Thanks for all the advice guys. I am so happy to report that I have had success in getting the install bolt removed. I used the slow drilling trick. Found that there was just a small lip, so I tried a flat blade screw driver and a hammer to tap and it stared to move. It turns out the bolt was...
I have tried drilling and I think I'm going to have to get better drill bits. It is very very hard. I hope an easy out will get it. Thanks for information on how far back the pulley should be.
Hey guys I went to swap out my stock pulley today and found the little plug was installed funky. I slipped a screw drive behind it and it popped off. Then I get my first look at the pull shaft and I see that there appears to be a broken install bolt in the snout. I have tired a few things to see...
Guys,
My buddies 08 GT500 is a non-stock clutch, and we don't know what it is. About a month ago the clutch master cylinder went out and was replaced. Since then we have been trying to bleed this dang thing. Today we got a vacuum pump and rubber plug. To do the 15-20 inches of vacuum in the...