Search results

Hooker Supercomp longtubes, Aerochamber o/r xpipe, NEW King Cobra clutch, NEW Fidanza flywheel, Densecharger CAI, Steeda Tri-ax, Eibach sportlines, 4.10s, Mickeys with about 30 miles on them- never raced. Front bumper has some flaking paint, has typical rock chips. 100k service package done at...

The shop called me today, and they've finally got the car figured out. The base dyno was 232rwhp because of the slipping clutch. After my initial tune, the car put down 260 some, I can't remember exactly what because the sheets arent' here now. The shop and I both thought those...

Last season, my car consistently ran 13.6's at 101-102, with the occasional 103 and one 105, all in 900' DA with 90-100+ degree temps last summer. All the car has done to it for power is a CAI, o/r hpipe, and a catback. Last week, I took my car in to get some stuff installed and to get an SCT...

Does anybody make one? All I can turn up for 94-98 is non Cobra covers. I had a minor fender bender and it's cheaper and easier in the short run to cover it up so I'm not embarrassed riding around with spider webbed paint until I can save up $400 to get the bumper fixed right. Thanks in...

I'm about to buy a new clutch and flywheel from Summit, and I've decided on the King Cobra FRPP clutch. I want to get a Fidanza flywheel to go along with it, and when I search for flywheels for a 97, all it comes up with is this, which it says is for an 8.5-9.5 inch clutch disc diameter. I'm...

I have a set of Hooker Super Comp longtubes and the matching Aerochamber catless xpipe that I had for my 97. I never got around to putting them on, and I'm not entirely sure that I wanna even keep my car anymore, so I'm putting this out there. These are used pieces, non ceramic. I would be...

I've scoured the internet, and I can't answer my own question. What I would like to know, is how many cars where offered in 03 (and possibly 04 even though I've never seen one) had the tan inserts? That is the key requirement for me when I start looking for my car, but it seems like it's an...

I'm looking to see some pics of those seats in an 03 Cobra. I'm really thinking about getting some when I get my Terminator next spring, and I would like to see some shots to see how they match up to the rear seats. I know they will, but it would just be nice to put eyes on. thanks!

I am planning on buying a Terminator next spring. I want to keep my car as stock as possible, but I still want to get 450-500 rwhp. Would it be possible to achieve my goal with a 2.6 KB running about 15lbs with nothing but a K&N drop in, a conservative tune and maybe a catback? After having...

Ok, I am a fairly competent backyard mechanic, but I've never tried anything of this magnitude before. I am utterly certain that I could do the install myself for a bit less than the 700-800 a shop is going to charge me even if I buy tools, and I was hoping someone on here could give me some...

Could I run a pair of resonators along side of my mufflers on my catless setup to suck out some sound but not lose any power? Forgive my ignorance. :bash: lol

I need a new clutch, and while I'm at it I want to go ahead and put a Fidanza flywheel in my car, and on Ebay Gripforce is offering package deals at what seems to be a pretty good price, but I haven't seen any 10.5 kits from them. If I needed to, could I go to an 11 inch setup as long as I had...

I'm thinking about using my tax returns next spring to throw forged rods and pistons into my car, and get the valvetrain refreshed. It seems that a decent quality set of pistons, rods, and the required supporting hardware will run me about $1200, and I figure that a basic valve job will cost...

Well I made it out to KCIR today, and only got in one run. I had what was for me a very good 60' (1.92 on bald tires), but my ET was way off, it was only 13.73 at 100.5. Normally I'm running 13.3-4 at 104-105. Would the crazy heat we had in the first half of the day be accountable for that...

If anyone has one that they want out of their garage and will send me for the cost of shipping, you'll make me a very, very happy man. :)

Cars of all trim levels v6, GT, Cobra, whatever. I have to sell my green one, and when the time comes to get another Cobra, it'll be laser red. In the meantime, I'm gonna have a sixxer or a GT and it too will be laser red. What can I say, it's my favorite color! C'mon, I know ya'll have...

Ok, I have Hooker supercomp longtubes, a Hooker offroad x pipe, and Blowmaster 40s. Needless to say, my car is loud as fack, and annoyingly so. I'm tired of having to yell to my passengers. My question is, if I were to go back to a stock Cobra catback, would I lose any considerable ammount...

New in box, still in the original shrinkwrap, BBK underdrive pullies. I was gonna go n/a, but I want a blower. Pics on request. $90 to your door.

1997 Cobra. clean title 4.10 gears Offroad Hpipe FLowmaster 40's Steeda Tri-Axe shifter Nitto 555r Drag Radials Eibach Sportlines Densecharger full length CAI Radar detector hardwire MSD coils and wires I'm asking 8500 for this car, and that is less than I owe on my payoff...

I am torn between two options for supercharging my car, as both starting points for a project cost about the same. 1- Kenne Bell 2.1- I love the big fat torque of a positive displacement blower, but there is no way to intercool this beast, so it will always be behind the power curve of a...

Ok, I have a 1997 Cobra with 113,XXX miles on it. At 104,400 the heads came off for a headgasket, and every gasket in the motor was changed, it had a new timing set installed, and I had the heads and valves checked out, and much to my suprise everything was well within the limits. My intention...

http://cgi.ebay.com/ebaymotors/F1-RACING-Clutch-FIDANZA-Flywheel-COBRA-8-BOLT-4-6_W0QQcmdZViewItemQQcategoryZ33730QQihZ005QQitemZ150067557963QQrdZ1 As far as I know, all Cobras from 96-01 used the same clutch assembly. Is that true??

Ok, my car is a 97, and not a Terminator, but it has run a best of 12.9 at 106. I expect a bunch of BS flags now by putting that out there. :lol: Cliffnotes at the bottom. This story took place on Thanksgiving and the day after, I was driving my car up to Kansas from Florida, because I had...

What I'm hoping for here is that someone else will have a similar setup and can tell me what gear I have. I have the stock Borg Warner t45, 275/40z17 tires, and I am doing 3000 rpm's at exactly 70 mph in fifth. The car generally runs 13.3ish with upper 104's. It's best is a 12.9 at 106.1...

What I have here are brand new stage 3 Comp Cams n/a cams, the needed springs- Comp's top end "beehive" springs, as well as the needed stainless steel retainers. It's all there, and it would cost you $1800 from Comp. I want $1100 to your door. My DD died, so I bought a new one and I need...