Purchased some land earlier this year and I really want to go ahead and start getting a house built. So, the Boss has to go.
I am the original owner and I purchased it with both options (recaros/torsen, car cover/floor mats) in August of last year (2012). It currently has 10,3xx miles on it...
I am thinking about lowering my Boss and complimenting it with a few other suspension items. I just don't know if I should stick with Ford Racing or go with one of the many aftermarket companies.
What made you pick what you have?
Im thinking:
FR P or k Springs
FR LCAs
FR Panhard bar...
Right now I am running the 3.0 pulley on my 2.3 Whipple.
I am running 93 octane and making 569hp/517torque SAE. My Autometer boost gauge reads 16psi.
Will the 2.75 pulley be ok to run with 93 octane? Going by the boost chart the 2.75 is for 19lbs.
Theoretically since the 3.0 I have now is for...
Before I spend big money on clutch replacement, I would like to know if this is what is causing my problem.
Got into a friendly race and 1-3 shifts were fine. Once I tried to shift into 4th gear, it would not let me. No matter what I did. After coasting for a bit I was able to put it into gear...
Stock intake tube and MAF with a steeda filter and shroud. Shroud is cut to fit around a larger reservoir. $75 Shipped
90mm maf housing that came with a sct3000. $60 shipped
The girlfriend came home with this yesterday. A 2008 GT/CS with 47k miles. :dw:
It has the following mods on it.
JLT Cold Air
Longtubes (brand unknown)
offroad H
Flowmaster mufflers
GT500 Rims
Hurst shifter
Cams (Brenspeed Detroit Rocker Naturally Aspirated Mustang GT 2005-2010...
Are you whipple 2.3 guys posting numbers in STD or SAE?
Just trying to see where mine stands.
my uncorrected numbers (std) were 581hp/528torque. Corrected (sae) was much lower at 569/518.
My mods:
Whipple 2.3 with 3.0 pulley (shows 16lbs on Autometer boost gauge)
Bassani offroad x
bassani...
And I am a little disappointed with the results.
'03 Cobra
Whipple 2.3 (3.5 pulley)
EGR delete
60lb injectors
KB BAP
JLT High boost intake
SCT3000
Bassani offroad X
Bassani Catback
Made 505hp and 457 torque. :lol1:
The tuner said he was losing spark after 4k rpms. He couldnt get...
Or is my buddy ****ed?
My friend had a perfectly good running 04 Mach 1 with 46k miles. It had the usual bolt ons and was running low 13s@108-109 on street tires.
He then wanted more power so he bought everything for an eaton swap.
Took it to a shop to get installed and a custom tune...
Buddy got an eaton swap Mach tuned and dynoed today.
415 RWHP & 422 Torque
I was hoping for easy 450 rwhp. He has a 4lb lower pulley on it as well (stock upper). Running 12lbs of boost, the guy tried to add timing but the car didn't take well to it. Not sure in the final number on the...
So that is what my court summons reads.
Everyone on my street with dogs received the same letter today.
I have been at this location for 5+ years with the same dog (bulldog terrier) and have never had a problem before. I keep her inside at night as well. She doesn't even bark that often...
Installed the whipple last week and started it for the first time today.
When running it makes a VERY high pitch sound and it doesn't stop. I rev it a little and it is still there.
I took a vid of it on my iPhone. It only lasts a few second in the vid though. I have no idea why the iPhone...
Installed a whipple and supporting mods last week. Having it towed to get tuned tomorrow.
The car is in the garage and I need to back it out and turn it around. Will it be ok to start the car and back it out and turn it around with no tune/tuner?
Also would like to see if I did everything...
Ok, I have the whipple pretty much installed.
Only thing left is these vacuum lines. How do I get this lines to the back of the whipple? The eaton had a spot directly by the lines....
Anybody running that set up?
How is the housing holding up?
Want to get the lights to match the headlights, but worried about the housing melting like the websites say.
Been doing a lot of reading and I can't seem to find a complete list of mods/supporting mods for my goals. I would love 600-650 rwhp.
This is basically what I have read. Anything else I need?
Whipple 2.3
BAP
SCT BA2600 or BA3000 (which one?)
60lb injectors
offroad x
catback (already...
Here is a website selling them
2003-2004 Mustang Cobra Ford Racing Pulley Cover: Mustang Engine Parts - Mustang Engine Parts - M-2301-J - Fast Mustang Parts -- Aftermarket Wheels, Exhaust, Parts & Accessories | We are not endorsed by nor affiliated with Ford Motor Company |
Make an offer.
After a 9 year hiatus, I am finally back in a Cobra.
My 98 that I had 9 years ago.
For the past year though, I have been driving a 350z.
Loved the car and bought bolt on after bolt on. Thought it was pretty quick. Well, until I took it to Royal Purple Raceway. Even with all the mods I...
Looking at Custom Houston Performance Cams 4.6 4v
Natural, NOS, and S/C grinds
$850
Was wondering what to expect hp wise.
What else is needed?
How much does the install usually cost?
Well, We got side by side and I punched it. So did he. Hehe no contest he kept pulling away from me. (I need to fill my damn bottle). Anyway he got about 4 cars ahead of me we all of a sudden black smoke started pooring out of his pipes. He pulled over and so did I. Poor car was rattleing big...