Yes I data-logged several times as this is supposed to be a custom tune but whoever I’m dealing with over email says they won’t chase the issue with ghost cam whatsoever, which is crazy because there disclaimers says they won’t chase driveability issues or make it chop more, it doesn’t say they...
I have a 1954 f100 that has a gen 1 coyote out of a 2014 f150 in it with the ford control pack. I recently purchased Lund racings tuning mainly for the ghost cam to get that older sound out of the truck since driveability wont be a factor. I installed the ghost cam tuning and I get nothing, I’ve...
About a month ago I decided to take the terminator to town and on the way back I found a dodge charger to play around with. While I was messing with him my rear diff began to lock up. (Come to find out it was leaking fluid). So now it's time to rebuild the differential. I haven't taken it apart...
So last night I cranked my car for the first Time in 2 days to just run to my buddies house right down the road. I was barely creeping along and the car started sputtering as I would give it a little throttle. Then I looked down at my a/f gauge and it was at 10.1 when it's normally around...
I'm needing a driver rear cv axle. I'm sure they are all the same but I can't find a lot of info on them. The broke axle I removed was a 31 spline on diff side and 28 spline on the wheel side.
I recently broke a irs axle at the track. I am having a very hard time finding a replacement axle. The axle I pulled out is 31 spline on the diff end and 28 spline on the outer hub end. Is this correct? Everything I see leads me to believe they should both be 31 spline? Also will a master pro...
I just left HMP with a broke car. I was able to make two passes before the passenger side rear axle gave up. The best time I had was 1/8 7.6 with a 1.71 60ft car was spinning bad on the nitro 315 555r. How do these times sound? My mods are in sig. Was running 100hp shot
I finally got a chance to take off and get the car tuned. On motor it made 480 hp to the rear wheel. And on a 100 shot of nitrous it only made 546. The tuner thought I was getting some spark blow out. Do y'all have any suggestions on why I only had so little gains when I was expecting any where...
I'm installing a NOS WOT/RPM activated window switch. Which wire do I tap into for rpm reading, and which wire on the TPS? I assume the middle wire on the TPS from what I can remember this is the signal wire. Thanks for the help
I have a chance to buy a NOS nitrous kit
For a fair price. My
Question is are my
Mods enough? Mods are attached in the pics. Let me know what you guys think!
What do I have to do to get 15"x 10" wheels to fit. I've searched with little to no luck. I've found a GREAT deal on two wheels and tires but I don't want to spend money if I can't make them work. Car is weekend cruiser and track car. Please let me know ASAP. I'm waiting on him to tell me the...
If the guy doesn't back out, I'm supposed to see what this hell cat is all about! Riding in the hell cat, it feels like it's going to be a close race considering he spins like craZy! What do you guys think?!
I'm going to data log my car tomorrow and see if I got all the bugs worked out. Can someone please tell me what I need to log? I'll be using sct x3. TIA
Yesterday I was messing with the car trying to figure out the little hiccups I have and I seen on here where someone else had suggested another member to put his car in "test Mode" with the trip button. So I scrolled over to the fuel pressure. I was seeing around I want to say 160 at idle and...
Im getting a P0122 code. I checked voltage coming in key on engine off and got 4.92 volts out of the number 3 port and teasted for ground on the number 1 port. I plugged it back in probed the middle wire and had .96 volt at "idle" and 4.66 volts at WOT. Why would I be getting this code? should I...
So my car is at the shop waiting to get Dyno tuned. Im wondering what kind of Hp numbers its going to make. Here is a list of mods. Steggy stage 4 ported blower, throttle body and plenum, 2.93 upper pulley, KB BAP, LFP heat exchanger, BBK CAI, 60lb injectors, Diablosport mafia, Moroso coolant...
When I purchased the car the a/c wasn't working, I have charged the system, but the blower only blows out of the defrost. I unplugged the "tree" behind the glove box and I don't feel any vacuum there what so ever. Should there be attest one that has vacuum that feeds the switch? I looked under...
Ok guys I'm sure this question has been beat to death but I can't find my answer! I have a 2003 with a Steggy stage 4 port. 2.9 upper pulley, 6# lower. I'm only seeing 12-13 lbs out of it and that seems low to me???
Has anyone here used Dallas Mustang to tune their car? If so was it a good experience or bad i live in between houston and dallas. The shops that everyone has told me about in houston are all booked up for next two months