Search results

I know there are 5 03/04 Cobra computer codes: YDHO,YDH1,QUD2,AMZ1 AND HSF0. I have an SCT Xcal2 handheld tuner with my stock tune and 3 other tunes on it. If I buy a PCM, do the computer codes need to match if I load my stock tune/other tune onto it with the handheld once I get it? Do I...

Hey guys, looooong time no see :) Fuel pumps died on the Cobra.. replaced the fuel pumps now she won't start. I'll paste what I had been keeping track of: Car started and died immediately, was very low on gas. Added fuel Uploaded tune via SCT XCal2 when car wouldn't start. Car would start...

Hey guys, been awhile. Hope I see some familiar names around still. I still have the current mods in my sig, and am looking for advice. A few years ago, I had a cross-threaded plug (I think) in the rear passenger side (#4) and blew it out. I used a lock-n-stitch kit with an aluminum...

Well I blew a plug out of #3. It looked like it was cross-threaded last time they were changed. So... now I need some thread repair done. No one I call has even heard of the time-sert kit, or the Full Torque Lock-N-Stitch. They all want to pull the head and helicoil it, which I'm not doing...

Hey guys... Got some brand new Hoosiers on the car today so took it for a few spins with my bud. It sounded like I had a slight exhaust leak since I got my X-pipe put on but I never thought much of it. Anyway, I floored it through first, shifted to 2nd, and as soon as I shifted into 2nd...

She has way more in her, I was playing with shift points and I definitely wasn't driving it to her full ability. Not only that, but my 60ft alone has mid 11's in it. Best 3 runs of the night: 1) 11.91@118, 1.8 60', 1/8th mile 7.72@92 2) 12.03@118, 1.9 60', 1/8th mile 7.8@92 3) 12.07@117...

This is the dilemma i'm in now... After the blower port, traction became a little more of an issue. However, my nittos when the port was done were about 25% life. Now that they are bald, the car is sitting. While I sit here waiting on tires, I'm considering just pulling the trigger and ordering...

Would stomp all over a stock 03 cobra. He said basically that he wishes he could have raced me before I did any mods, because "now" I would kill him, but before his 99 firehawk would have stomped all over me. I tried to talk some sense into him, but he won't listen. I've tried to look up...

Just put in an order for some 275 555's for the front, and 315 555R's for the back, as well as some ceramic hawk brakes. Can't wait :pepper: I hope the ceramics feel a little better than stock, that or I need braided lines because high speed stops my brakes just melt away. The fade on the...

I've seen quite a few people ask about black Cobra inserts, and since I have some but hadn't taken any pictures, I snapped a few pics. I'm a fan of Cobra inserts all the way, not a fan of the 125+ bucks some places want for them. Anyway, I got these off of ebay, they cost 3 dollars, and...

My mods are in sig. I was rompin on the car a bit today, and did some datalogging. While I was at my tuners he felt I was seeing a bit too much boost, and another guy at the shop who owned an 03 cobra awhile ago said he needed long tubes at like 450rwhp, which I had always heard the stock...

:banana: ^^^^^ Right there. Wait. :pepper: ^^^^ There we go. I mean, a tornado-hurricane-ice-storm could not have wiped the goofy ass grin on my face. First gear, makes me lol . Second gear, if it hooks, hurts my belly. I finally found some open road and gave her a few 3-4...

After just upgrading to the stg v, and getting a different intake, I'm selling off the following: Stock 03 Cobra Injectors: Sold MAC Cold air intake: $70 shipped (20k miles on, very good shape, no nicks on the chrome, shines up nice) It's a little dirty but I'm cleaning it up before...

Hey guys, figured I'd post up the numbers. I'm at work and don't have the sheets, but they are pretty convoluted anyway. They have 5-6 parameters on each printout, rpm/boost/tq/hp/af/spd It was a good time, and I found out some interesting info. My numbers went to 482 RWHP / 485...

Half asleep driving to work I look up just in time to see myself flying through a redlight. Cop is opposite of me waiting at light , and there's someone waiting to go on the right. He busted a Uturn before I could get a 1/8 mile away. Lol Like I was going anywhere in my 180,000 mile...

Hey guys, This isn't Terminator related, but it's a predicament regardless, and I'd like your input. OK, my dad has a '68 Corvette with 606 original miles on it sitting in the garage. It is not the original motor, he swapped with someone back in 1971, but the guy still has the...

Hey guys, Gave a call into Stieg to see if my blower shipped today... and when I called in they went to check... got back on the phone and said it should be AT MY HOUSE! Whoa! I was expecting it to SHIP today and get it Weds/thurs! So I had to call the wife and tell her to get it...

With D-day of the stage V arriving next week, and I've got almost all the parts at the house, just waiting on a BAP wiring upgrade kit, I'm getting anxious. I'm not really worried about what i put down, but I am curious. I prefer a safe tune, and I didn't even have a race tune made (had...

Figured I'd post a few of these up. I ended up breaking 2 intercooler bolts, and the plenum to blower gasket was wayyy gone. Also need another plenum to intake gasket :fm: Anyway, here ya go. Gotta call stieg monday morning to get a new price for the gaskets + 2 bolts backed out of the...

Hey I bought a BAP from a member on here, hoping he just forgot some parts, but I just wanna down some jack right now so i'll show ya pics, and tell me what i'm missing, so I can try to make something happen. It was supposed to have an upgrade kit w/.

Just got done ordering a MAFia from LFP, a SB RAI from JLT, and my BAP w/wiring upgrade should be here today! I'm pumped, and can't wait to pull the blower off this weekend and get it shipped off to Stieg for a Stg5. Anything I'm missing? (I know injectors, i'm putting it on the dyno before I...

Hey fellas, After seeing what I'll be getting back from taxes and the budget for the car... I am going to go ahead and get a port done, but I'm going to be waiting on doing the lower pulley and some other mods until mid-end of summer, possibly next year. I really just want to get...

Hey fellas. I posted this in pics and vids but that section is almost worthless, I'll go to show my buddies something off of there from an hour ago and it's already on page 10. It's a quick clip I made with the few shots of the cobra i do have but i think it came out pretty nice. I used...

Clicky I'm a newb with Sony Vegas but i spliced together the very few vids I got to take with the cobra this summer and posted it on streetfire. Lemme know what ya think :P :beer: Can't wait till winter is over so I can get some real videos up :burnout:

Well I'm gonna send the blower to steig, can't pass up this sale on ports... So far my order list looks like this... - MafIA or SCT2800 (probably mafia) - KB BAP 40amp w/ wiring upgrade - MMFLSFC - 2lb lower pulley - Stg IV port - New Belt -(have no clue on the size) -...