I am selling my 2003 Mach 1 5 speed manual with interior upgrade package. It was tuned by Chris at Dyno Edge. It put down 470 rwhp and 525 rwtq on a conservative tune. The engine, transmission and rear end are built with very high quality parts.
I can be contacted by pm or at...
I have a brand new unused Fore Precision Works complete return style fuel system. It turns out Im not going to need it for my power goals so Im selling the entire kit. This is a $2,200.00 fuel system on lethalperformance.com. Comes with everything needed to switch to return style. Im selling it...
See new thread:
http://www.svtperformance.com/forums/showthread.php?1034358-FS-Fore-Complete-New-in-box-1600-hp-return-style-fuel-system-Steel-FW-IC-Pump&p=14405083#post14405083
Ok so I had been having issues with the fuel system. Some sort of electrical gremlin where the car had no fuel pressure. I thought we had that figured out. The FPDMs were overheating and going into thermal shutdown so plugging in a spare set would fix the issue. This was happening before I tore...
So I was an idiot when using the harmonic balancer puller to get the balancer off and didn't use the pointed stopper at first to keep the main driver of the puller from pushing against the threads. It messed up the first thread on the crank before we stopped and put that piece on and finished...
Hey guys,
So I was replacing the timing cover gasket and ran into acouple snags. Namely two hex bolts on the metco bracket. I have a metco 4 lb lower setup and the metco billet bracket to the right of the lower has 3 flush hex bolts holding it onto the timing cover. I was able to remove the...
So my accessories drive belt tensioner broke and I need another one before I can put the car back together. Does anyone happen to have one lying around that they don't need and would be willing to sell for cheap?
thanks
Here's my old one. Just broke off with little force from a ratchet.
Hey guys,
Small back story........I have a timing cover gasket leak (fixing it this Sunday) and because of it the engine bay had a lot of oil residue built up so I took it to a do it yourself car wash with a pressure washer. Cleaned up the car (didn't use the pressure washer in the engine...
Ok here is what I have left from my part out. Some of these parts are brand new, never installed. Will post pics shortly
03 cobra heads 0 miles since rebuild. Stage 3 port, bronze guides, manley stainless steel forged valves, manley springs, all new seats and retainers.
$2500 shipped (firm)...
Ok, yes, two different classes of car, but...........
Maybe not at first but acouple years into the model run
Think about it......
If the S550 weighs 200 lbs less than current 5.0 GTs then that puts it at around the same weight as a C7 which tips the scales at 3,444 lbs. Ford already...
So im looking for some feedback on what to do here. Im trying to decide if i should wait for the 2015+ mustang to come out or just shop around for a 13' Boss 302, Roush Stage 3 or supercharged 5.0.
I have had a mustang in the garage for 12 years now. Once the mach is gone it will be the...
ALL INQUIRIES, PLEASE EMAIL ME AT [email protected] PM Box is clear too now.
PLEASE CHECK BELOW, EVERYTHING LEFT IS PRICED TO MOVE!!! I need this gone before Christmas so I have dropped the prices significantly!!
Im going to include shipping for everything but a couple awkwardly shaped...
Hey guys, sadly I have to sell my project car :( I dont want to at all, but some stuff came up and its just the smarter move right now. I need some suggestions tho. Should I sell the whole project together to see if someone wants to finish it? Or should I just part everything out seperately...
Ford Social: Video Game Technology for the Ford Mustang
Apparently this will be an upcoming option for new mustangs.....
Might actually work better than a shift light if its done properly.
Hey guys, this just started happening, but when i try to click on my username in the top right side to view my profile it gives me an error saying:
This user has not registered and therefore does not have a profile to view.
Ive never had this before and I tried searching for it with no...
I decided to create the build thread since my car is about to go under the knife. I know this is in the terminator forum, but i figured it was appropriate since my car is essentially the same as an sra swapped cobra at this point.....Mods feel free to move it if you disagree.
The build starts...
Hey guys, ran into a 12 5.0 with intake/exhaust the other nite. I pulled up next to him at a light. This being the last stop light for the next 4 miles and no feeder roads. It was late and we were the only ones around.
I threw it in 2nd and waited for the light to turn green. 2nd, you say...
Hey guys, im building up my eaton only mach, and could use some advice. Im going for the most power I can get out of it and want to run 9s at 135+. Dont know what it will do on the dyno, but it would be cool to see it hit upper 500s or even touch 600, however, the track numbers matter more. Its...
Hey guys, Im posting this up for a coworker who is looking. He wants a Black 03/04 Cobra. He will take the coupe or the convertible. He is looking for a clean example with almost no flaws and 30k miles or less. It can have mods, but no twinscrews or turbos. Intake, exhaust, tune, pulley and...
Looking for a race ported posi eaton with port matched tb and plenum. It can be a dragon tb or the stock one.
I want the best possible ported eaton out there because im going for a big power eaton only setup.
Thanks!
Just as title says Im looking to buy a used 03/04 Cobra rear bumper that is factory ford. I dont want an aftermarket piece. Ive been down that road and fitment was awful. Color doesnt matter because it will be repainted azure blue for my mach. I dont mind chipped paint as long as the body of the...
Ill be installing some new mods in august. Im curious how much the car will make.
I made 486 rwhp and 490 rwtq SAE with the following:
Unported eaton with 3.1 upper and stock lower
Stock cams advanced 4 degrees
10.1:1 compression
.030 over bore
1 & 5/8" longtubes with 3" collectors...
So last nite my belt tensioner locked up and my belt was squeeling loudly and I could smell burning rubber. Belt didnt snap thankfully. Turns out that not only is my belt tensioner bad but so are most of my supercharger idlers and pullies.
Car is about to go down for a headswap. Figured I...