Search results

Hey all looking for a new tire to try out on my turbo cobra that should be done early May. I have a deep dish 03 cobra wheel out back 17x10.5 and have previously tried the Hoosier 335/35 drag radial and wasn’t super happy and using M&H 325/45 that work better but there a little to tall and had...

Going turbo and in the process of removing my ARH long tubes … k member is out and the passenger side top bolts look impossible to get out . Any tips on getting these out ? Soaking them in PB blaster over night so they break lose easier.

Before I buy new looking for a tial 44mm wastegste and a tial 50 mm bov for my CG fab turbo kit.

Got a couple parts laying around I am trying to get rid of to fund my turbo project. Located in north Texas about an hour north east of Dallas. Will ship as well. Stock manifolds- $125 Belstein shocks (about 15k use)- $100 Rear calipers - $100 3.5 whipple pulley- $70

Looking for an 01 cobra coolant crossover for my turbo build. Thanks

Hey all trying to remove the lower crank pulley from the car . I am aware it is reverse thread so no issue there … I have tried a breaker bark with a 4ft piece of pipe to brake it lose with no luck. I tried having someone pull on the breaker bar while smacking it with a large hammer and it...

So swapping to a CG fab twin kit this summer and going to need a tubular k member set up with coil overs. I want the ride quality to be good … years ago I had a upr setup and I was not super thrilled with it regarding the coil overs since they made a lot of noise. Was curious what yall use and...

Gonna be listing my 3.0 whipple for sale of my 03 cobra … has about 500 miles on it … was curious what these go for used as I have not seen any for sale. Thanks

Looking to get a drag setup for the cobra … anyone have a pics of wheel setups? … I have a torch red looking to keep the wheels black … thanks for any pics or advice.

So on the fence right now of keeping my 3.0 whipple set up or going with a twin turbo kit … if keeping the whipple I want cams as the next mod.:. Was looking at the MHS stage 4 blower cams … my car currently makes 760 rwhp and 670 rwtq on 24 psi … this is a stock motor with 23k on it and street...

So selling my 3.0 whipple for funds for my turbo build . Just curious from the guys who have done the swap or have experience with it . Single setup or twins ??? This is just a street car with little to no track use and keeping the 6 speed in it … would like to do a half mile event once a year...

Hey guys so just recently found out I have a hole in my Hoosier drag radials on my cobra. Tires are 335/35s with rolled fenders and a small spacer for insurance. Had no issue with these far as fitment. Just recently bought a set of 315/55 MT”s street Rs from summit racing. Probably should...

Hey guys looking for some advice and experiences with people that have sold their 03 cobra to purchase a gt350 . I currently have a torch red 03 cobra with 22k on it , 3.0 whipple and full E85 making close to 800 Rwhp. As I enjoy the power of the cobra sometimes I wish I had something with...

So thinking about making the switch from the 3.0 whipple to a f1a procharger. Growing old of it and wanting something different . Came across Kornfeds f1a set up from years ago on here . I love the sound of these blowers and enjoy the mid range to up top pull of them . Just seeing what peoples...

Hey guys I currently have an 03 cobra with lethal return fuel system running e85, arp head studs , stock long block with 21k on it and a 3.0 whipple. Car currently makes 760 Rwhp and 676 rwtq at 23 psi. I am looking at doing the on3 twin kit and curious about peoples expierecne going from a...

For sale I have a set of like new rovos wheels in 18x9 in front and 18x10 in the rear. They came on my 03 cobra I bought a couple of weeks ago and I am not the biggest fan of them. They have brand new tires all around with less than 100 miles on them. Mickey Thompson ET Streets SS 305/35 on the...

Looking for a set of clean black 03 replica wheels for up front in a 17x9 with or without tires is fine just don't want anything that is beaten up or scratched. I am in the north dallas area thanks.

Hey guys so recently bought a pretty nasty 03 cobra . Has a 3.0 whipple on E85 with over 700 Rwhp. Right now the car is sitting on 18x9 rovos wheels that I am not a fan of and I am looking into getting black deep dish 03 cobra wheels with a 17/10.5 on the Rear . My question is what tire do...

For sale I have a couple stock parts from my low mileage cobra . Stock fuel pump, ECU, shifter, and fuel rails. If these prices aren't reasonable let me know and we can work out a price. Thanks Fuel pump $250 Fuel rails $50 ECU $200 Shifter $50

Hey all looking to buy a modded cobra in the price range of 25k. Possibly higher for the right car. Looking for something modded, upgraded blower , drivetrain , suspension etc. No convertibles not to picky on the color as long as it catches my eye. I am located in the Dallas area but...

As the title says, I am looking for a BAP for my cobra. Please let me know what you have thank you.

I have a 2v with a built short block and stock cams and heads with a v2 s trim head unit. I am thinking about adding the Snow stage 2 boost cooler with VC-50 gauge for boosted octane to make more power with my car. The car does have a tread stone FMIC and a 3.25 blower pulley. I am wondering...

So I am wanting to remove my vortech V2 head unit to send out, to get upgraded. I did not install the kit and have no experience doing so, but have some mechanical ability. So my question is, how difficult is it to remove the head unit. Its on a 99 2v gt. Thanks

I recently did the cobra brake upgrade on my 99 gt... I bought brand new cobra calipers and new 13 inch stop tech drilled and slotted rotors. While driving it has made a grinding noise and later found out its the pads touching the rotors... the car drives fine, there's no smoking or over...

Does anyone have experience with UPR Rear Double Adjustable Coil Over Kit ? I have Upr's front coil over kit and I am pretty happy with it and the ride quality is pretty good... I am curious how the rear would be with there set up.... just want to lower the rear of the car so it looks even with...