Search results

  1. heytonyman

    Dyno Tune Dry 10lb Nitrous system, Auto Bottle Heater, Purge Kit, Gauge

    Up for sale is a Dyno Tune Dry Nitrous System. Has a 10lb bottle with high-flow valve and stainless brackets, dump-tube, NOS brand pressure gauge, automatic bottle heater kit w/pressure switch and relay, purge kit added on, micro throttle switch, braided lines and nozzle. I took this kit as...
  2. heytonyman

    Big cams giving a false lean condition at idle?

    I'm running Comp Stg 3 blower cams with the idle set around 850rpm's. Tuning with the PRP software on 93 octane. SCT2400 meter, 60's, triple returnless pumps. Motor is a 304ci 4V with race ported heads, Kooks LT's. About 9.3:1 CR. Vortech T-Trim at 10psi until I get a handle on the tuning...
  3. heytonyman

    Reichard Racing Manual Tensioner w/ Spring Assist, 2 Stock Tensioners, Metco Plate

    Cleaning out some more spare parts and came across these gem's. I take Paypal Gift, +3% for Goods / Services, or USPS Money Orders. I ship USPS Priority Mail. If you want insurance over $50 dollars it will cost a few bucks more. Post or PM to contact me. Reichard Racing Manual Belt Tensioner...
  4. heytonyman

    Billetflow Single-Blade Throttle Body

    Used in great condition Billetflow single-blade throttle body. No corrosion anywhere. Machined finish. No gasket included. Engraved "Terminator" across the top. No TPS, yours will bolt right on. I picked it up used on a complete blower package but never used it on my setup. Asking $350.00 +...
  5. heytonyman

    3.0", 3.25",and 3.5" Kenne Bell Pulleys

    3.25"and 3.5" Kenne Bell Blower Pulleys Up for sale are 3 pulleys from my Kenne Bell 2.8 blower. The 3.0 and 3.5 pulleys are sold! The 3.25 was bolted on for one dyno pull and taken off. Asking 50.00 Each + Shipping. Paypal +3% or USPS money order only.
  6. heytonyman

    JLT 110mm MAF housing, GT500 slot-style MAF, Diablosport MAFia adapter to 03-04 Cobra

    Used in great condition. 1,500 miles of use. Put down 775whp with this and was nowhere near pegged. I'd prefer to sell it all as a kit but will separate if needed. Asking prices: JLT housing SOLD. GT500 MAF SOLD. MAFia Adapter 125.00 + Shipping. Paypal +3% or USPS Money Order only.
  7. heytonyman

    Start N' Chager 180 Amp Alternator with wiring upgrade.

    Start N' Charge 180 Amp Alternator with wiring upgrade. Used Start N' Charge 180 amp alternator in great condition. Has over-sized pulley installed to slow it down. Less than 500 street miles with a stock size crank pulley. Never over-spun. Includes 4-AWG wiring upgrade with 250A Inline fuse...
  8. heytonyman

    BilletFlow 03-04 Cobra Snub Idler Bracket w/4 Idler Pulleys

    Used Billetflow snub idler 4 pulley kit in very good condition. 3-100mm pulleys and 1- 92mm pulley. Anodized black. All bearings are tight and noise-free. Does NOT include idler relocation bracket. I have the entire Metco lower kit for sale in a separate post. Asking 200.00 + shipping. Paypal...
  9. heytonyman

    Metco Lower Pulley Kit with 0 & 6psi Rings

    Metco lower pulley kit with idler relocation. In very good condition. Has a 6psi 9.1" ring. The upper idler bracket bolt is MIA. It stripped and had to be drilled. Same issue the last time I removed it too... I assume its a common issue because Metco sells a replacement bolt kit for 11 bucks...
  10. heytonyman

    FS: Ford Racing Tremec TKO 600 5-Speed Transmission - 0.68 5th Gear

    I have for sale a lightly used TKO 600 Transmission. .68 5th gear. Transmission has Under 5,000 miles of use on it. Bought it from a friend locally to use but ended up going all out with a T56 Magnum. No bell housing included, tho I do have a Lakewood SFI Bell housing for 4.6 Mod motors if...
  11. heytonyman

    FS: Ford Racing Tremec TKO 600 5-Speed Transmission - 0.68 5th Gear

    I have for sale a lightly used TKO 600 Transmission. .68 5th gear. Transmission has Under 5,000 miles of use on it. Bought it from a friend locally to use but ended up going all out with a T56 Magnum. No bell housing included, tho I do have a Lakewood SFI Bell housing for 4.6 Mod motors if...
  12. heytonyman

