Accufab built an engine for a Ford GT (twin turbo) for a customer, Ray Hoffman, and Heffner Performance installed it in the car. Ray sent a private plane to pick John mihovetz up last Thursday and fly him to Miami to do his "MoTec Magic" on the car for the Miami Mile (standing start for a mile)...
Forged crank forged h beam rods and forged pistons .. 5 angel valve job on heads and ford gt cams installed with valve springs setup for them and up to 25 psi boost complete asembled long block with stock blower fuel rails and injectors.
I also have the ford efi system complete brand new...
stock crank .. aftermarket rods and forged pistons .. 5 angel valve job on heads and ford gt cams installed complete asembled engine minus the ac power steering, valve covers and alternator.
comes with the stock blower
includes the stock fuel rail and injectors.
I also have the ford...
wow what a pile
ran across a yello henessy superchared 2010 camaro in a 08 gt 500
Every singel time he shifted it over 2500 rpm it would back fire like hell .. i dont mean a exhaust burble i mean a omfg what idiot tuned that car back fire BANG.
I must say the guy driving it < probly...
we took this 1969 camaro down nut and bolt and did a full reso mod build in 60 days.
some work as its being performed.
powder coated subframe
the front subframe installed with brakes and the painted fire wall
the under side of the car is fully body worked and painted as the top is...
big bore ford motorsport boss block
all the best parts
custom pistons by JE not off the shelf units with taper wall tool steel wrist pins and custom ring lands
pistons are custom for a 3v with big cams but will work fine with a 4v with stock cams or mild cams.
eagle 4340...
big bore ford motorsport boss block
all the best parts
custom pistons by JE not off the shelf units with taper wall tool steel wrist pins and custom ring lands
eagle 4340 stroker crank shaft
eagle h beam rod with arp 2000 rod bolt up grade
the short block was...
bought this car off a auction it was slid into a curb bending two wheels and messing up the passenger side skirt..
the complete repair involved was as follows
new passenger side skirt
new irs cradle < bushing was torn in stock one so i got new unused one from ebay from panoz motorsports...
got a few things done finished up the drive by wire pedal mount, the passenger header, the motor and trany mounts, the radiator overflow and hose setup < it uses all stock 500 hoses so replacement parts will be easy > , finished up the master cylinder mount by making abillet plate to move it out...
the engine
the front suspension hiedts ifs 2 with coilovers and wilwood 12 inch polished caliper brakes all powder coated in silver vein
The rear suspension going in. also powder coated in silver vien
\
forgive the areas that look white or dirty thats some run off from the...
horsepower freeks bmw m3 turbo 700 + rwhp
he got a good jump because i couldnt hear his horn so i didnt get on it till he had a good car rolling start
he pulls me through third while im spinning i stop the pull at the end of third when i hook up then he puts another car when i shift...
hmm well lets see i got a 2500 horsepower engine ...
and i do have a mini tubed 66 mustang that will fit a 15 inch wide drag radial and weigh about 2750 pounds with that motor :)
anyone know of a standard that can take 1600 + rear wheel torque and 1900+ rwhp :) prety sure it would destroy...
im building a 325 big bore stroker and switching to a 3.3 whipple on my 05 so im selling my kb kit
Kit in cludes over 2000 in custom aditions
Sheet metal rear intake custom big bore inlet tube with 115 mm mass air
also will come with customers choice of boost levels 10-12 being all i would...
--------------------------------------------------------------------------------
im building a 325 big bore stroker and switching to a 3.3 whipple on my 05 so im selling my kb kit
Kit in cludes over 2000 in custom aditions
Sheet metal rear intake custom big bore inlet tube with 115 mm...
Thats only a 29 psi pull the turbos capable of a easy 34 -35 on this setup
Thats aproximatly 2300 horsepower at the flywheel loose converter turbo 400 auto.
and yes its still on radials.
so im sick of no way to realy realy keep the heat under controll during heat soak. bigger heat exchangers .. bigger water tanks.. its all band aids and real world temp reductions will still only = maybee 15-20 degrees from those.
solution? METH between the blower and the intercooler where it...
well sort of .. my fault for not verifying the car was runiung right before i took it out..
bad coil packs were causing horrible spark blowout and backfiring in third and fourth you can clearly see it doing it in the vid but oh well i kept running anyway.
You can see the car pull like a...
Power no other way to describe it.
This 2006 mustang has been in two magazines and was built prefesionaly for one purpose to be one bad mother of a street machine.
Starting from scratch the entire drive train has been replaced and upgraded.
Starting with a teksid cobra block the...
well no one can aford the car whole and my wife likes it so im goign to aprt it..
im puting a stock motor back in it with cold air and a cam for her to drive
So
i have the folowing for sale
1 engine.
boss block 331 stroker in perfect condition .. made 750 rwhp and 780 rwtq at 19 psi...
one bad cobra and gt-500 killing 06 mustang
Power no other way to describe it.
This 2006 mustang has been in two magazines and was built prefesionaly for one purpose to be one bad mother of a street machine.
Starting from scratch the entire drive train has been replaced and upgraded...
http://blogs.musclemustangfastfords.com/1010040/mustang-news/muscle-mustangs-fast-fords-street-stick-shootout/index.html
i made it in with my 06 mustang.