9 Whipple 100 lbs injectors bosch E85 tune...

A little back story, I installed a 2.9, Bosch 105's and new pump to Run E-85. When I got everything installed and ready to be dynode, we had a misfire. So I replaced all the plugs and proceeded with the tune. The car put down 709 to the wheel. Now I can hear a tick coming from the passenger...

looking for a stock lower pulley for a 03-04 cobra. Let me know what you have and how much. Thanks you can text me at 828-817-4769

OK, from my last post I stated the pulley was rubbing on the balancer, So last night I pulled my lower pulley cage. While I was removing the bolts I noticed that the cage was backing away from the balancer, before I got the main bolt loose. So either I installed it wrong or I am missing some...

I had a 4lbs lower pulley on my car and I removed it when I installed my Whipple. I put a stock unit back on, I noticed that when I installed it, it was hitting the balancer. Know that I have turned the motor over I did hear rubbing and I saw sparks. I do believe the pulley is still hitting...

I have a question, has any one had the snub idler bolt hole stip out? I stripped mine and now i have to either get a longer bolt same thread size or drill and tap a bigger size? any suggestions? Thanks

I have a First Gen (i think) Carbon Fiber Intake. It has a small crack in the underside where it looks like it rested against the shock tower. I do not have a sheild for this set up. I do not know how many miles are on it either. Price is $150.00 or best offer. Let me know if you have any...

I have a first gen JLT cold air intake, It has between 4-6k miles on it. THe filter is dirty but should clean up good. It will come with the shield. Price is $150.00 or best offer. I can text more photos if wanted. 828-817-4769

I have a Posi port eaton for sale, The port # is 33. I made 561 RWHP and 535 RWT. I have had this blower for about 4 years and i got it from this site. I have put between 6-8,000 miles on it. I do not know how many miles were on it when i got it. The blower will come with a 2.76 pullie I am...

I have a four door best top cover for sale. It is for a four door wrangler. It is gray and it will come with the bag. If interested I can text photos. I am asking 125 shipped to the lower 48. 828-817-4768

I am looking for a whipple 3" pulley, I have paypal ready. Text me what you have available. Thanks 828-817-4769

I have an -8 an feed line that I got from Lethal about 5 years ago. The line is black and has the fiber on the outside. I have the same thing for my return line. I have been told that the E-85 will eat my fuel line. So I went out and bought a gallon of E-85 and cut some of the hose I had...

I am looking for some help in routing my 4 gauge through the fire wall. What are some of my options? where can i run the wire. Thanks

I have a Fore fuel hat with two Walbro 255 pumps. Also a Deutsch electrical connector and a FPDM bypass. The FPDM bypass was purchased from Black306. The bypass will come with everything you see. All you will need to do is run a wire from the battery to the back of the car. The AN fittings...

I have a Metco 4lbs lower complete unit for sale. photos is below. Unit is used but in good shape. Sale price is $350.00 OBO, plus shipping and Paypal fees. Best way to get in-touch with me is by text 828-817-4769. I can send more photos if needed. Thanks

i have a brand new 10th anniversary shift knob and a used brake handle. The stiching in the clothe on the bottom of the brake handle has come lose in one spot. I can send an upclose photo if anyone is interested. I would like $100.00 each shipped, You cover paypal fees...

So, I am upgrading to a bigger blower and going E85. i am selling off some items that i dont need anymore. All prices are best offer and does not including shipping or paypal fees. If you have any questions please feel free to ask. You can get intouch with me by text @ 828-817-4769 or PM me...