Search results

Been looking for one since they were discontinued, let me know if you have one!

Hey guys, I've been working on this for the past couple months and have been talking with people on corral.net, but the issue is still happening and I feel like more eyes would be extremely beneficial. The car is a manual swapped 4.3l (originally 3.8) 2000 v6 mustang. The problems: Trying to...

Hey guys, I'm looking to swap a t56 into my 3.8 w/ irs. Basically, I need everything for a 5.0l swap (windsor) including the 03/04 cobra driveshaft. I don't have an unlimited budget, I'm looking to spend under 2k for everything, i'll spend more on a good deal.

Hey guys, I just picked up a near complete irs, the only things i need are a new half shaft, a new drivers side wheel hub, and a Ford Performance diff cover. Please let me know what you have and what you're willing to sell it for. Please keep in mind, this is a budget build.

I've been looking for info and/or pictures of a radiator tuck specifically on the new edge bodystyle. I'm getting rid of my condenser and with the mods I am planning to do in the upcoming year I need to push the radiator further forward to fit an aftermarket radiator. Any info would be great!

I need to space out my current wheels since they are rubbing on my coilovers, I want to use 1/2" spacers (hub centric) but I'm not sure if I'll have enough threads leftover after. Any input would be great!

Hey guys, I'm looking at some wheels and I was wondering if 235x50x18 tires would fit. They'd come with the rims so that's why I'm asking.

Hey guys, for some reason while cruising I can hear (and feel through vibrations) my engine pulsing like a sin wave. It doesn't pulse while in neutral or at low speeds, but from 45+ you can start to hear and feel it. Any ideas what could be going on? It's annoying and seems to gradually be...

So my Fiance' bought me a membership with one of the HPDE groups over here in Arizona (ProAutosports). I had an absolute blast and thought I would share one of the runs I made. Albeit it's not my favorite run, I don't sound like a dumbass talking to my ride-along. Enjoy and let me know what you...

Hey guys, I'm doing a hydroboost swap with my v6 and I need a pair of the gt power steering lines that go from the power steering rack to the hydroboost assembly. If you have a set or know where I can get one please let me know!

Hey guys, some shit happened and I ended up stripping the insides of where the bolt that holds the steering wheel in place goes into. I can't for the life of me find a replacement and I need one asap since this is my dd. Please let me know if you have any ideas!! Thanks!

My fiance' has been really wanted a truck to go off roading with and she found one she really likes for a decent price. We're going to check it out tomorrow and I was hoping to get some input on what to watch out for and anything I should specifically check. I know to look at the brakes, tires...

I was looking at hydraulic clutches and saw that they only make them for the GT's. What's the reason that they only sell them for GT's and what can I do to install it in my 2000 v6? The reason I'm asking is because I will be doing a t-56 swap before I put on my procharger (should be making...

Hey guys, I'm looking to get a 99-01 OEM Cobra Font Bumper. I would prefer it has all of the accessories including lip but that's not required. Painted or unpainted is fine.

Hey guys, I have a 2000 v6 and I just purchased an 03 cobra brake kit for it, now I'm looking for some stainless steel lines to finish it off. Let me know what you got!

Hey guys, I'm in the process of rebuilding my 2000 v6 and I'm trying to figure out if it's alright to mix two used forged pistons with four brand new forged pistons. Any feedback would be awesome!

Hey guys, I'm looking to buy a set of front and rear (fronts only is fine, too) cobra/bullit/mach 1 brakes. I'm only looking for brakes + rotors in good condition. Please let me know what you have. Thanks!

I'm looking for the mounting hardware for the interior trim piece, PN# N804537-S. They should look like this: Thanks!

Hey guys, I am repairing curb-rash on some Mach 1 wheels that I picked up. Unfortunately while I was working I didn't notice that some of the tape I was using came off and while sanding I put some light scratches in the clear-coat. The scratches in the clear-coat came out a milky-white color and...

Hey guys, I got a pair of strange front struts and a set of UPR Coilovers to go with them. The springs I needed are 14" -175lb, which I ordered, but when I got the springs they only measure to be ~7in hign..Is this how high it's supposed to be, or did I get the wrong springs? Thanks!

Hey guys, I'm currently building my v6 in the next two weeks. I'm going completely forged for now, then p1sc with 10lb boost in ~1 year. Before I build my car I'm trying to figure out if I should get a cam thrust bearing or not. With the p1sc I should be pushing ~430rwhp when compared to...

**No longer looking, thanks SVTP

Hey guys, I have been looking around for this for a while and I can't find anything.. I want to keep my stock a/c knobs but I want to change the blue insert to a red insert (or even clear). Has anyone done this or know if I would be able to buy the inserts? Thanks!

Hey guys, I recently purchased a set of BC Racing rear coilovers for my 2000 v6 mustang. I need to get a set for the front but I was wondering if there would be any issues with running two different brand coilovers in the front and rear. Unfortunately BC Racing coilovers only come in complete...

Looking for both, can be seperate if needed.