Search results

  1. 0

    Twin Turbo Svt Cobra F/S

    Here is my link http://atlanta.craigslist.org/nat/cto/4658379594.html
  2. 0

    Billet Specialties w/ New M/T's all around

    Maybe 5 passes. Perfect condition includes lugs. This setup is over $2000, asking $1200 firm. YOU pay shipping from 30183 Call or text Damon 7708615471
  3. 0

    SDR Nov. 17....yall bring it...all invited

    Copyright © MuscleCar-Evolution.com 2007-2012 All Rights Reserved **KIDS UNDER 12 ARE ADMITTED FREE WITH ADULT**
  4. 0

    99-04 4v mustang/cobra garage sale

    Got some chrome (not so much any more) BBK L/T's for $200, a Metco Lower pulley kit with several lower pullies ($300) and a NX wet kit(used) with Nos Progressive controller(new never installed)...also comes with bottle, lines, brackets and warmer ($900)... email me...It's quicker...
  5. 0

    3.4 whipple, Accufab T/B and Custom Fore Fuel Rails.....

    8 passes, all like new. Comes with 3" and 3.5 Pulley's. Blower alone is $4500 which is bottom dollar for all this shit...
  6. 0

    3.4 whipple, Accufab T/B and Custom Fore Fuel Rails.....

    8 passes, all like new. Comes with 3" and 3.5 Pulley's. Blower alone is $4500 which is bottom dollar for all this shit...
  7. 0

    3.4 whipple, Accufab T/B and Custom Fore Fuel Rails.....

    8 passes, all like new. Comes with 3" and 3.5 Pulley's. Blower alone is $4500 which is bottom dollar for all this shit...
  8. 0

    4v whippled 3.4 with all the goodies

    01 teskit aluminum block bored .20. Manley flat top pistons 9.8/1 compression, manley H rods, arp 2000 bolts throughout, arp head studs, complete precision bearing kit, Wipple 3.4 w/ bohemouth inlet, custom Fore fuel rails, Metco lower kit with 3 pullies, Nex Wet kit, 92mm tb has maybe 300 miles...
  9. 0

    Super Car Pumps and dual fpdm f/s

    Still in the car but can have out immediately. Less than 200 miles on the setup and will support over 800hp. This is the Lethal Performance kit $700 shipped don't hit me up here just email me. [email protected]
  10. 0

    Metco 8lb lower and 2lb lower for sale

    This is for the Pulley's ONLY. Retail for $129 each plus shipping. Will ship for $100 each. Both in excellent condition. The 2lb has only made 2 pulls on the dyno.
  11. 0

    Modded TBSS for sale.

    I don't need it anymore. This is our "family car" and the kids are grown up and gone. Here is our post on MCE:beer: Most of you have seen it, 68K miles, tires (265/50/20) have less than 500 miles on them (265/50/20 x 4), cloth interior with SS emblem, sunroof, 6 disc changer, rear...
  12. 0

    Mustang/Cobra stuff for sale

    $700 obo Hood for $100....needs repainted but no dents The best shifting T3650 but needs input shaft....$150 Wheels and tires $700...tires have less than 1/3 use!! LakeWood 70/30 with about 20 passes on them Free to a good home Weld Lites with plenty of life on the...
  13. 0

    Finally got my 10.9

    This is leaving at idle. Got plenty left in it with the transbrake when i get it fixed and the new converter so it will hold some nitrous. It only makes 35rwhp on a 75 shot right now. YouTube - MCE 2010 Damon's (01laser) 10.95 Nov 20 2010
  14. 0

    01 Cobra Seats for sale and Mach rear box

    $800 plus shipping from 30183. All seats and the Mach box with amps and wiring harness
  15. 0

    2000R y2k wheels w/ tires

    Cobra R wheels for sale It's the ones i used on the skreet. 10.5 rears with 9.5 fronts. No curb rash. Rear tires are Nitto 555's(315/35/17) (not d/r) with MAYBE 300 miles on them. The fronts are Michelin Pilot Sports (255/35/17) with MAYBE 1000 miles. $800 firm with lug nuts
  16. 0

    selling some transmission components

    My area code is 30024 so you can figure shipping. Spec 3 with 6 passes and 800 miles $200 New steel f/w with the same shit....$50 Pro. 5.0 shifter.....$100 Stock 3650 that took one hell of a beating but shifted like butter....needs input shaft $200
  17. 0

    Tremec 3650's

    I got 2 of them for sale. Both shift good but need input shafts. 1 is Promotion built with a pro 5.0 shifter....maybe 1000 miles on it.....$600 obo 1 is stock but went well with 500rwhp $400 You pay shipping on either....my zip is 30024
  18. 0

    Upgraded fuel pumps.....Tune Now???

    So i put dual cobra pumps in this weekend and the car idles fine and runs rough under a load. I never got on it because i couldn't but sitting still it will rev clean. Do you have to get a retune after upgrading pumps? Right now i have 39lb inj., bap, and the dual cobra pumps. I was running 1...
  19. 0

    Spring Bash April 25th-26th....Here's your OFFICIAL invite!!!!

    WELL IT'S OFFICIAL April 25th and 26th, 2009 Musclecar-Evolution will host it's first 2 day event at Silver Dollar Raceway. This event will be much different than the last ones. The track has agreed to let us camp out and race for 2 days. We will section off time for different...
  20. 0

    Musclecar-evolution 1/4 mile saturday

    What: 1/4 Mile Drag Racing When: November 22nd 2008, 10am-5pm Where: Silver Dollar Raceway -- Reynolds, GA www.silverdollarraceway.com Who: EVERYONE & ANYONE Pricing: $10 @ Gate $20 to Race This is the 2nd Annual event for November. Come out to watch or come and race. All...
  21. 0

    Musclecar-Evolution Mnt. Cruise Vid..

    This was taken from my car on Sun. mountain cruise....i'd say the Laser isn't limited to the drag strip...:banana: http://tinypic.com/player.php?v=2cde6w6&s=4
  22. 0

    Mickey Thompsons for sale..

    I have a pair of ET Streets (not the radial) 28-12.5 x 15 with 3 passes on them and a pair of ET Drags 28--10.5 x 15 with 9 passes on them. $350 plus shipping. If you just want the Streets is $300 plus shipping and i'm not selling the Drags by them self. Basically you get them all for $350 plus...
  23. 0

    Replacing the 460 head unit??????"

    i was wondering if any of you have done it and hardwired the amps off an aftermarket reciever. I've got the install done but i'm getting nothing but highs through the speakers. I also didn't buy a harness for the amp integration because i didn't know i needed one....Please help me get my sound...
  24. 0

    SDR next Sunday..March 30

    It's that time again...plenty of runs and lots of fun....:banana: http://www.musclecar-evolution.com/forums/showthread.php?t=4142
  25. 0

    Women Driven 03 vert for sale...

    My wife has an 03 vert with 27xxx miles on it. 2.7 pulley, basani x pipe, 6pnt roll cage, light bar/roll bar, tuned by Tim Barth at MPH.....465rwhp/480rwtq...new nitto 555zr's all the way around...mint condition... Located in Ga. pm me with any interest...please no low balling....

Top