Search results

With great sadness I regret to inform you all that long time SVTP and Mid Atlantic Cobra Association member Bryan AKA KingCOBRAsvt_99 passed away Friday morning. Bryan and I actually met around 2005 through this website and the club and it was a big part of his life and he had several friends...

With great sadness I regret to inform you all that long time SVTP and Mid Atlantic Cobra Association member Bryan AKA KingCOBRAsvt_99 passed away Friday morning. Bryan and I actually met around 2005 through this website and the club and it was a big part of his life and he had several friends...

Sold my GT500 today and don’t need this. My buddy that I bought the car from bought it and used it a handful of times on the car in his garage. I’ve never used it, could have been a giant dildo in the bag for all I knew until I opened it up a few minutes ago to inspect and photograph. I can’t...

Looking for a set of 11-12 SVTPP wheels in great shape. NO EXCEPTIONS, they must be the original wheels. Preferably with good tires but without is ok if the price reflects that. $1000-$1500 with good tires and TPMS is what they go for so that’s what I’m willing to pay. FTF in the Tampa area is...

For sale is my2012 white no stripe SVTPP GT500. With electronics package and nav. Mileage is 37,9XX. I’m the 3rd owner, I bought it from a friend who bought it from a friend. It was bone stock until 29K miles when longtubes and bolt ons were done and remained that way until 35,XXX when I did...

Just changed over a bunch of stuff on my Shelby and have this stuff left over. Payment Zelle or Paypal family and friends only (must be marked "personal reimbursement). If you have an issue with this, move along. You can see how long I've been here and I'm not here to rip anyone off, my paypal...

Looking for a couple pullies, figured I'd see what people have that's used before ordering new. Must fit GT500 2.9L 10 rib application. Definitely want a 3.0" and maybe a 2.875" and 3.125" too.

I’m trying to nail down the pulley combo for my car without having to buy a ton of pullies. I thought I had it figured out but it looks like all the data I was looking at were for older gen 2’s and gen 3’s. The gen 4 is supposed to make 1-2psi more with the same pulley than the gen 3, not sure...

I’ve got a ARP balancer bolt on the way from lethal. I was going to use it to install the new 10% lower, but I’m leaving the 15% that’s on it with a stock bolt that the previous owner had a shop install and I don’t know if they used a new bolt or followed Fords torque sequence so I’m Just going...

Selling a IW/Ford Racing 10% lower. No different than the standard IW lower, just has the Ford Racing Cobra Jet markings and part number on the front. Has cuts for double key slots so can be used on single or double keyed cranks, only comes with single key though. Not sure on mileage, I bought...

I’m thinking about dropping a 6R80 in my 2012, and have lots of questions. 1. I found a 2011-2012 6r80, would this be ideal for my car vs a newer one, or does it make a difference? 2. For a car making 800whp or so, would the PBH 1000HP rebuild kit suffice, or are there other parts I should...

I called BPS and spoke to Matt because I had some questions about idler size, he said they actually sell a complete LW pulley kit for the GT500's. He said you get the choice of a 76mm or 90mm idler and he said you use the 90mm if you don't have an auxiliary idler kit, and a 76mm if you do. Also...

Title pretty much says it all. Must be in excellent/like new condition. These are the last parts I need for my new setup and figured I’d see what’s used before I buy new. I can get the IW for a little under $600 and the TB for a little over $500 so it’s going to have to be a better deal than...

My car is a 2012 with 35K miles, the last 7K miles with a 15% OD lower. My AC compressor is starting to take a shit, it started to squeak a little when engaged a little bit ago and now it’s turning into more of a squeal and it’s going to be long until it lets loose. Is this a common problem...

I’m getting ready to do L&M NSR cams and some sort of the TB and inlet on my car. Power mods currently on the car: Kooks LT Kooks o/r X Magnaflow axle backs 2.4 upper pulley Overdrive lower (believe it’s a 10% but might be a 15%) JLT CAI I believe that’s it. It’s got a bunch of drivetrain and...

Selling the following two parts. No trades. Payment via PP family and friends or USPS MO or certified check only. - McLeod RXT 1200. I got this used, insure of miles and such but the one time I pulled it open it looked good. I was planning on rebuilding it and keeping it as a spare but I’ll...

Title pretty much says it all. They're off my 2012 GT500 SVTPP car and have Nitto 555 G2's all around with less than 2K miles on them with no burnouts or other jackassery. Still have the TPMS in them too. One of the fronts has some minor curb rash, it's not deep at all (barely through the...

Kooks catted X PN 11323220. Fits all 07-14 GT500’s with cooks headers. May fit others too but you’ll need to cross reference the part number. $400 FIRM. Picked up in Trinity, FL 34655. I’ll gladly ship on your dime but I’m not going to sit here and get shipping quotes for every swinging dick...

On April 25th 2017 I located a used 2013 Ford F150 Raptor in a rare color at Ted Britt Ford of Chantilly. I received an emailed price quote for the vehicle plus dealer processing fees, and tax/title. At 8:36AM on April 26th 2017 I placed a call to the service department and spoke to an...

On April 25th 2017 I located a used 2013 Ford F150 Raptor in a rare color at Ted Britt Ford of Chantilly. I received an emailed price quote for the vehicle plus dealer processing fees, and tax/title. At 8:36AM on April 26th 2017 I placed a call to the service department and spoke to an...

*SOLD* Metco 2.6 pulley, Idler kit, VMP pulley tool UPDATE: The pulley, idler, and tool have all been sold as a package deal. Thanks. The title pretty much says it all. I have a Metco 2.6 pulley with hub, Metco idler kit, and VMP pulley tool for sale. I purchased these items second hand on...

MGW gen 2 shifter. Bought the shifter a couple months back from another forum, seller said it had a couple thousand miles on it. I purchased the knob new from MGW. I never installed it and have decided to sell my car. $375 shipped and insured FIRM. Paypal "family and friends" preferred. If...

Since I old thread got deleted before I had the opportunity to put up a proper picture with my username and date, I'm relisting this. I would like to sell my 2011 GT500. I purchased it bone stock from Koons Tysons Chevrolet last April where the original owner traded it in for a new Vette. It...

Kooks catted H pipe Kooks 3" catted H pipe. Bought lightly used (less than 500 miles) from a member on here. $400 shipped and insured to the lower 48 states or $350 picked up in the Front Royal, VA area. I also have a O/R X pipe for factory manifolds, JLT CAI and a MGW Gen 2 shifter for...

As title says. Excellent condition. Bought lightly used but decided not to mod my car. $225 shipped and insured. Located near Front Royal, VA for local pickup as well. I also have a catted H pipe for kooks longtubes, O/R X pipe for factory manifolds, and MGW Gen 2 shifter for sale. Please see...