Search results

Posting an update. I replaced the ignition switch module which helped my situation. The car now will go into sleep mode which drops the current draw quite a bit, but it still shows about 250ma. I hear my ABS module constantly clicking as well. In the process of removing fuses and testing I...

I believe the body control module appeared a few years later. This is a 1998.

At this point, given the several voltages I've measured where I shouldn't have any with the key off, I think the next logical approach is to just replace the ignition switch module. When I pull it apart I might find something surprising that changes my opinion, but for now I think it is the...

Thanks for all of this. Yes and no about the sleep test. I saw and read that write up about doing the parasitic drain test. When I first tested the current draw I allowed the car to sit for over an hour and the drain stayed the same at 1.1 amps. I suspect that the amount of drain is so large or...

I've got a bit more data. Was able to steal some time this morning to do some electrical tests. I checked current draw from my battery and removed 4 different fuses, numbers #1, #4, #7, #10. Pulling #1 and separately pulling #10 dropped the draw from 1.1A to .97A each. I didn't try testing...

Vinnie - this is great...thanks! I looked at the 5 PDFs you sent me and they cover the area pretty good. I won't be able to disassemble my dash for a couple of days so I'm planning my attack now. Can you explain what "C209" means? Is it a connection point I can find under my dash? Also...

I did look at those two pages you attached. Thanks for that. It also looks like the IMRCs have power through fuse 10 if that is the problem.

Thanks guys for all of the help. I’ve had out of town visitors so limited time to do deeper tests. However, if fuse 1 does feed directly to the ignition switch then that seems like the probable problem. There is no question that fuse 1 is feeding the items that are staying on. Does anyone know...

Thanks hotcobra, but unfortunately it doesn’t like any 14 digits I use. Vinnie - thanks for the offer to help. I havent had time to fully diagnose, other than to confirm voltage isn’t being switch off. The draw I see from the battery is about 1.1 amps, so it drops quickly if I don’t drive the...

Thank you for the quick reply. I clicked on that link but it expects credentials to have access. I've been doing some research and am wondering if the switchable power comes through the ignition switch module. If yes, then maybe something has failed in there that is allowing continuous power...

I have a 1998 Cobra and have developed an electrical short that keeps power supplied to a few components after the ignition is off. Examples are the rear defroster and convertible top. This is causing a slow battery drain and kills the battery after a few days, so I need fix it. I can remove...

Still looking.....

I didn't know Ford made 58lb ones. How much do you want and do you have any info on them?

Not too picky on the size but at least 60lb Siemens Deka/Ford or larger.

Aren't these things just step-up transformers, or do they have some electronics in them?

Hey Guys, I buddy of mine owns Pro Modular Performance here in Austin. I actually used to tune for him a few years ago. Anyhow, he has started building this new car called a 750s. The first one just rolled out of his shop and it is amazing. -Turbo charged 755hp-844ft/tq 3valve engine...

I am doing some reconfiguration of my gauges and trying to decide if I am going to simplify and sell my dual Aeroforce gauges. I looked to see if there were any for sale and didn't really see any recently. I am curious, are these popular? Is there much of a market if I wanted to sell mine...

My fog light bulb inside the switch burned out. I figured out how to pull it apart and it uses 2 tiny blubs. Does anyone know the bulb numbers? Thanks Chris

I am referring to the one that replaces the stock dash bezel for adding 2 more gauges. I got mine today and there are two holes on the face (left side and right side) that face the front. Mine was used so I don't know what these are supposed to be for. Are they for small LED indicator...

So I did the LED lights in my dash and discovered that I don't care so much for the blue. I still have my Mach stereo and my aeroforce gauges are green also. I can live with the blue but don't love the different colors. One thing I saw was everyone was asking for how gauges looked in Cool...

Guys - I have seen several manufacturers of instrument cluser bezels that add two gauges to our cluster. Here is an example. Proparts Instrument Cluster Bezels Pillar Pods from HorsepowerFreaks Can anyone tell me the one that looks most like stock material and looks the best or at least...

So I did the envoy fog light mod last night using this approach: Envoy Fog Was pretty easy and took about 1.5 hours including having to R&R my IC tubing on both sides. I hadn't realized it until I did the first one that only two bolts hold the light to the modified mounting. Because...

I started a project a couple of weeks ago that turned out to be a bit bigger than I had guessed. My old IC core was a cork over 12lbs of boost so I removed it a couple of years ago and just used water/meth injection. I got a good deal on the largest IC that procharger makes. This sucker is...

I am trying to figure out if the 8 rib pulley I have has already been milled. Can someone tell me if the boss on a milled pulley is flush with the inner rib? Or can you tell me how much it sticks out when it isn't milled? Does a stock one stick out as much as a stock 6 rib one does? Thanks...

I just picked up a large sheet metal Procharger intercooler with 4" inlet/outlets. Do any of you guys run an intercooler with plumbing this big? I am trying to decide if I should just keep my 3" plumbing and use reducers in and out of it or if i should change to 4" after the ouput of it to the...