Search results

Anyone know of a trustworthy source for paintless dent repair? Backing the car in the garage this morning and the kids heavy ass plastic nerf basketball hoop decided to fall apon my driver side rear quarter panel after a so nicely planned gust of wind from mother nature..... No scratches and...

I have a GT pinion flange that was on my solid when I bought it. This was not used. $15 plus shipping.

I have a stock inner CV joint from my old IRS before the solid. It has approximately 11K miles. $75/OBO plus shipping.

I have my used 26 spline DFX setup for sale. It has approximately 5K miles on it with some racing. I took it out and replaced it because I had a vibration in the clutch pedal which turned out to be a bent input shaft and NOT the clutch. I replaced it because I had a new clutch already in...

First and foremost, thanks to Kevin for the lift, storage of my car for a week and of course the help of getting my car on the road. Everything went pretty much smooth as can be really. Got the input shaft replaced and the tranny refreshed a bit. Installed the Spec 3+ with steel flywheel...

Gotta thank Kevin for helping me out and letting me use his lift. :bowdown: :rockon: :beer: What I and everyone else thought was a warped PP or flywheel turned out to be a bent/twisted input shaft! It was in the back of my mind that it could be a bent shaft, but I thought I would have more...

Think it is time for a new clutch setup? What the hell could it be? It is getting violent. I adusted it and it does not matter what I do. I put a tad of pressure on it and then it stops. What do you guys think?

Guys with solid axles and aftermarket control arms. Do your sway bars fit? I have the Mach sway bar with Metco lower control arms and it is not even close to fitting. I am guessing that is the cost for having better, thicker control arms? Is there any options out there?

Put the car together tonight. Still need to put the rear interior in, but I have to notch out the back seat frame because of the upper control arm torque box reinforcements. Took my time and torqued everything to spec. Only zip tied the brake lines, e-brake and abs. I will address that...

Gotta thank the guys that helped me out. Gotti, Mike, Tom and Tim. Lots 'o' shit to do and got lots 'o' shit done. Installed the torque box reinforcements, switched pinion flanges (DTS messed up), installed caliper brackets, and got the solid in place. All in all the job was not that bad...

Looking at installing my solid on Saturday June 23rd. If anyone is interested in helping out let me know. Probably start around 10ish in the morning. Should not take too long. I am going to try to get the torque box reinforcements installed before hand if I can. Other than that it should...

Picked it up from DTS. Gotta say that Adam @ DTS is awesome to work with. Explained some stuff to me and chatted for a few. Anyways..here are some pics...

Ok folks, I sent the shafts back to DSS to get upgraded to the newest design of hub. So basically you will have brand new hubs that are the new style and shafts that have 3000 miles on them...basically brand new level 5's. I have retained the inner boot, but you will have to use your inner CV...

Ok folks, I sent the shafts back to DSS to get upgraded to the newest design of hub. So basically you will have brand new hubs that are the new style and shafts that have 3000 miles on them...basically brand new level 5's. I have retained the inner boot, but you will have to use your inner CV...

Pulling this Saturday. Anyone wanna lend a hand, PM me. I am going to start around 10:00 am. Should not take too long at all...pretty easy to do.

-------------------------------------------------------------------------------- I have the car on jackstands now because of a bad shock, so I can have the IRS out and parts in hand fairly quickly. All prices are negotiable...I am easy to work with. The Entire Stock IRS has approximately...

-------------------------------------------------------------------------------- I have the car on jackstands now because of a bad shock, so I can have the IRS out and parts in hand fairly quickly. All prices are negotiable...I am easy to work with. MCT guys, we can work on pricing. The...

Seriously considering a SRA swap out. What do you guys think I can get for my IRS? Level 5's, BF Brace, QA1 12-Way Adjustable shocks, PHP Toe Link bars, 1/2 coil cut stock springs. MAC 2.5" stainless catback. Approx. 11,000 miles on the IRS, 2,000 miles on the catback. What's it worth...

Put insurance back on her and took her out for the first time today. Changed the oil and to my surprise...I see some shiny flecks in the oil when the sun hit the pan as I was draining the pan after the change. Not sure what to think at this point. There was no "metal" that I could actually...

I have 2 for tomorrow's day game that I can't use. Left field, section 148, row g, seats 1&2. $28 for them. It is the ring ceremony. If you want them let me know. I have them on hand or can email them to you.

Picked up a 42" Sharp Aquos LCD today from Best Buy for my basement when I finish it. Ended up that they had one left and it was an open box from some douche that decided that they wanted a bigger one after the installers mounted it to their wall. Everything is in tact and looks fine. Regular...

Mafia Battle. I thought it was kinda stupid at first, but I am addicted. Come join our SVTP gang called The Elite (Mention you are from SVTP in the message). Pretty cool game to waste time. http://www.mafiabattle.net/index.php?r=2455

Yep...once again. Don't know when, but they did. Their website:http://www.driveshaftshop.com/MUSTANGC.V..ivnu

Well, I enjoy construction/carpentry work as a hobby kinda. So, I decided to start yet another project. Since the family is growing and we are in desperate need of room to get these damn kids toys out from every room in our main living space I decided to gut the nasty finished basement we...

We are going to make the call in the morning between 7:00AM and 8:00AM. Check back here for the official word if it will be cancelled or not.