Search results

Selling the driver side airbag from my 04 Cobra, if wanted as the pair I can remove the passenger side as well along with the module. Nothing wrong with any of it just do not need them with the cage, seats and harnesses. Looking for $225 shipped for the driver side only. If you want...

I've searched both on here and google and found nothing about it. I put the sensor in the lid of the 03-04 Mach 1 Intake (similar location to Hellion's instructions) but the connector is still 3-4 inches away. I have not seen anywhere that the wires need to be extended, but, I've tried pulling...

Selling a whole bunch of stuff from my Cobra, switching to a single turbo setup so everything must go. There are absolutely no issues with anything, car is running and driving right now with zero issues. Gen 6 2.3L Lysholm blower with Whipple inlet and intercooler outlet, around 7K on the...

Finally got a chance to get the car on the dyno today. First off car runs on straight 110 octane leaded race fuel (Cam2) and for some reason it was just bellowing out orange smoke. Almost like it was extremely rich only with orange smoke (was lean at first then corrected). A/F was dialed in to...

Up for sale are my front and rear seats out of my 2004 MystiChrome Cobra. I debated just letting them sit around but they are just taking up space and since I am installing a cage finally I don't see them going back in. These seats are definitely not perfect and I will be as up front as...

Selling my 40 amp KB Boost-A-Pump that I used on my Cobra for a while before switching to a return system. I hardly drive the car so it's hard to say how many miles it has on it, it never gave me a single issue though. As you can see from the pictures it's still in great condition. Looking...

Selling a perfect condition Egnater Tweaker 15W head, I bought this back in December sometime and have had a blast with it, very versatile head! Right after buying it I ordered a set of JJ preamp and power tubes from Eurotubes. Power tubes are JJ 6V6's and the preamps are JJ ECC83S's, there is...

I've got an Edge Racing Converter "Pro Edge" for an AOD with a J&W bellhousing or similar aftermarket bell. Converter is a 9.5" splined for 31 spline C6 style input shaft (standard on most built AOD's) with my setup was stalling around 4200 RPM's. The "Pro Edge" series is custom built for your...

I need a stock 03/04 stock hat basically just to use as a cover and for fuel level. I was switching to a fuel cell but finally decided against it. Could use one ASAP, with or without the fuel level sender but preferably with the gasket. Let me know, have cash in hand ready to buy (one...

I used to have a MAC catback when my car was a six speed and I loved it. I have Magnaflow now with an O/R X, I like the sound but at low RPM's it sounds to close to glasspacks at times. I was curious if anyone has any videos of their AUTO Cobra with a MAC catback. I kinda wanna hear what...

I've been searching for the video and can't seem to find it. It's a T/A not sure what he's racing but the passenger is out the window with a paddle rowing. It's hilarious and I saw someone with a gif recently but I can't seem to find it. Anyone know what I am talking about?

I have had it for around a 1 year, has Vista Home Premium, 3gb of ram. Nothing wrong with it but I bought it to use it for work and now have a laptop supplied to me so there is no need for it. I paid just over $800 for it from Best buy all said and done. This has a HDMI output for High...

I sold my 04 MystiChrome and now I've got a black 1994 GT that is getting a COMPLETE make over!! I can't decide what wheels to go with and even what size to go with. Take in mind this is going to be drag setup car so I'm not going to lower it this is why I'm thinking about going with 18's but...

For a 03/04 Cobra, Just rebuilt by PA and charges GREAT. Decided to upgrade to a 200 amp so i have no use for it anymore. It comes with a Metco 3.7" alternator pulley. I'm asking $160 shipped. PICS BELOW!!!

Like the title says, Anyone know who's it is or at least what exactly it's got done?? I know it's N/A but what the heck is done to it, it's just NASTY!!! http://videos.streetfire.net/search/corvette/8/88e9cf6c-9c48-4ce0-803f-49c851bf28ca.htm

I have a HUGE nitrous kit for sale, it is a pieced together kit that i have had GREAT luck with. It consists of the following: 2 Cold Fusion 550hp nitrous solenoids ($150 a piece new) 2 Cold Fusion 650hp fuel solenoids ($100 a piece new) http://www.nitrousdirect.com/solenoids.html...

Brand new still in wrapping CPR fuel rails for a returnless style fuel system. Brand New they are $379 I will let them go for $310 shipped. http://media.putfile.com/CPR-fuel-rails

For Sale: 1995 Mustang Cobra (real one, not a clone), Black, Tan Leather, Cobra "R" Hood, 96-98 "Cobra" Rear Bumper, Replica Chrome Cobra "R" Wheels, Kumho Ecsta 712 Tires (Less than 2000 miles on all 4), Rear End Rebuilt October 2005, Newer Tremec 3550 Trans. April 2005, Complete...

I've had it for about a month now and just don't ever play it. I paid $650 for it with one game. I now have 3 games along with a wireless and a wired controller. It's got a 12 gig hard drive with all the updates. I've got Project Gotham racing, Socom, and Fight Night. It's also got all the...

I've got a 2004 MystiChrome Cobra for sale. I drove the car to and from school for a year so the miles are a bit high at 28,000 miles but about 16,000 of those miles are ALL highway miles. Mods are as follows: Add: professionally done 5% on all windows but windshield. There is a 5 inch strip...

I've got a complete (MINUS BOTTLE) Cold Fusion direct port nozzle kit (pieces fit in injectors boss and the injectors fit into the nozzle) This kit WILL fit 03/04 Cobra as the lines bolt on at an angle instead of straight like N.O.S.'s kit. This kit brand new with NO bottle was $900...

Exactly what title says, comes with a stock inlet. Eaton is of a 04 Cobra with a 2.8 upper pulley on it. Blower has 14K miles on it (replaced it with a ported Eaton) $300 plus shipping OBO!!

Like the title says, my buddy is looking for a wrecked (NOT TOTALED) 03/04 that he can pick up for cheap (like 18K or less) ONLY COUPES! Let me know what you got as i am trying to help him find one. Thanks

I've got a Steigy Stage 3 ported blower and inlet along with a Billetflow 2.93 pulley and a stock blower and inlet. Looking to possibly trade plus cash or even buy out right if the deal is right. Both blowers are in PERFECT shape. I have pictures of both. Either a 2.2 (if it's the newer...

Blower has 14K miles on it and has been pullied since 4000 miles and comes with stock inlet. Still in perfect shape and spins freely. Has 2.80 pulley still on it that will come with it. I swapped out for a ported Eaton so i have no use for it anymore. $450 SHIPPED!!!