These are stock size premium replacement rotors. I have a new set of Hawk HPS pads that are recommended to run with these rotors. Front rotors have 12mm studs installed.
POWERSLOT - Faster Stops Made Easier
- Front Left/Right cost $235 ea/$470
- Rear Left/Right cost $154 ea/$308
- Hawk HPS...
$200 shipped
OEM stock center console lid wrapped in matching vinyl seat weave material. This material is gone and hard to find. I paid an expensive price to get a piece large enough to wrap my lid. I am only selling this because I recently installed a Expedition center console.
Will sell...
$250
The vinyl these parts is wrapped in matches the vinyl on the back of our seats exactly. Looks very nice installed! The lid is minus the mounting hinge and the back section has one tab broken, the reason for the broken tab is because of the tight fit. The part needs to be forced into place...
Black/Green Dual Interceptors $375 shipped
Barely used, I mainly got them to mock-up my Instrument Pods.
Gauges are V2.5.
A/C Control panel with 3 Knobs $70 ($79 new) SOLD
Lightning Bolt Fan Shroud $90 shipped ($99 new)
$50 (shipped) - NEW Stage 8 Header Bolts (#8906 4.6L/5.4L...
$1,700 for wheels outright
(includes 1 set of center caps)
(2nd set of center caps is $140, 12mm lugs are $130)
I just recently completed redoing these wheels. I have around 50hrs in sanding and polishing them back to perfection. Trade includes 4 Boyd Smoothie's and either set of center caps...
$140 plus shipping.
I just ordered 2 extra A frames for this gauge. Each cost me $9 + $11 for shipping. ($31 total)
The A-Frame is the part that looks like a A. Gauge will include 3 A Frames, one will have a crack but still can be used/fixed easily.
This gauge is the $299 versions.
PLX DM200 OLED OBDII Gauge (60mm) and Pod
Selling for $450 with custom pod.
Pod is fully prepped and just needs to be installed.
Purchase will require a core exchange for the steering column cover.
$399 from PLX
PLX Devices Inc. - Multi Gauges, Single Gauges, Sensor Modules, Wideband Air...
WILL SHIP
Complete Adjustable 3"-5" Rear Western Chassis Drop
- This is everything needed to drop the rear of your truck 3"-5".
- Kit is adjustable, 2/3 on the hangers and 1/2 on the shackles.
PARTS INCLUDED
- Western Chassis 2"/3" Drop Hangers
- Western Chassis C-Notch
- 6 Degree Shims
- New...
Anyone know what this number is?
There on a set of PI heads, both heads have the same number.
There 8 thread heads but not what I thought the correct numbers would be which are 2L3Z-6049-DA/BA.
Black Smooth/Professionally painted Autometer Column Pod ($80 + shipping)
(would prefer selling this to someone with a Innovate D-16 gauge. I had to modify the black bezel to get mine to site flush with this pod.
Would like to switch bezels with the buyer)
Will bring kit to Old Town if it's still around then.
- Complete 4" Rear Western Chassis Drop
(hangers 3/4, shackles 1/2, c-notch, shocks, shims)
PARTS NEW PRICE/SELL PRICE
- Western Chassis 2"/3" Drop Hangers $100/$60
- Western Chassis C-Notch $100/$60
- 6 Degree Shims...
Got a real good alignment shop to spend a full day getting it aligned correctly. Truck's ride is 1000x better than the 3/4 drop I had. It's like a Cadillac now but minus the rolling bouncey crap. Very Happy.
Had to remove roughly 2" of the Bell-Tech C-Notch on the left side to make room for the...
Finally got all the parts to make this work. Really wanted to have easy access to the service port to check my AutoMeter sensor reading.
Cost was around $120 for all the fittings, sleeve and braided hose.
Thanks Eric for the spare shrader valve! :beer:
Finally got a pod built for this thing. Here are some pics along with what sensors the gauge reads.
Here are the 5 Sensor Data screens, each shows 6 sensors at once.
Throttle %
RPM
MPH
Engine Load
Timing
Intake Pressure (NA)
Air Flow
Fuel System (open/closed)...
... new gauge location. :banana:
Will take some figuring out still, single din headunit will need new mounting brackets to drop it as much as possible. I will also need to reinforce the dash as you can see in the first image, a support is right in the way of inserting a gauge. Will also...