Not sure if his should be here or in the terminator forum...
99 Cobra, did the eaton swap. Used all OEM 03/04 Cobra parts in the process. Car is tuned and all, did 450rwhp @ 8psi.
Im getting oil accumulating in the "V" of the timing cover just below the water pump. I removed the valve...
Finishing up my eaton swap and have a few things id like to purchase...
First, there are two threaded studs that attach the bridge to the timing cover. They are in the upper corners and I need both of them..
Second, I need the IAT sensor and connector. If you have something used, I'm...
Im working on finishing up my Eaton swap and in search of the upper idler and bracket that bolts just under the nose of the blower. It takes the place of what used to be my alternator on the NA blocks.
Also need the hard coolant lines that go on the passenger side of the timing cover for the...
So im going to be using the stock 01 ecu and harness. Stock 03/04 maf and injectors. Local tuner is telling me that the 01 ecu is "50% slower" vs the 03/04 ecu which he says could be an issue at higher levels. I've seen many people use the 01 ecu without any problems. Converting to the 03/04 ecu...
Still looking for the following:
oil cooler/adapter
Thermostat housing and hoses
hard lines for heat exchanger that bolt to side of timing cover
EGR pipe
pcv lines
vac solenoids for side of blower
throttle cable/bracket
crank pulley (harmonic balancer)
intercooler adapter with nipples...
This is my first "newer" Mustang. Car is a 2001 Cobra, 80k miles. Im the second owner. First owner had the clutch done at 50k. Put in some retarded "Performance" clutch but needless to say it was done wrong. The clutch was slipping and pedal feel was not right when I bought the car so I ordered...
Gathering up parts to do an Eaton swap on my 2001. I currently have the blower, lower manifold and the pulley for the blower. Looking for anything and everything in-between.. Let me know what you have please!
Just like the title says. Im looking for eaton swap parts. So far I have the blower, pulley and lower intake manifold. Let me know if you have anything else for sale.