Search results

The wrinkles will all steam out no problem, they look worse in the pictures than they are. The reproduction covers you mentioned ARE NOT identical, they aren't the same quality and more importantly they lack the Cobra embroidered in the seat backs. The only way to get those are with the OEM...

I have a brand new set of seat covers for a 2003-2004 and I was wondering what the value of them would be. They are OEM and were removed from a car that had less than 100 miles on it when it was totaled. They have some wrinkles from being stored but have no wear or tear on them at all from...

I have a Kenny Brown Extreme Matrix Subframe system: http://store.kennybrown.com/product/chassis-support/extreme-matrix-subframe-system-1979-2004-mustang-and-cobra for my 2003 Cobra and I need to get it welded in. Obviously this is a critical thing to have done and it has to be done just right...

I have a Kenny Brown Extreme Matrix Subframe system: http://store.kennybrown.com/product/chassis-support/extreme-matrix-subframe-system-1979-2004-mustang-and-cobra for my 2003 Cobra and I need to get it welded in. Obviously this is a critical thing to have done and it has to be done just right...

I am looking for a oil cooler for the 03-04 Cobra to replace the one on my 03 Cobra. Part numbers are: Oil Cooler: 2R3V-6A642-AA Mounting Plate (I'll buy this too if you don't want to separate): F8ZE-6884-AB If you have one send me a PM with what you are looking to get for it/them...

So my oil cooler is pouring oil out of the weep hole all of the sudden and I clearly need to address that with something other than JB Weld (ahem you know who you are) :) I found this rebuild kit from speed concepts and was wondering if anyone had used it and what their experience had been. I...

I tried to post this in the TX "taste of home" part of the board over the weekend but no one seems to have an answer so I am going to take a flier and post on the main Terminator board. Like I say below I'll come to the Dallas or Houston area (or even OK City if I have to) to get this done...

I have a friend that needs to get some machine work done on his GM V6 block out of his boat. It needs your standard stuff - cylinders .30 over, deck straightened heads straightened and the cam and crank journals align honed. What is the best shop at or near Austin to have that done at...

Shop to install Kenny Brown subframe connectors near Austin (Or Dallas, Houston, OKC) I have a set of the Kenny Brown Extreme Matrix subframe connectors with jack rails that I need to get installed. I live in Austin and want this done perfectly. If I had a drive on lift instead of a 2 post...

Where is the best place to pull an oil plug to install a Speedhut Oil temp gauge? Or do I need to T at the stock oil pressure gauge location? I'm afraid with a T I won't get accurate temps. I am finally installing the Speedhut Gauges I bought a while back. I have Oil Temp, Coolant...

I have a friend that needs some machine work done on a Vortech V-6 block that was in his boat. What is the best machine shop in the Austin area? Thanks!:beer:

When will the Trinity be available to buy? Is it worth it or would I be better off stroking a 5.4 to get to 5.8 and building from there?

I am getting the Kenny Brown extreme matrix subframe connectors and I need a shop to put them in. I'm relatively new to Austin - where have people on the board gone to get their chassis stiffeners installed? If you have some pictures showing the work and could share them I'd love that, I'm...

Does anyone have a Steeda promo code? I am about to place a big order and any discount is appreciated. I looked in the vendor area and didn't see anything there. Thanks in advance for any help! :beer:

Up for sale is a like new Fore Precision Fuel Hat with dual Ford GT Supercar pumps ($150 a piece easy), the fuel level sending unit option (which was an extra $100), gasket ($25) and all of the hardware to install it. The parts have less than 2,000 miles on them. I took them in trade for...

I am interested in "deticking" my Cobra and I am wondering what the part numbers for the revised heads for the 03 and 04 Cobras are. What revisions were made to address the tick and are there any changes made that impact performance or anything else non tick related? Do the revised heads...

Anyone buy the WIK346 Relay/wiring kit when installing the WP346S electric water pump? I have the pump installed and am trying to make sure I am wiring it up correctly. The directions that come with the parts aren't awesome. If you have this installed can you PM me or post up the pictures...

I am looking to get a midrise lift to work on my Cobra, my F150 and my wifes 2008 Fusion AWD, but the Cobra is primarily what I work on. Next up is a clutch / TOB replacement and I'm looking for a low or midrise lift to do it on. It looks like there is plenty of room to pull the trans on...

I have up for sale / trade a new SCT Touch Screen Extreme SCT P/N 8900. I bought it for my 03 Terminator last summer with the intention of using it with my new Ford Racing/Whipple but before I really got to use it, my wife was good enough to get me the iTSX after see saw me drooling over it at...

I have a set of the Kenny Brown Extreme Matrix Subframe connectors I want to get welded into my 03 Cobra and I am looking for the best place to have it done. I'm new to Austin and don't know the good shops from the bad. If I had to drive to Dallas/Houston or San Antonio to get it done right...

If you have one for sale or trade please let me know what you are looking to get for it. Thanks! :beer:

The alternator in my 03 Cobra went to the great scrap yard in the sky. What is the best replacement alternator on the market? I did a search but the info was pretty old and I wanted to see if there was anything more current that people are using to get the most current. Thanks! :beer:

I know that Fore is out of business and there isn't going to be any formal support or warranty anymore but I do have some Fore parts I still intend to install on my Terminator once the weather cools down. Does anyone have contact information for anyone that used to make up Fore or know if...

Is anyone using something like this: If so where did you buy it and what do you think of it? I am thinking of getting one here: 97-04 FORD MUSTANG ALUMINUM RADIATOR SHROUD MOUNT+FANS | eBay It looks like it is thinner than the stock fan assembly and that it'd prob move more air...

I am in the process of installing the Ford Racing/Whipple supercharger upgrade in my 2003 Cobra. As part of the install I upgraded the supercharger idlers with the 4 pulley kit. It has 3 100mm idlers and a 90mm idler. I have the stock 3.5" upper pulley on the supercharger and a stock...