    FS: Pair of 28x11.5x15 Mickey Thompson ET Drags

    For Sale: Pair of 28x11.5x15 Mickey Thompson ET Drags. They have been treated in VHT and have just one pass on them. No screws in the beads and zero street miles. Paid 507 for these brand new from Speed Unlimited. I'd like to get 400 for them but make me an offer and we can work a deal. Thanks...
  13. heytonyman

    FS: Pair of 28x11.5x15 Mickey Thompson ET Drags

    Pair (2) of 28x11.5x15 Mickey Thompson ET Drags. They have been treated in VHT and have just one pass on them. No screws in the beads and zero street miles. Asking 400 or best offer. Thanks guys! Tony P.
  14. heytonyman

    Oil return fitting for Moroso Pan with Vortech Return

    The parts breakdown calls this fitting a 3/8" Male NPT to 1/2" inverted flare fitting. My Moroso oil pan has a 1/2" NPT bung on the front. My searches have come up short in locating this fitting. Does anyone know where to source a 1/2" Male NPT to 1/2" Inverted Flare Fitting? Thanks for the help...
  15. heytonyman

    WTB: 99/01 Cobra or 03/04 Mach 1 Throttle Cable

    Hey fellas, these parts are discontinued from Ford and wondering if anyone may have one laying around they are willing to part with. Thanks! Tony P.
  16. heytonyman

    Any MACA members looking to REALLY crank up the power??

    I just wanted to throw it out to MACA members and locals alike that I am selling the blower setup from my 4v GT. KB2.8h, MPH Behemoth inlet, Naz lower, and everything else you'd need to bolt right on. As always, members get dibs and taken care of on price. I'd love to see this setup stay local...
  17. heytonyman

    FS: Kenne Bell 2.8H, MPH Behemoth inlet, Naz Lower, and everything needed for install

    I am updating this thread and lowering the price on the MPH inlet. The Kenne Bell has been sold. The fuel rails, crossover, and injectors are sold. The lower intake manifold is sold. The throttle body is sold. The modified JLT intake has been sold. The intercooler and misc parts for that are...
  18. heytonyman

    heytonyman: Throwin' in the towel.

    Yeah guys its come to that point. With work picking back up, my new home ownership adventure, and constantly breaking this beast I have found a plain and simple lack of interest in my car. It's been an awesome 7 years owning it and all the hours spent in the garage spinnin wrenches with the old...
  19. heytonyman

    5.0 Big Bore + KB Behemoth + C16 = 775whp in HD

    After a year long build and more time than I can explain, it all came to a close today with a full Dyno tune from Dave Guy @ SGS Performance in Dillsburg, PA. The first pulls were with 93 octane and 18psi. After changing around pullies, belts, and tensioners to fight belt slip we ended up with...
  20. heytonyman

    WTB: 0lb Metco Lower Ring, 3.400 Pulley for KB 2.8H

    I'm looking for a couple pullies to make my new setup more pump gas friendly. Looking for a Metco Lower Pully in stock size, and also a 3.400 pulley for the new style Kenne Bell blowers. Prefer Black as color. Not having the search function really sucks so let me know what ya got! Thanks...
  21. heytonyman

    WTB: 03-04 Cobra Driver Mirror Glass

    My glass is cracked and it is not available separately from the Housing. If anyone has an extra mirror glass, or has a broken housing and is going to replace the whole assembly, I will gladly take the glass to help offset the cost of the assembly. Please PM me if you can help out. Thanks! Tony P.
  22. heytonyman

    WTB: 03-04 Cobra Driver Mirror Glass

    My glass is cracked and it is not available separately from the Housing. If anyone has an extra mirror glass, or has a broken housing and is going to replace the whole assembly, I will gladly take the glass to help offset the cost of the assembly. Please PM me if you can help out. Thanks! Tony P.
  23. heytonyman

    WTB: 03-04 Cobra Driver Mirror Glass

    My glass is cracked and it is not available separately from the Housing. If anyone has an extra mirror glass, or has a broken housing and is going to replace the whole assembly, I will gladly take the glass to help offset the cost of the assembly. Please PM me if you can help out. Thanks! Tony P.
  24. heytonyman

    FS: Black 18" Deep Dish Bullets

    Decided to change lots around with the car, including new shoes. These are a couple years old and have about 25K on them. The finish on the front wheels is peeling some. Very light rash on the RF wheel about 2" long. I'd rate them a 7/10. Guaranteed to be straight, no bends. You can come check...
  25. heytonyman

    FS: Built T-56 with Many Extras!

    Up for sale is my 2004 Cobra T-56 Transmission. 20K miles on the case, completely rebuild and upgraded 3,000 miles ago by Billy @ BAP in Silver Spring, MD. Transmission has all new bearings and seals. It has a 26 spline input shaft, McLeod Billet TOB sleve, all new syncro's 1-2, 2-3, 3-4, All...

Top