Search results

  1. 03Mach04Cobra

    BNIB - BBK T5/T45 Short Throw Shifter

    Brand New - Never used BBK Short Throw Shifter (Part # 2700) Will fit any T5 or T45 Transmissions $165 PM if interested!!!
  2. 03Mach04Cobra

    BNIB - BBK Short Throw Shifter

    I have a Brand New - Never used BBK Short Throw Shifter. Part # 2700 Will fit T5 or T45 Transmissions $165 Please PM If Interested!!
  3. 03Mach04Cobra

    FS: Short-Throw Shifter

    I have a Pro 5.0 Short-Throw Shifter for a 03/04 Cobra - It has a Steeda handle Good condition with very few miles on it. Can get pics if needed! Send me some offers!!! Thanks
  4. 03Mach04Cobra

    FS: 4.6L DOHC Valve Covers - Black

    I have a set of Valve Covers that came off a '03 Mach 1 - They are the factory painted Black. They are in good condition, but do not have the Coil Covers. I planned on painting these Mystichrome and put on my '04, but I decided not to. Can get pics upon request. Thanks $175 Shipped
  5. 03Mach04Cobra

    FS: 2003 Mach 1 4.6 DOHC Valve Covers - Black

    I have a set of Valve covers that came off a '03 Mach 1 they are the factory painted black. I bought them to paint Mystic and put on my '04 Mystichrome, but decided not to. They are in good condition - Pics available on request......Do not have the Coil Covers. $175 Shipped Thanks
  6. 03Mach04Cobra

    Help - Car bogs down really bad

    Ok guys I need your help! Well ever since I put the GT pumps in my car I have had a terrible time getting it tuned right. When I'm sent a tune setup for the GT pumps my car will hardly even idle, if it does when I go to rev it bogs down really bad. But I have a tune that is setup with the...
  7. 03Mach04Cobra

    Can you bench test a fuel pump?

    Is there a way to bench test a GT Fuel pump? - I'm having fuel issues and took out the fuel hat to check my lines and connections, but everything looks good so I was wondering if there is a way to test the Fuel Pumps.
  8. 03Mach04Cobra

    GT Pumps - Quick question

    Has anyone tried to use the GT fuel pump padded filters instead of the stock pump restrainer pads? The article I'm looking at shows to reuse the stock strainers but mine has the L shaped ones (they come with the GT Pumps) - The article says these filters are too big, when I took the pumps out...
  9. 03Mach04Cobra

    Please Help - Voltage Problem - Datalogs inside

    Ok guys, I need your help. I'm at a loss - I have a voltage problem and I just cant figure it out. It was found when my tuner was trying to fix my tune well he got that problem fixed and it was running good, but he said I need to find the voltage problem. So I did the easiest thing and just got...
  10. 03Mach04Cobra

    Mustang Week '10 Speedway Burnout PICS

    It took me a bit to get my camera on the right setting to take good pics that night, but I think these came out pretty good. Let me know what ya think!! And I had to save the best for last!!! This is my new Desktop Background - I think its...
  11. 03Mach04Cobra

    Trouble with Datalog Air Fuel Ratio....HELP

    Ok guys so I got my DynoJet Wideband commander all hooked up and the speedhut gauge works great. When I bought it I went ahead and ordered the Dynojet Data Acquisition / Gauge Combination Harness. I got the 9pin cable and used that diagram showing Analog 1, Analog 2 and the ground. I used a...
  12. 03Mach04Cobra

    Wideband O2 Location quick question

    Ok, before you start bashing me saying to use the search, I did and my question is. Why does everyone say to have it on the driverside pipe? Does it matter if its Passenger or Driver? - I marked a place on the passenger side pipe last night that would work just fine (between the exhaust manifold...
  13. 03Mach04Cobra

    HELP!!! Coolant crossover.......

