Well I think what they did was used the gasket from the metal imrc C which was a hard plastic gasket. Apparently the gasket for the plastic imrc is soft rubber so they packed the groove for the gasket flush with silicone so they can use the wrong gasket I think that's what happened but I do know...
Also which of the imrc plates are the better ones the plastic that are on my 98 manifold or the metal ones that are on my 96 manifold? The plastic one seems impossible to clean the silicone off of. And what is the story with that Groove going all the way around it silicone is packed into
Sent...
So what is the best way to clean out the inside of the lower intake manifold? It's kind of nasty down there from what I can see with a flashlight. I just don't want to take the risk of any silicone being left in the manifold from removing the old gasket. I also do not want to remove the imrc...
So at this point I've changed the dash harness and ECU harness to match my 98 motor and 98 motor harness car still a 96 I've tried both 96 and 98 ecu's. I still can not get the car to run I've also put in a set of 98 gauges. The car will idle for about 2 seconds and stall using the 96 ECU and...
So at this point I've changed the dash harness and ECU harness to match my 98 motor and 98 motor harness car still a 96 I've tried both 96 and 98 ecu's. You can still not get the car to run I've also put in a set of 98 gauges. The car will idle for about 2 seconds and stall using the 96 ECU and...
So I'm in the process of doing a 96 to 98 Dash and ECU wire harness swap. I found this on my floor and I have no idea where it goes what it is what it does. Doesn't even look like it's able to plug into anything at either end has Ford part number E5DB 14489 AA can you identify this harness...
Well just finished taking the dash out. So I guess I need the dash harness and ecu harness now and a gauge cluster for a 98
Sent from my SM-G900V using the svtperformance.com mobile app
Anyway I could get those diagrams from ya? 97 should be the same as 96 which is what my base is [96 4v] so diagrams for 97 and 98 should help
Sent from my SM-G900V using the svtperformance.com mobile app
I have the 98 engine harness that came with my motor and the ecu for it too. I just need the dash harness.
Sent from my SM-G900V using the svtperformance.com mobile app
I just figured if it matches the ecu and the engine harness plug 100% how could it not help. I mean if not that's 250 bucks I could invest into something else.
Sent from my SM-G900V using the svtperformance.com mobile app
Ok i appreciate it. Im wondering if i should hunt down a 98 ecu harness to meet the 98 engine harness. Found one for $250. But im wondering if it would help any. I just dont want to cut any corners. If theirs a chance that injector 7 pin goes somewhere else i cant risk that. If its a matter of...
Looking for a Ecu harness from a 98 4v. Its the harness that runs from the ecu through the firewall to the engine harness. Have one? Message me please.
No CEL as of yet. Is it pined different at the ecu or at the firewall on the motor harness?
Sent from my SM-G900V using the svtperformance.com mobile app