Search results

I dynoed the Cobra yesterday to see what kind of numbers she would put down since I had the blower ported. The car made 503rwhp & 504rwtq in 97f+ degree temps. :banana: I want to get opinions on what to do next.... If I were to go twin screw would I just need injectors and a BAP/GT pumps...

So I went to the track last night and it was terrible! Besides the fact that my nittos weren't hooking at all and it was 95 degrees outside, my tranny was also acting up.:bash: Every time after I did my burnout and staged up my tranny would get really stiff and not want to go into gear. Going...

I went out to the track and made a total of 3 runs. My 1st run I was running with 35psi in the nittos :kaboom: and bogged hard on the 1s run. My 2nd run I missed 2nd gear so that run was wasted. Then finaly on my last run I made a clean pass. Nitto's had 18 psi and I did a 3 sec...

Could anyone please put these rims: Onto this car: I got a new comp and unfortunatly I havent gotten PS on it yet, so if anyone has a chance I would appreciate it. :beer:

I replaced my clutch and pressure plate with the Centerforce DF 10 spline kit. I resurfaced my stock flywheel and I replaced the TOB, and added the fire-wall adjuster, quadrant, and free-play kit. Now 4k miles later my TOB is squealing like a mother ****er again!:mj: I'm sure the clutch...

I would like to trade my Mac o/r Prochamber mid-pipe which goes with stock headers for either a Maggie X (catted or uncatted) or whatever else you got. (MRT, Bassani.. ) I'm open to all offers. The Prochamber has 2,000 miles on it. It is good working order just has a few surface scratches from...

Ok so here is ths story. I Dynoed back in April 2005 with the following mods on a Dyno-Jet, here is the sheet with STD Numbers: 2.80'' Pulley MAFia Predator-Tuned by: AMAZON RACING Magnaflow C/B K&N FIPK MGW Shifter (Disregard that A/F that was when Rick was first begining...

Alright my South Florida people the temps are dropping and the tires are spinning, it's the perfect time of the year to dyno your car! D'AGASTINO Racing in Davie Florida www.dagostinoracing.com will be hosting a group Dyno day on: FRIDAY DECEMBER 8th Starting at 10am. It will be $50...

Alright my South Florida people the temps are dropping and the tires are spinning, it's the perfect time of the year to dyno your car! D'AGASTINO RACING in Davie www.dagostinoracing.com will be hosting a group Dyno day on: FRIDAY DECEMBER 8th Starting at 10am. It will be $50...

http://www.svtperformance.com/forums/showthread.php?t=334764 Here is the link in the Market. I just wanted to post it here because all of us SD boys check here the most :thumbsup: Just remember this tuner works only with 2006 Trucks! Pm me for more details or interest! Thx bros

I have a Superchips Tuner for a 2006 Superduty 6.0L diesel. :rockon: This is the model 1706 tuner that will work ONLY on 2006 Trucks. It is a simply plug and play tuner with 3 diffrent settings. It saves the stock file and applies either: 1. Economy Tune 2. Tow Safe 3. High Performance...

Ok here is yet ANOTHER custom plate question. I have it narrowed to 5 that are not but I cant decide on which to get? Her is a pic of my car just for see what flows with it: I really like "Evil 04" because it's the only one not abreviated.. but I really cant make up my mind :bash: So...

Ok so I went to jump my H/E pump the other day and I attached one end of the wire into one side of the plug and the other end of my jumper wire accidently touched a bolt on the car and created a spark. I belive now that I grounded the pump because it doesn't work at all. :xpl: I tryed using...

Just got back from seeing the Midnight showing for X-3 and it was AWESOME!!! Defiantly one of the best action movies ever. I've always been a huge X-men and seeing these movies come together like this is badass. The plot I thought was played out perfrctly and the acting was really good...

I currently have the MGW red handle installed on my car (for about 3k miles) and I was wondering if anyone would like to trade me for either the MGW blue, or orange handle. I thought the blue would be too short but after driving my friends car with it I see that it would be fine for me...

So my friend just got a 10lb procharger set up on his 2000 Gt and he wanted me to take it out and see what it could do. Its got a Steeda Tri-ax as the only driveline mod, stock clutch and all. I took the thing out and I was just ripping through the gears no problem! I was powershifting every...

My friend recently installed a PSC1 Procharger kit with the 10lb pulley on his 2000 Gt along with all other supporting mods (Injectors, MAF, Pumps...) He had it all done and had it tuned at this local shop (bad idea) here is the sheet from the first dyno tune: His numbers were way low...

My friend recently installed a PSC1 Procharger kit with the 10lb pulley on his 2000 Gt along with all other supporting mods (Injectors, MAF, Pumps...) He had it all done and had it tuned at this local shop (bad idea) here is the sheet from the first dyno tune: His numbers were way low...

ok first off it's not for me it is for a friend of mine who rencently installed a Procharger kit on his '00GT. He's running the 8lb pulley with all supporting mods ( Intercooler, 42lb injectors, MAF, Pumps...) He doesn't even wanna run the Procharger chip in it because we all know canned tunes...

To bad it's not mine! Went out tonight to see my friends new motor finnaly installed in the car. The car is a '68 Camaro and the new motor is a 524ci Big Block. The new set up includes aluminum heads along with a direct port nitrous system set up for a 500 shot. He's still got a few things to...

Took it with my camera the other night, I purchased the car in Sept. '04 and now hit 7k miles: While Im at it I also hit 5k miles in the '06 F-250 purchased 8/05: While Im at it here's a pic of me topping out a '94 Ranger: Oh well Im bored and thought I would share :thumbsup:

Ok so here is the story http://www.svtperformance.com/forums/showthread.php?t=262747 There was a major power steering leak that had devolped with my car and was just making a mess everywhere. That plus my fog light switch went out and my fog lights wouldnt work at all. So I made an...

Power Steering Leak WTF? *PICS* So yesterday morning I noticed that after I started up my car and was backing out of my garage there was a real nasty screaching sound. I immediatly know it was something steering related cuz it only happend when i turned the wheel. I got outa the car and check...

Guys Im getting massive amounts of belt slip and Im pretty sure its my belt. Here are some pics of how much wrap I'm getting and how tight my belt sits: You guys think I need a new belt, some new idlers or is my idler not set tight enough?

Might not be something you're thinking about right now, but no one knows when it could be there time to go... :shrug: I was thinking about this the other day and I narrowed it down to 3 songs I would want played during my service: Pink Floyd's "Comfortably Numb" Ozzy's "I just want you"...