Search results

I like the looks of the previous generation better. The new headlights and grill are too soft and plain.

bump

Bump.

I could see that being an issue, but for sure the temperature rise inside the case is causing positive pressure inside the unit. Perhaps the vented plug would also help alleviate the "stack up" as you mentioned. ( I don't know why my photos posted twice, sorry about that) The Vortech one is PN...

It seems that Procharger doesn't need to respond to people that have already given them their money. I had issues with a couple of the parts in my kit and they never respond to emails , voicemails or phone calls. I've seen others online that have had seals leak due to positive pressure inside...

Hello everyone, I have some like-new parts for sale that I recently took off of my 17' GT. I installed a Procharger so I no longer have any use for these parts. All of these parts were on my car for less than a year, and only about 1500 miles. OEM Fuel Pump Bucket with Deatchwerks DW400...

That particular controller (Devil's Own) used constant power from the battery, and would complete the circuit through ground when the ignition was switched on. I also used an AEM controller afterwards and never had that issue again.

Yes it did, however I was asleep when it happened. Car was off, keys were on my dining room table. The controller short circuited internally and energized the pump. Bad day. After that, I put a manual check valve inline and would always close it after I put the car in the garage. Water/meth...

I

Not to revive a dead thread, but I had one of the nightmare situations that others have mentioned happen to me. I had a Mazdaspeed3 and was spraying meth just for the cooling benefits, not relying on it for fuel headroom, anywho, one night the controller decided to fail and the system sprayed a...

Poke your head underneath the dash and see if the clutch switch is unplugged.

Even without Procharging the 18', it is far superior to the S197's. The motor is much more robust, it has dual fuel injection, and the handling is no comparison. Alot of people prefer the looks of the S197's, but from a performance standpoint, they aren't even close. Not to mention the 10...

Just thought I would follow up on this. I went down 1 size pulley to a 3.4". at 7200 RPM, I am seeing 8.3 PSI. At sea level this would be somewhere around 13 PSI. With the P-1x, OEM Harmonic balancer, and this 3.4" pulley the blower is spinning at 61,319 RPM at 7500 RPM which is basically...

I

Thank you, I didn't factor that in. I've only ever had Turbo cars before, and the Wastegate operation is based on actual pressure so the turbo will simply spin harder to achieve desired boost. (Provided it isn't mechanically limited) I guess since the Centri's are only ever going to be spun as...

Thank you Norton, That is the general consensus across a few other forums I have come across as well. My logs don't indicate a boost leak or belt slip, so I guess I just need to pulley down a bit.

I posted this in the "Taste of Home" forum as well, but maybe this is a better choice. I have recently installed a Procharger on my 17' GT with a P-1x headunit, and a 3.5" Pulley. I live in Colorado and was wondering how much boost loss others at this altitude are seeing? I was under the...

Hello All, I have recently installed a Procharger on my 17' GT with a P-1x headunit, and a 3.5" Pulley. I live in Colorado and was wondering how much boost loss others at this altitude are seeing? I was under the impression that the 3.5" pulley would be good for somewhere around 12 psi at sea...

No, you can return to stock. This was a problem with the BDX device looking for the Firmware on the SCT Server, for vehicles that have custom tunes on them. SCT has since resolved the issue, (or so I am told). If you are in the middle of a custom tuning session, wait to finish the tuning...

Oh one other thing I forgot to mention and maybe you are already aware of this- pushing 800 HP on E85 with only a BAP is very risky business. At a bare minimum I would recommend replacing the in-tank pump with a DW400 and using the BAP, or the much better option of running a return system. I...

The boundary set is $298 from most places, so he must be charging you a shitton for labor. Too bad you don't live closer to me, I would do it for 500. It really isn't that difficult, just a bit time consuming. Simple hand tools is all you need and a space to work and you could do it yourself...

Sir, how long does it take once my payment has been posted for my Premium membership to be active?

Why not just do it and sleep easy at night? A few hundred dollars to protect your 20k build seems like a no brainer to me.

I know that my Local Ace Hardware has a slider shelf that has every conceivable size of O-ring. Maybe you could just mic. the current ones and match them up?

I'm curious to know how much pressure is actually building inside the case, especially on cars that are being raced and the temps are very high. Even with just spirited driving for an hour or so, the Procharger gets so hot that you wouldn't want to touch it. I assume the seals can withstand a...