    Does anyone know if you can buy just the fill plug for the Coolant crossover tube!? - I called my local Ford dealership and they say you have to buy the entire Crossover tube. I only need the plug! - If anyone knows the part number from Ford please let me know! Thanks
  14. 03Mach04Cobra

    Dynojet Wideband Wiring questions....

    Ok, got a couple more questions on this wiring, I want to make sure I understand it all before I go hooking up wires and stuff. Well I went and bought the optional data acquisition/gauge harness from dynojet to make things easier on me. So I noticed that cable I bought has 3 wires (Violet...
  15. 03Mach04Cobra

    New help with a wideband.....

    I'm looking into buying a wideband A/F ratio gauge so I can datalog it for Rick to be able to get my tune revisions right on. There are no dyno's in or around my area so I figured this would be the easiest thing for me to do. But I really dont know anything about these things.....What would be...
  16. 03Mach04Cobra

    Help me with this - Looking at a Used 04 Vert

    My friend is looking at a '04 Vert and we got some pics of the motor and there looks like there is some type of wire ran from the s/c to the negative side of the battery - Any idea why this would be done!?!?! Also, List any mods you see done to the motor, I can see CAI, different battery and...
  17. 03Mach04Cobra

    Secondary pullies....???

    Ok so I know my noise is coming from the secondary pullies..the ones behind the pulley bridge - My question is what all is spun by these? - Im guessing water pump etc. but I dont know what else Thanks for any help
  18. 03Mach04Cobra

    Help me with this annoying noise!

    Can any of you identify what is causing this noise? - At first I thought it was kind of a neat sound, ya know like a Centri. s/c but now its just annoying and I want it to go away haha - Any Ideas out there? YouTube - Annoying Noise
  19. 03Mach04Cobra

    Changed to 4.10s now rearend is loud....

    Well I recently just changed the rear end gears to the Ford Racing 4.10s polished gears......Since then the rearend has been making a loud humming/whining type noise when cruising.....Is this normal for the gears to be louder in these cars? I have put 4.10s in a '96 Cobra and there was no noise...
  20. 03Mach04Cobra

    Headers - Worth it!?!?! Or not?

    So are the Long Tube headers worth all the trouble you have to go thru putting them on!? - I've only had one experience with Long Tubes and that was on my old '92 GT Mustang and they were a huge PIA to install...Took an entire weekend! And I really didnt see much difference in power - How are...
  21. 03Mach04Cobra

    Headers worth it!????

    So are the Long Tube headers worth all the trouble you have to go thru putting them on!? - I've only had one experience with Long Tubes and that was on my old '92 GT Mustang and they were a huge PIA to install...Took an entire weekend! And I really didnt see much difference in power - How are...
  22. 03Mach04Cobra

    3.55s to 4.10s worth it?

    Hello, I'm trying to decide if I want to change the stock 3.55 gears to 4.10s - Will there be that much of a noticable difference? - I'm not trying to make this a all out track car, but I do race from time to time at a local 1/8th drag strip - I dont want to make the gas mileage terrible on...
  23. 03Mach04Cobra

    Pics of My Cobra and My Friends 96 and 03 Cobra's

    So it was a super nice day today and we decided to go out cruisin for a lil bit. Snap quite a few pics today here a few. The '04 Mystichrome is mine - the other two are friends of mine, both of them just bought there Cobra's recently - Should be a fun summer :rockon: Let me know what ya think!
  24. 03Mach04Cobra

    NOS 04 Mystichrome Touch Up Paint

    I was able to get my hands on a few bottles of the Mystichrome (G6 Paint Code) Touch-Up Paint! - This is the deluxe bottle, has a brush and a pen style applicator - This is very hard to find now as its no longer made! I'm asking $24.95 Shipped
  25. 03Mach04Cobra

    NOS 04 Cobra Mystichrome Touch Up Paint

    I was able to get my hands a few bottles of the Mystichrome Touch up Paint the deluxe bottles - Have the brush and pen style applicator - This touch up paint is very hard to find now as its not long made! I'm asking $24.95 shipped!

Top