Search results

  1. flynz

    WANTED: Go fast parts PayPal ready

    2003 Cobra parts wanted: LT or Mid length headers with mid pipe ORH or ORX for OEM manifolds Used or New Cat backs ( Bassani pref. ) JLT High Boost intake
  2. flynz

    Wheel fitment question

    just picked up a set of weld rts s77 finally but just noticed in ad it says 17x9.5 with 6.5 backspace 32mm offset... I think our cars call for 7.0 b/s and 42mm. Anyone running this set up with pics available or know if it will clear okay
  3. flynz

    Drag Radial input needed

    Picked up a set of polished pro stars 18x7.5 front and 18x10.5 rears and they came with BFG 295/35/18 drag radials and these things on top of looking very small and out of place just do not get traction like the 305/35/20 (28.7" tall) mickeys they are replacing. I'm torn at this point between...
  4. flynz

    Weld RTS on sale still anywhere?

    Hey guys and gals in search of a vendor that's still running the 20% off of the RTS line of wheels, I know I saw it pop up with one of our vendors over Black Friday? Anyone with a used set as well I'd be interested...looking for 17" rear and 17"+ up front that will clear 2013 brakes. I'd also...
  5. flynz

    e85 Fuel Filter, where to buy?

    I'm going to make the jump over to e85 from 93 and the one thing I keep reading is to stay away from paper filters. I'm looking at the 1300 injectors with the current non comp BAP installed, The car is a toy and will sit 4-6 days at a time so I don't want moisture to build and cause problems...
  6. flynz

    Anyone switched to VMP II-R?

    Really looking into doing this swap but cannot find any info on anyone with a 2013-2014 that has made the jump. Mod list in signature was good for 640 wheel on 93* (calibrated mustang dyno), if I do this upgrade would I need to jump to e85 running the same amount boost with the 2.4 upper only...
  7. flynz

    GT500 vs Z06

    Finally got a Z06 to run here in town after weeks of asking around. Good guy with a nice set up, H/C/I/Tb/e85+++ basically everything you can do to an LS7 minus pistons and crank, claimed a high 130's trap in 1/4 mile. I was on the factory 20's with drag radials. The second run in video was...
  8. flynz

    Need help with code troubleshooting...

    Just got my car back, 2013 GT500, from having long tubes and trunk mount IC res. installed and the wrench light has appeared but no CEL. Took her by a FORD store and had them pull the codes as it wont pull anything on the SCT X4 and they found: 1- IAT temp sensor different (1) reads 120 (2)...
  9. flynz

    Wrench light on but no CEL...?

    Just had a set of Kooks Lt's put on the car along with their ORH to replace the stock manifolds and Leathal ORX, at the same time they installed a non adjustable BAP and trunk mount IC tank to replace the tiny one under hood. Driving home the Wrench light is on but no codes or CEL and the car...
  10. flynz

    Tune Question...

    So I finally made the plunge and ordered the Kooks LT's with their ORH mid pipe. At the same time this is being installed I opted to have the PNR trunk mount 7 gallon IC tank as well as a non adjustable KB dual BAP installed. The car went in already having 2.4 upper, 123mm CAI, ORX, and various...
  11. flynz

    Engine Bay Cleaning... Safest way possible?

    Just as the title reads need help so I don't open a can of worms. Have been wrenching on the car lately and see the grease and grime build up around the bay on the block and blower so how do you guys clean these areas up without drenching the electrical system or anything else or am I just being...
  12. flynz

    Most disappointing car I've owned to date...

