Search results

  1. K

    2008 GT500 & 11" Wheels

    Thanks. A photo is worth a thousand words. Goes back to my original question that if I go with 11" wheels, does the bracket need to be removed to avoid being hit by the wider tire. I am sure others have been thru this; didn't want to learn the hard way.
  2. K

    2008 GT500 & 11" Wheels

    Thanks for the info. I found the bump stop relo bracket kit on Revan Racing. I occasionally take the car down to the track and want to improve the traction. I am around 636 rwhp. I have lower control arms, QA1 adjustable shocks, adjustable panhard bar and so forth. Thought the wider tires...
  3. K

    2008 GT500 & 11" Wheels

    I had read awhile back that on an '08, the bump stop bracket had to be removed. I have an extra set of stick rear wheels that I was thinking of having widened to 11".
  4. K

    2008 GT500 & 11" Wheels

    Does anything need to be done to an '08 GT500 when going with 11" wheels" ? What is the widest tire which can be used with an 11" wheel?
  5. K

    2004 Mach 1 P0352, P0353 and P0354 Codes

    Took the Mach to the track today. Didn't feel right over 5000 rpm. Check engine light came on. Checked with my SCT and had 3 codes; P0352, P0353 and P0354. Does this mean I have 3 bad COP's or something is else causing it?
  6. K

    Wheel Question

    I was told that I could have my rear rims widened to 11 inches to go with a wider tire but that there was a clip or bracket that had to be cut off to prevent rubbing. The clip was only required when the car was built. Anyone have any experience with this?
  7. K

    Ugly

    Came across this photo; can't beileve Ford would do this.:mj: Ford Confirms EcoBoost Engine, IRS For 2015 Mustang - StangTV Looks like I may be switching to Chevy after owning Mustnags for 40+ years.
  8. K

    Barton Shifter Conflict

    I have a Barton shifter in my '08 GT500. Duinrg installation I found out that the Competition Engineering drive shaft safety loop interferes with the shifter. Anyone know what front drive shaft safety loop will not interfere with the Barton shifter?
  9. K

    Power limit for 2010 Block

    Does anyone know how much power a block for a 2010 3V will reliably handle? Trying to decide to rebuild with forged internals or get a built shortblock.
  10. K

    Suspension Mods & NVH

    Late last summer I had J&M upper (non-adj) and lower control arms (extreme) installed along with QA1 single adjustable rear shocks. They made a real improvement in traction however the NVH, if you want to call it that, is pretty bad. It is not road noise but more like "clunking". I took it back...
  11. K

    NJ Inspection Question

    Took my '04 Mach thru inspection this a.m. because most of the categories they check thru the computer came up as "Not Supported". I passed 2 years ago with no problem. Has NJ inspection become more stringent in the past two years? What is best way to get it to pass?
  12. K

    J&M Upper Control Arm

    Anyone have a noise coming from the J&M upper control arm attributed specifically to the urethane bushing?
  13. K

    Paint Blistering on Coil Covers

    The paint on my coil covers has blisters on them with passenger side being worse than drivers side. Anyone else experience this issue? Anyone know what could be cauinsg the problem? It's a 2008 GT500.
  14. K

    FRPP Supercharger Upgrade Problem

    Had the 605hp kit installed. Car did not feel like it was running right on the way down to Myrtle Beach. Had the car on a dyno here and only put out 415 rwhp. When you get on it with boost it feels kind of jerky. When I first start out it has a long hesitation or bog until above 2k...
  15. K

    FRPP M-6066-SGT S/C Upgrade Kit

    I have seen vendors now offering the FRPP M-6066-SGT 605 HP upgrade kit for $3100 - $3500. Has Ford dropped their price? This is a big reduction from what is previously being sold for.
  16. K

    Rear Support Points

    I'm planning on upgrading rear LCA and UCA. What is location of rear jacking/support points for '08 GT500?
  17. K

    Schaeffer 5W50 Oil

    Anyone have any experience with Schaeffer motor oil. They make a 5W50. Schaeffer Oil | Supreme 9000 Synthetic Diesel Oil
  18. K

    Ford Incentives for 2011 Mustang GT

    I heard that Ford has released to the dealers the new incentive program. Does any one know if this affects the 2011 Mustang GT? Also, with the current $500 cash back, is that based on date of order or date of delivery? Thanks.
  19. K

    Redline 5W50 Oil

    Yes, another oil thread. I came across Redline 5W50 oil which staes for the "Shelbt Gt500 5.4L", but couldn't find if it meets the Ford "B" spec. Anyone have any experience with Redline oil?
  20. K

    Best Suspension Upgrades for 600-700hp

    Removing tires frm the equation, what would be the best/most economical rear suspension mods for a '08 GT500 with 600-700hp at the crank? Car is not a daily driver and will rarely if ever see the track.
  21. K

    FRPP Superpak for '07-'09's

    I was ready to pull the trigger on the FRPP 605hp Superpak, but then saw where Ford offers a 750hp Superpak for the '10's. Anyone hear anything if Ford will be releasing a 700hp +/- version for the '07's-'09's??
  22. K

    2011 Mustang GT

    It sounds real that the 2011 with have 412hp 5.0 engine. That rocks! Anyone know what the wieght of the 2011 will be?
  23. K

    Front License Plate Bracket

    I need to get my front license plate on my GT500. Are there any options out there other than the factory supplied one for the GT500? I hate to drill my front bumper.
  24. K

    Tire Shine/Protectant

    Just ordered new tires for one of my cars and was talking with the tire guy about the condition of the tires because I have a lot of tread left but cracking on the sidewalls, etc. He said the tire shine products cause the cracking and that Armorall was really bad for tires. In subsequent...
  25. K

    Tire Shine/Protectant

    Just ordered new tires for one of my cars and was talking with the tire guy about the condition of the tires because I have a lot of tread left but cracking on the sidewalls, etc. He said the tire shine products cause the cracking and that Armorall was really bad for tires. In subsequent...

Top