40k miles and car has just a 2.93 pulley and intake/exhaust.
Also has a brand new rear end. Everything was replaced, Full tilt boogie racing kit as well.
Okay so this spring i'm gonna try to address this issue. The car has an extremely heavy clutch.
Actually had a stress fracture from driving it in my foot lol. Seems to be way too heavy. It's a Ram HD i believe. The car has issues engaging into first sometimes at a stop. I've adjusted the cable...
Yeah, figured someone would want it. Even after my pinion gear shattered like a piece of glass the diff cover never leaked or broke with this on it. So it seems to do the job.
Red BilletFlow IRS brace
I just had the rear rebuilt at the end of the summer with a Ford Racing Cover.
So now this is just taking up space. $100 shipped
Okay , So I had a previous post about vibrations and sounds coming from the rear end. It has been decided that it needs a rebuild.
The car is mostly street driven. Dunno if i'd ever take it to the track for a pull or not (most likely not). So with that in mind I figured I would run it by you...
*Can bad diff bushings cause rear-end vibrations?*
My 03 is getting some rear end vibrations once over 40 MPH and also an occasional clunk in the floor during braking with clutch in. The clunking happened a few times. From what I have read the clunk is a cause from bad diff bushings correct...
Like the title says I'm looking for a 03 - 04 cobra seat bottom cover that is in good condition (tear / stain free). Looking for the driver side bottom but I can make a passenger side work maybe. Let me know what you have.
Looking for for a decent condition seat bottom cover for my 03 cobra with grey insert.
Need driver side but I can make a passenger side one work let me know what you have.
So like the title says my reverse lights won't come on. I can't figure it out and it is really pissing me off:mj:.
I had ordered the Raxiom smoked taillights and Plug and Play Sequential wiring kit w/v1 Flash modifier.
After install I noticed a couple nights later that my reverse lights were not...
So as the title states my pinion flange is leaking. Car is still garaged for now but i wanna get everything ready that ill need to fix the problem. So other than the $30 flange is there any other parts i should have on hand ? I seen a kit on LMR for $100 and was wondering if that was necessary...
So I was reading through this section a week ago and found some H&R Race springs that seemed too good of a deal to pass up.
So I purchased them and come to find out it was for the rears only. Failure to read on my part not the sellers fault.
Anyhow if anyone has a set of H&R racing springs...
WTB 03-04 Cobra within 5 hours of PITT
Looking for 03-04 cobra within 5 hours driving of Pittsburgh PA.
I don't mind mods within reason. Would like to have less that 60k mileage.
As far as colors go. Anything but yellow would work.
and i'm trying to stay below $21k
Thanks,
John