Search results

  1. Cobra8urZ06

    WTB 1-2 stock 03-04 cobra pistons

    Have to be in good shape, need them asap!
  2. Cobra8urZ06

    MG 03 cobra, new built t56, no motor $12k

    Since I couldn't sell the car complete, I'm going to put the motor and turbo setup in a foxbody i just bought. This car is completely intact other than the motor being removed- Full interior, IRS, sumpted tank with fore billet hat, wire harness etc. I'm currently daily driving the car so the...
  3. Cobra8urZ06

    WTT my Turbo 03 cobra for a lightning+$$$

    All the details are here, car has a lein and would like $11k plus a truck, thanks! http://www.svtperformance.com/forums/showthread.php?958446-FEELER-Turbo-aluminum-block-03-cobra-ccw-s
  4. Cobra8urZ06

    FS CCW Classic Hyperblack w/ARP hardware 18x9.5/11 Nittos

    Selling my 18x9.5 18x11 CCW classics with 335-30-18 nitto 555r's and 285-40-18 555s. They are hyperblack (gunmetal) with arp bolts and no curb rash. Tires are 60% rear 80% fronts looking to get $3800 obo They are located in gainesville Fl
  5. Cobra8urZ06

    CCW Classics hyperblack 18x11 18x9.5 nittos

    CCW Classics with arp hardware and no curbrash the wheels are perfect, could use a polishing to really shine! Tires are nitto 555sfronts are 285/40/18 95% rears are 335/30/18dr's 50-60% Looking for $3800 obo or maybe a magnum t56 and some cash, located in gainesville florida.
  6. Cobra8urZ06

    took the cobra to the track

    http://www.svtperformance.com/forums/pics-videos-buffet-149/998054-turbo-03-cobra-track.html#post13963713
  7. Cobra8urZ06

    Turbo 03 cobra at the track

    Finally got the car out in she decent weather and with the new wastegate springs. Just wanted to see what the car would mph wasn't really concerned with an et especially with it being on a 335-30-18 555r but it did fairly well all things considered. Boost comes in very quick between shifts no...
  8. Cobra8urZ06

    Anyone have a boost a pump fs?

    need one asap let me know thanks!
  9. Cobra8urZ06

    Turkey Rod Run Daytona Beach.....

    Anyone going? i'll be there in the turbo 03....just wondering who else will be attending?
  10. Cobra8urZ06

    Anyone around Gainesville?

    Moved here a couple months ago, and i've been driving around with the turbo 03 and haven't run into any car guys.
  11. Cobra8urZ06

    FEELER: Turbo aluminum block 03 cobra ccw's

    Moving to gainesville and with a new job i may have to sell my car. It's an 03 cobra mineral gray with 105k on the chassis. There's a long list of mods to the car and quite a few pictures. I can take more specific pictures of things if needed. ENGINE: 05+ wap block .010 -18cc cp pistons...
  12. Cobra8urZ06

    turbo cobra couple videos of the car back on the road

    Playing with the boost controller: https://www.youtube.com/watch?v=ewz2pdFDBf0&feature=youtube_gdata_player At the track the other night: https://www.youtube.com/watch?v=5xgBQsmxeqw&feature=youtube_gdata_player New motor wap block cp pistons 03 cobra crank and rods and bws378.
  13. Cobra8urZ06

    p2195 code, stfts -25/25, no 02v bank 1....

    Car has o2 extenders and new o2 sensors, swapped them and still the same result. It's odd to me the i2 is showing o.ov and the fuel trims are all screwed up. Any ideas? And I searched and have already done what's been mentioned.
  14. Cobra8urZ06

    2003 cobra heads complete 26k miles excellent condition

    03 cobra heads 26k miles, valves are in great shape and just had the surface cleaned at the machine shop so they're ready for installation. $850 obo plus shipping and paypal
  15. Cobra8urZ06

    2003 cobra heads complete 26k miles excellent condition

    03 cobra heads 26k miles, valves are in great shape and just had the surface cleaned at the machine shop so they're ready for installation. $850 obo plus shipping and paypal
  16. Cobra8urZ06

    WAP block build ?'s

    I need help with the chain guides that go over the screw in dowels, the 03-04 guides won't fit over the dowels so i need a correct part number or correct vehicle for sourcing the part thanks!
  17. Cobra8urZ06

    03-04 cobra spoiler

    spoiler is black, has had clear coat sanded through due to planning on repainting. 3rd brake light is cracked and missing left tab In overall good shape $275 obo
  18. Cobra8urZ06

    2003 Cobra longblock 26k miles

    I have a 26k mile longblock that wont have any valve or timing covers on it or primary chains, tensioners etc. All of these parts were swapped to my new built motor. Motor ran fine when pulled, i compression tested it and had 173-178 psi. will come with oil pan, oil pump,water pump and rear main...
  19. Cobra8urZ06

    4v turbo kit tial mv-s 38's garrett gt4202

    This is a cg fab hotside that retains power steering and ac,it's also been double ceramic coated inside and out and wrapped. Has 2 tial mv-s 38mm wastegates, barely used gt4202 74.5mm with tial turbine housing (lightweight and compact $800) downpipe and side dump, bung in downpipe for wideband...
  20. Cobra8urZ06

    4v turbo kit tial mv-s 38's garrett gt4202

    This is a cg fab hotside that retains power steering and ac,it's also been double ceramic coated inside and out and wrapped. Has 2 tial mv-s 38mm wastegates, barely used gt4202 74.5mm with tial turbine housing (lightweight and compact $800) downpipe and side dump, bung in downpipe for wideband...
  21. Cobra8urZ06

    2003 Cobra longblock 26k miles

    I have a 26k mile longblock that wont have any valve or timing covers on it or primary chains, tensioners etc. All of these parts were swapped to my new built motor. Motor ran fine when pulled, i compression tested it and had 173-178 psi. will come with oil pan, oil pump,water pump and rear main...
  22. Cobra8urZ06

    NEED ASAP Driver side head

    need a complete good condition head that is ready to be bolted on.
  23. Cobra8urZ06

    (18" 2000) Cobra R rims, what lugnuts?( very tight fit)

    I want to run (18" 2000) Cobra R rims on my 03. I have the rims, but the factory lugs won't work with the rims as I can't get the socket on the lug as the socket wall is too thick. I need a a lugnut with like a key on the end of it as I can't get the socket on. What did everyone else use for...
  24. Cobra8urZ06

    WANTED 03-04 cobra pistons

    looking for a set of pistons preferably low mileage or new even
  25. Cobra8urZ06

    Turbo 03 cobra ignition problem.......

    So i threw a code for #8 cylinder misfire, bought a couple oem cops and switched them out, turn the car back on after switching the cops and sounds like piston slap or some valvetrain noise......drive the car about 5 minutes noise goes away completely still has a misfire though. While changing...

Top