Search results

Need an o2 sensor wire harness. Connects under airbox, harness runs around front of engine to o2 connectors and one other connector. I'd assume 87 to 93 should be the same. Unless you specifically know it's different. Car is a 93 GT. PayPal ready. If your not running your o2 sensors, let me know...

Preferably not leaking with working fans. Let me know what you have. A pm is easiest way to contact me. Thanks.

I'm sure we've all seen Toby's thread on his super clean Tork Tech install? Was gonna copy his design on his coolant crossover pipe. However, on my Tork Tech crossover, there are the two main tubes that go to each side of manifold. But mine has a 3rd, smaller coolant line coming from the...

Anybody know what the stock dimensions are on an 04 heat exchanger? Need to get a bracket built at work for a HE coming Thursday. Really appreciate it.

Got my TT kit finally buttoned up. Drive tune loaded and started. Went real smooth. Fired right up and ran awesome. No leaks. Couple minor set backs. TPS had to be lengthened, along with IAT. My stock cobra MAF bolt holes didn't line up with the bolt holes in my JLT High Boost CIA. Also had...

Stock or aftermarket. PM me with what you have. PayPal ready.

Finishing up my Tork Tech build. Have a few parts if anybody is interested. Cheap. All parts are stock. Throttle body - TPS - IAC - K&N air filter - Plenum - EGR - Intake manifold - MAF - Injectors (pink 21.5#) - Snorkel intake and tube Car just turned 80k but it was babied its whole life...

Got the pulley bridge on. Alternator mounted to bridge. Now, I personally called TT and talked to Bill a couple weeks ago when waiting for my kit to ship. I had asked if I use my factory sized accessory belt or do I need a custom sized belt. He assured me that I use the factory belt. So, I get...

Ive been reading tobynt thread when he did his TT kit. Flawless install. http://www.svtperformance.com/forums/showthread.php?826230-Tork-Tech-Terminator-Install I was going to vent both my valve cover vents to my Moroso oil breather catch can. His was a Jegs brand. But basically the same...

Vacuum routing question. There are 3 nipples on back of blower (4 total). One large upper 1/2", an upper and lower 3/8", and the one on the plenum. FRPS, Vac/Boost gauge, and upper nipple on boost bypass valve to 3/8" lower nipple back of blower. Boost side. Small diameter canister...

Let me know what you have. PM me...

Been about a month. But the day has finally come. Should have by weekend. Now to begin the tear down of my GT and get it prepped and ready. Question. I bought NGK TR6 spark plugs. What should I gap them at? Friend with an 03 Cobra says .035". Just want to make sure its not something different...

GT only has 8" wide front wheels. Used these to widen out the front a little. I eventually went with 1" spacers. Would be perfect for a rear 10.5" set up that is close to rubbing. Besides a little rust residue from wheel hub and wheel, they are in perfect condition. Some steel wool and they...

GT only has 8" wide front wheels. Used these to widen out the front a little. I eventually went with 1" spacers. Would be perfect for a rear 10.5" set up that is close to rubbing. Besides a little rust residue from wheel hub and wheel, they are in perfect condition. Some steel wool and they...

Buying new seal kit for my stock cobra fuel injectors. The kit comes with new filters. Either plastic or steel filters, but not both. Should I get the plastic or steel? Or does it really matter? Thanks in advance for any info.

Hey guys. I went to install my Billetflow hub. Don't have the fancy expensive tool. I used a socket, washer, and a couple 8mm bolts of different lengths. Went on nicely by hand till about halfway. Then got tough. So, broke out the 1/2" impact. That took it on about 3/4 the way until the...

My new bumper came with new brackets. These are off my old bumper. $30 shipped. No fees. PM me...

Have a 3.1 upper pulley. No hub. Some of the black anodizing is wearing off, but is straight and still works great. Could possibly be painted? Sanded? Super cheap. $35 shipped. No fees. PM me...

Talking with a dude who did the TT in his 02 GT. I got the cobra pumps installed. He is running 2 FPDMs. Wired in parallel (I think he said). This a must? TT says nothing about this. Thanks for any heads up on this.

Have a 3.1 with hub. Want a 2.93. Are they different hubs? Or will my hub work? Thanks.

Prefer black in color. PM me. Hub not needed.

So, I got my Centerforce DF and Fidanza aluminum flywheel installed last night. Finished around midnight. My first one. Did my wideband this morning. Got exhaust back on, leak free. I followed AM's Spec clutch install guide. And following the Fidanza and Centerforce instructions as well. Pilot...

In preparation for my Tork Tech. A list of the things I already have and have already done. Basically for my own reference. * - Already have for build ** - Already done **Steeda full length subframe connectors. Few months ago. **Swapped vac gauge for boost/vac gauge. Same time. **MGW STS. Few...

My ARP flywheel bolts came with this packet of Fastener Assembly Lube. My Fidanza aluminum flywheel instructions say to use Loc-Tite on the threads. My FRPP pressure plate bolt kit came with red Loc-Tite already applied to threads. Please don't think this is a stupid question, but do I use any...

Santa came early for me this year. For those who don't know, I ordered my Tork Tech kit last Friday. Will be a few weeks. In the meantime, need to prepare my trans for the build. I originally ordered the FRPP aluminum flywheel. But, turns out its discontinued for the TR3650 6 bolt. So ordered...