    I need some help guys and gals... I recently purchased my 2013 gt500 and have done to most basic bolt one any of us would start with and keep having nothing but cooling issues. At this point I am at an upper pulley, filter and orh with a Lund tune. First time went to make a pull in the car...
  13. flynz

    Want to buy a few common things for 13' GT500

    2013 GT500 looking for: Aftermarket heat exchanger set up with or without fans, both coolant tanks no preference on finish, lowering springs and panhard bar, mgw shifter. Send me what ya got and let's make a deal!
  14. flynz

    Steeda sport springs v8 coupe mustang used

    These have been on my 2012 gt for over a year now and about 20k worth of daily driven miles. To me these rode much more like stock than the Eibach Sport kit that is now installed. Just wanted a different stance so i switched these out. $175 shipped in US Beginning Year: 2011 Ending Year...
  15. flynz

    TSW Carthage $700 FULL SET

    Wheels have about 10k on em, no curbrash or problems at all, just want to try out a black wheel. 19x8.5 fronts and 20x10 out back, these will clear Brembo's. WHEELS ARE OFF AND BOXED UP!!! >>>THE BEST WAY TO CONTACT ME IS ON MY CELL PHONE (210)260-0524<<< Price: $700 plus ship lowered...
  16. flynz

    TSW Carthage

    Wheels have about 10k on em, no curbrash or problems at all, just want to try out a black wheel. 19x8.5 fronts and 20x10 out back, these will clear Brembo's. WHEELS ARE OFF AND BOXED UP!!! >>>THE BEST WAY TO CONTACT ME IS ON MY CELL PHONE (210)260-0524<<< Price: $700 plus ship lowered...
  17. flynz

    TSW Carthage

    Wheels have about 10k on em, no curbrash or problems at all, just want to try out a black wheel. 19x8.5 fronts and 20x10 out back, these will clear Brembo's. WHEELS ARE OFF AND BOXED UP!!! >>>THE BEST WAY TO CONTACT ME IS ON MY CELL PHONE (210)260-0524<<< Price: $700 plus ship lowered...
  18. flynz

    19/20 TSW Carthage STAGGER SET!!!

    Wheels have about 10k on em, no curbrash or problems at all, just want to try out a black wheel on the car because some numb nuts thought it'd be cool to just straight copy my car here in town lol. 19x8.5 fronts and 20x10 out back and yes these will clear Brembo's. THE BEST WAY TO CONTACT ME...
  19. flynz

    19/20 stagger set tsw carthage

    Wheels have about 10k on em, no curbrash or problems at all, just want to try out a black wheel on the car because some numb nuts thought it'd be cool to just straight copy my car here in town lol. 19x8.5 fronts and 20x10 out back and yes these will clear Brembo's. THE BEST WAY TO CONTACT ME...
  20. flynz

    19/20 TSW Carthage

    Wheels have about 10k on em, no curbrash or problems at all, just want to try out a black wheel. 19x8.5 fronts and 20x10 out back, these will clear Brembo's. WHEELS ARE OFF AND BOXED UP!!! >>>THE BEST WAY TO CONTACT ME IS ON MY CELL PHONE (210)260-0524<<< Price: $700 plus ship lowered price...
  21. flynz

    2012 Mustang GT Brembo Hid Extras

    Time to buy a house need to get rid of the debt sale... THAT BEING SAID^^^ NO TRADES ONLY BUYERS PLEASE 2012 Mustang GT Premium M6 Brembo HID 36K mostly hwy miles. Car is daily driven 52 miles round trip 6 days a week avgs 26.8 mpg. Interior: Black Leather white stitching on seats and st...
  22. flynz

    12' gt vs. Bmw m5

    Cant get vids to embed i give up... see Tboulda youtube page mods please delete thread.
  23. flynz

    Wanted: Powered by for emblems

    PM if you have em, not the fake ones from AM the real deal big ones. :beer: Trey
  24. flynz

    OEM 12K mile old 3.73's

    SOLD TO DEEPBLUE13 10/22 3:50pm Just switched to 3.31 for better hwy mileage as thats all of my driving. gears never had whine or any problems. PRICE: $100 + S&H
  25. flynz

    Brembo wheels with 2 tires no tpms

    Up for grabs are my used set of Brembo GT wheels. Pulled off the car with 15K miles very good condition with only 2 blemishes that you have to be within 1 foot or less to even see, looks like a rock chip on the spoke. There is NO CURB RASH at all. Two used pirellies not too bad after taking a...

Top